PROGRAM
All Symposia / Complete Program
All Symposia Complete Program Program at a Glance Search Presentation

Complete Program

14:0017:10
14:00 - 17:10
14:00 - 17:10
  • ITC - International Tribology Council in session meeting
15:0018:00
OCEANIA IV
15:00 - 18:00
Forum Young Tribologists: Elevator Pitches
15:00 - 18:00
  • T14-S01.1
    15:00 - 15:05Young Tribologist Elevator Pitches
    4FDQ - From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
    YUAN, Y. - University of Leeds
  • T14-S01.2
    15:05 - 15:10Young Tribologist Elevator Pitches
    4F6X - Effect of Surface Texturing on Plasto Hydrodynamic Lubrication of Coated Forming Tools
    OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas
  • T14-S01.3
    15:10 - 15:15Young Tribologist Elevator Pitches
    4EKZ - Development of a Computational and Experimental Framework for Tool Surface Texture Design in Sheet Metal Forming
    GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
  • T14-S01.4
    15:15 - 15:20Young Tribologist Elevator Pitches
    4EGF - Elasto-hydrodynamic Analysis of Non-Conformal Lubricated Contact
    NASCA, L. - Politecnico di Bari
  • T14-S01.5
    15:20 - 15:25Young Tribologist Elevator Pitches
    4EMJ - Multiscale surface engineering enhances multifunctionality in wet environments
    ROGKAS, N. - National Technical University of Athens
  • T14-S01.7
    15:30 - 15:35Young Tribologist Elevator Pitches
    4EK2 - Role of Nanoparticles on Liquid Superlubricity across Lubrication Regimes of Non-Conformal Contacts
    DANĚK, L. - Brno University of Technology
  • T14-S01.8
    15:35 - 15:40Young Tribologist Elevator Pitches
    4EYS - Water-Lubricated Superlubricity of SiC/YAG–RHA Coatings Produced by SPS
    CASTRO, F. D. D. - Universidade Federal de Pelotas
  • T14-S01.9
    15:40 - 15:45Young Tribologist Elevator Pitches
    4EYE - From Friction Reduction to Friction Orchestration: Toward Sustainable Superlubricity
    ZUBIETA-LABORDE, P.m - Centrale Lyon
  • T14-S01.10
    15:45 - 15:50Young Tribologist Elevator Pitches
    4FBC - Design of Novel Space Environment-Adaptive Lubricating Films Inspired by In-Orbit Exposure Findings
    HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T14-S01.11
    15:50 - 15:55Young Tribologist Elevator Pitches
    4FAX - Modification of load capacity property on a lubricant grease railway system contaminated with water
    Ruiz R.R - Instituto Politécnico Nacional
  • T14-S01.12
    15:55 - 16:00Young Tribologist Elevator Pitches
    4DTP - Impact of water contamination on greases used in railway systems
    PEREZ, J. A. G. - Instituto Politécnico Nacional
  • T14-S01.13
    16:00 - 16:05Young Tribologist Elevator Pitches
    4EEH - Exploring How Atomic-Scale Tribochemistry Establishes the Paradigm for Wafer-Scale Global Planarization of Advanced Integrated Circuits
    ZHANG, L. - Tsinghua University
  • T14-S01.14
    16:05 - 16:10Young Tribologist Elevator Pitches
    4EHD - Tribochemistry of iron oxide and DBP interactions in electrified environments.
    MENEZES, L. R. - Universidade Federal de Uberlândia
  • T14-S01.15
    16:10 - 16:15Young Tribologist Elevator Pitches
    4EPJ - Modeling in Tribology under Electrification
    ZHU, Z. - Imperial College London
  • T14-S01.16
    16:15 - 16:20Young Tribologist Elevator Pitches
    4F46 - Geometrical properties of asperities on real contact area
    KUZMAN, M. - Univerza v Ljubljani
  • T14-S01.18
    16:25 - 16:30Young Tribologist Elevator Pitches
    4E2P - Tribo-AID Kit: An Open-Hardware, Portable Tribometer for Education and Reproducible Testing
    ORGELDINGER, C. - University of Bayreuth
  • T14-S01.19
    16:30 - 16:35Young Tribologist Elevator Pitches
    4EHJ - Numerical approach of different tribological wear tests
    SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo
  • T14-S01.20
    16:35 - 16:40Young Tribologist Elevator Pitches
    4EJM - Tribology in hydrogen environments: development of experimental methodologies, analysis of mechanisms and evaluation of the influence of microstructure and surface
    AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
  • T14-S01.21
    16:40 - 16:45Young Tribologist Elevator Pitches
    4EHM - Slurry Erosive Wear of DLC (a-C) Coatings
    OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
  • T14-S01.22
    16:45 - 16:50Young Tribologist Elevator Pitches
    4EY6 - DLC Coatings for Erosion and Scaling Resistance
    CAMPOREZ, R. M. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
  • T14-S01.23
    16:50 - 16:55Young Tribologist Elevator Pitches
    4F4Y - Wear and fretting resistance of gas nitride layers on 3D-printed titanium alloys
    LAVRYS, S. - Vytautas Magnus University
  • T14-S01.24
    16:55 - 17:00Young Tribologist Elevator Pitches
    4DSB - Ultrahigh Thermally Conductive Ag-Coated Basalt Fibers with Hierarchical Nanostructured Interfaces for Improved Anti-Wear Properties of Self-Lubricating Fabric Composites
    ZHU, C. - Donghua University
  • T14-S01.25
    17:00 - 17:05Young Tribologist Elevator Pitches
    4F4Z - Plasma surface alloying: enhancing the tribological performance of automotive tooling materials through surface engineering
    PIGOSSO, T. - Universidade Federal de Santa Catarina
  • T14-S01.26
    17:05 - 17:10Young Tribologist Elevator Pitches
    4EPM - EVALUATION OF ZINC ADHESION ON CAST IRON TOOL MATERIALS
    BASTOS, P. P. B. - Universidade Federal de Santa Catarina
  • T14-S01.27
    17:10 - 17:15Young Tribologist Elevator Pitches
    4FBJ - Influence of Surface Pre-Treatment on the Adhesion of Patinas Formed on a New Weathering Steel
    MENDES, H. E. G. - Universidade Federal do Rio Grande
  • T14-S01.28
    17:15 - 17:20Young Tribologist Elevator Pitches
    4EBZ - Tribological Analysis of Drill Rig Jaws: A Proposal for Wear Mechanism Characterization
    SILVA, K. F. C. - Instituto Tecnológico Vale
  • T14-S01.29
    17:20 - 17:25Young Tribologist Elevator Pitches
    4EWS - Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
    A.R. Cárdenas - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
  • T14-S01.31
    17:30 - 17:35Young Tribologist Elevator Pitches
    4EWK - Polymer Based Composites for Tribology
    MENDONÇA, A. S. D. - Universidade Federal de Santa Catarina
  • T14-S01.32
    17:35 - 17:40Young Tribologist Elevator Pitches
    4ETT - Engineering Interfacial Adhesion of Thin Polymer Films with Nanoscale Heterogeneities
    MAJHI, C. - Indian Institute of Technology Kanpur
  • T14-S01.33
    17:40 - 17:45Young Tribologist Elevator Pitches
    4EBK - Titanium, hydroxyapatite, and bioglass coatings for enhancing the PEEK orthopaedic implants performance
    SANTOS, M. G. - Universidade Tecnológica Federal do Paraná
  • T14-S01.34
    17:45 - 17:50Young Tribologist Elevator Pitches
    4ETZ - What activities are beneficial for the knee joint?
    ASHIK, A. K. - Imperial College London
  • T14-S01.35
    17:50 - 17:55Young Tribologist Elevator Pitches
    4EXS - The Potential of Solid Lubricants as Friction and Wear Modifiers in Restorative Materials for Dentistry
    RODZIEWICZ-WEREMCZUK, M. - Bialystok University of Technology
  • T14-S01.36
    17:55 - 18:00Young Tribologist Elevator Pitches
    4FDR - Multiscale Numerical Approach for Subject-Specific Wear Prediction of Total Knee Replacements
    FEILE, K. - Friedrich-Alexander-Universität Erlangen-Nürnberg
18:0019:30
18:00 - 19:30
18:00 - 19:30
  • W - Welcome Reception
09:0009:45
EUROPA III-IV
09:00 - 09:45
09:00 - 09:45
  • O - Opening Ceremony
09:5010:50
EUROPA III-IV
09:50 - 10:50
Plenary
09:50 - 10:50
  • P01.14FCD - Enabling the Electric Vehicle Revolution: Overcoming Materials and Tribological Challenges for a Green and Sustainable Transportation Future
    ERDEMIR, A. - Texas A&M University
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
EUROPA III-IV
11:30 - 12:30
Plenary
11:30 - 12:30
  • P02.14FCG - Advances of Solid-Liquid Combined Superlubricity (SLCS)
    LUO, J. - Tsinghua University
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
  • PJA01.14DY2 - Harmonious Tribo-Interfaces Enabled by Soft Matters
    ZHOU, F. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 01
14:40 - 16:00
  • T06-S01.1
    14:50 - 15:20Keynote Speaker
    4FDG - Tribo-surface and volume properties of laser powder bed fused (LPBF) H13 tool steel in hot die-casting applications
    MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
  • T06-S01.2
    15:20 - 15:40Oral presentation
    4DMG - How to understand the influence of ammonia on piston ring-liner tribology system?
    MA, X. - Harbin Engineering University
  • T06-S01.3
    15:40 - 16:00Oral presentation
    4DV4 - Influence of steel cleanliness on the sliding wear resistance of railway wheels
    João Vitor Raimundo Silva e Silva - Universidade Federal do Espírito Santo
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 01
14:40 - 16:00
  • T03-S01.1
    14:55 - 15:20Invited Speaker
    4EBF - Active Bio-Contact Mechanics and Regenerative Rehabilitation of Osteoarthritic Joints
    POPOV, V. L. - Technische Universität Berlin, Tsinghua University
  • T03-S01.2
    15:20 - 15:40Oral presentation
    4DNP - Linking Current Density to Wettability and Tribological Properties of Anodized 5083-Aluminum Alloys
    ABID, M. - Université de Technologie de Tarbes
  • T03-S01.3
    15:40 - 16:00Oral presentation
    4DTJ - Efficient characterization of extreme pressure properties of lubricants using advanced 4-ball test methodology
    KHOSLA, T. - Rtec Instruments Inc.
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 01
14:40 - 16:00
  • T12-S01.1
    14:50 - 15:20Keynote Speaker
    4FCA - Bridging Lab and Factory: Practical Applications of Ultra High Vacuum Tribology
    BROITMAN, E. - Sentys Inc
  • T12-S01.2
    15:20 - 15:40Oral presentation
    4DNX - Ultra-low energy, temperature field measurement (TFM)-based early failuredetection of plain bearings
    BASZENSKI, T. - RWTH Aachen University
  • T12-S01.3
    15:40 - 16:00Oral presentation
    4DT2 - Calorimetric analysis of cracking under fretting loading: endurance curve and cumulative damage method
    Bruno BERTHEL - École Centrale de Lyon
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 01
14:40 - 16:00
  • T02-S01.1
    14:50 - 15:20Keynote Speaker
    4FBY - Friction and Wear Control of Key Components in Marine Power System
    YUAN, Chengqing - Wuhan University of Technology
  • T02-S01.2
    15:20 - 15:40Oral presentation
    4DMD - A Path Towards Superlubricity in Real EHL Contacts
    HABCHI, W. - Lebanese American University
  • T02-S01.3
    15:40 - 16:00Oral presentation
    4EKX - Boundary lubrication performance of pure glycerol on steel-bronze contact
    POKHAREL, N. - Luleå University of Technology
OCEANIA III
14:40 - 16:00
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 01
14:40 - 16:00
  • T13-S01.1
    14:50 - 15:20Keynote Speaker
    4FD2 - How AI Is Accelerating Materials Discovery and What Tribology Can Do Next
    Sparks, T. - University of Utah
  • T13-S01.2
    15:20 - 15:40Oral presentation
    4DPC - A Data-Driven Framework Using Bayesian Optimization and Surrogate Models for the Accelerated Multi-Objective Design of Tribological Components
    César Pastor - Robert Bosch GmbH
  • T13-S01.3
    15:40 - 16:00Oral presentation
    4DQH - Physics-Informed Neural Network Framework for Static and Dynamic Performance Prediction of 3D Hydrodynamic Journal Bearings
    MARIAN, M. - Leibniz University Hannover, Pontificia Universidad Católica de Chile
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 01
14:40 - 16:00
  • T05-S01.1
    14:50 - 15:20Keynote Speaker
    4FDC - Keynote talk - prof. Seong H. Kim
    KIM, S. H. - Pennsylvania State University
  • T05-S01.2
    15:20 - 15:40Oral presentation
    4DPS - Effect of PIB Succinimide Dispersant on the Stability and Tribological Performance of MoS₂ Nanoparticle Dispersions in PAO
    Fabrice Dassenoy - École Centrale de Lyon
  • T05-S01.3
    15:40 - 16:00Oral presentation
    4DWX - Film Formation Behavior of Nanoparticles under Rolling Contact Lubrication
    SUNAGAWA, Y. - Idemitsu Kosan Co.,LTd.
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 01
14:40 - 16:00
  • T10-S01.1
    14:50 - 15:20Keynote Speaker
    4E6F - Multiscale Contact Mechanics with Applications
    PERSSON, B. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T10-S01.2
    15:20 - 15:40Oral presentation
    4DMS - Assessment of Electrically Induced Bearing Damage in EV Powertrains
    MANJUNATH, M. - Ghent University / Universiteit Gent
  • T10-S01.3
    15:40 - 16:00Oral presentation
    4DNZ - Prognosis of Thermal Critical Conditions of Planetary Plain Bearings in Wind Turbine Gearboxes
    Benjamin Lehmann - RWTH Aachen University
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 01
14:40 - 16:00
  • T04-S01.1
    14:55 - 15:20Invited Speaker
    4FAG - Hydration Superlubricity: The Mechanism and Application
    ZHANG, C. - Tsinghua University
  • T04-S01.2
    15:20 - 15:40Oral presentation
    4DME - Hydrated Ions and Hydration Superlubricity
    HAN, T. - Tsinghua University China
  • T04-S01.3
    15:40 - 16:00Oral presentation
    4DQB - Study on Friction Mechanism and Application of Nano-TiO2 Additive with Different Structures under Extreme Working Conditions
    LI, H. - Shanghai Advanced Research Institute, Chinese Academy of Sciences
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 01
14:40 - 16:00
  • T01-S01.1
    14:50 - 15:20Keynote Speaker
    4ESE - Atomic-level design for tribo-materials: a brief overview
    MA, T. - Tsinghua University
  • T01-S01.2
    15:20 - 15:40Oral presentation
    4DMK - Laser Surface Texturing for Enhanced Tribological Performance of Polyetheretherketone (PEEK)
    Laura Peña Parás - Universidad de Monterrey
  • T01-S01.3
    15:40 - 16:00Oral presentation
    4DMN - Optimization of Cutting Tool Life Through Laser Surface Texturing and Extreme Pressure Lubricants
    Demófilo Maldonado Cortés - Universidad de Monterrey
14:5016:00
OCEANIA IV
14:50 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 01
14:50 - 16:00
  • T07-S01.1
    14:50 - 15:20Keynote Speaker
    4DNS - Long Life Liquid-Like Solid Lubricants for Extreme Space Environments
    Christopher DellaCorte - University of Akron
  • T07-S01.2
    15:20 - 15:40Oral presentation
    4DMV - A self-adaptive supramolecular gel lubricating material for space applications
    Meirong Cai - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T07-S01.3
    15:40 - 16:00Oral presentation
    4DSE - Evaluation of Al- and Cu-based sacrificial abradable coatings for aerospace applications
    Bruno Edu Arendarchuck - Concordia University Montreal
OCEANIA V
14:50 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 01
14:50 - 16:00
  • T08-S01.1
    14:50 - 15:20Keynote Speaker
    4DXW - LipoGels: Robust self-lubricating physically cross-linked alginate hydrogels embedded with liposomes
    BRISCOE, W. - Bristol University
  • T08-S01.2
    15:20 - 15:40Oral presentation
    4DMZ - Towards Understanding the Protective Lubrication Mechanisms of Mucous Layers
    GAMANIEL, S. S. - University of Twente / Universiteit Twente
  • T08-S01.3
    15:40 - 16:00Oral presentation
    4DNN - Bio-Inspired Hierarchical Laser Texturing for Enhanced Tribological Performance of Aluminum Alloys
    Mohamed Abid - Université de Technologie de Tarbes
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4017:40
EUROPA III-IV
16:40 - 17:40
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 02
16:40 - 17:40
  • T06-S02.1
    16:40 - 17:00Oral presentation
    4DN2 - Integration of Electric Arc Furnace (EAF) Steel Slag into Friction Materials: Tribological Properties, Wear, and Emissions
    Giovanni Straffelini - University of Trento
  • T06-S02.2
    17:00 - 17:20Oral presentation
    4DPD - Surface analysis deployment for automotive brake system assessment
    Ana Paula Gomes Nogueira - Brembo NV
  • T06-S02.3
    17:20 - 17:40Oral presentation
    4DV2 - Atomic Level Material Removal Mechanism of Chip Surface
    QIAN, L. - Southwest Jiaotong University
OCEANIA-VIII
16:40 - 17:40
Surface Metrology and Contact Mechanics - Session 02
16:40 - 17:40
  • T03-S02.1
    16:40 - 17:00Oral presentation
    4DWN - Multimode Visible Optical Force Microscopy for Characterization of Two-Dimensional Materials and Nano Through-Silicon Vias
    TAN, X. - Tsinghua University
  • T03-S02.2
    17:00 - 17:20Oral presentation
    4DZB - The Λ*-ratio for circular EHL contacts: robustness, sensitivity, and validity
    HANSEN, J. - Lulea University of Technology / Luleå tekniska universitet, TRATON Group
  • T03-S02.3
    17:20 - 17:40Oral presentation
    4E2E - Analyzing an entire scratch cross-sectionally in a TiN film
    WU, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA II
16:40 - 17:40
Sustainable Tribology - Green Tribology and Energy Transition - Session 02
16:40 - 17:40
  • T02-S02.1
    16:40 - 17:00Oral presentation
    4DPQ - A Novel Triple-row Roller Bearing Test Rig for Evaluation of Grease Performance in Wind Turbines
    Yonggang Meng - Tsinghua University
  • T02-S02.2
    17:00 - 17:20Oral presentation
    4DPR - Friction and wear behaviour of PLA-based bio-composites reinforced with oleaginous flax shives
    MATHIAS, L. - Université de Technologie de Tarbes
  • T02-S02.3
    17:20 - 17:40Oral presentation
    4DPV - Impact of oil reconditioning on physico-chemical properties and tribological performance of lubricating oils.
    Myrna Carolina Cortes Morales - Lulea University of Technology / Luleå tekniska universitet, SKF RecondOil
OCEANIA III
16:40 - 17:40
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 02
16:40 - 17:40
  • T13-S02.1
    16:40 - 17:00Oral presentation
    4DR2 - A machine learning based approach for the estimation of the global energy losses of cylindrical roller bearings
    Felix Pfister - Friedrich-Alexander-Universität Erlangen-Nürnberg, Engineering Design
  • T13-S02.2
    17:00 - 17:20Oral presentation
    4DR6 - Machine-Learning Potentials for First-Principles Prediction of Tribochemical Reaction Rates
    Wilfred T Tysoe - University of Wisconsin-Milwaukee
  • T13-S02.3
    17:20 - 17:40Oral presentation
    4DRQ - Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
    Adrián Ricardo Cárdenas Flórez - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
OCEANIA IV
16:40 - 17:40
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 02
16:40 - 17:40
  • T07-S02.1
    16:40 - 17:00Oral presentation
    4DNJ - Special Lubricants and Technologies for Space Science
    Weimin Liu - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T07-S02.2
    17:00 - 17:20Oral presentation
    4DNK - From the Shenzhou-7 Manned Spaceship to the China Space Station: The Tribological Journey of Solid Lubricating Films in Low-Earth Orbit
    HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T07-S02.3
    17:20 - 17:40Oral presentation
    4DSD - Tribological behavior of Inconel 718 and Cr2O3 coatings in high-temperature steam environments for gas turbine engine applications
    Matheus da Silva Pinto - Concordia University
OCEANIA V
16:40 - 17:40
Biotribology, Biomimetics and Food Tribology - Session 02
16:40 - 17:40
  • T08-S02.1
    16:40 - 17:00Oral presentation
    4DNV - Investigation of tactile perceptual descriptors by vibrotactile rendering
    Livia Felicetti - Institut national des Science Appliquées de Lyon, Università degli Studi di Roma La Sapienza
  • T08-S02.2
    17:00 - 17:20Oral presentation
    4DPP - A Customized Tribometer for Assessing Cartilage Tribological Behavior Under Physiologically Representative Knee Joint Loading
    Haytam Kasem - Azrieli College of Engineering
  • T08-S02.3
    17:20 - 17:40Oral presentation
    4DRG - Exploring the Application of Nonlinear Analysis Methods in Studying Friction in Dental Glass-Ionomer Cements
    Magdalena Lepicka - Bialystok University of Technology
OCEANIA VI
16:40 - 17:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 02
16:40 - 17:40
  • T10-S02.1
    16:40 - 17:00Oral presentation
    4DPH - Stochastic process model of elastoplastic rough surface contact with scale-dependent hardness
    Yang Xu - Hefei University of Technology
  • T10-S02.2
    17:00 - 17:20Oral presentation
    4DQE - In-situ Observation of High-Temperature Polymer Transfer Films
    Shouyi Yin - Imperial College London
  • T10-S02.3
    17:20 - 17:40Oral presentation
    4DRJ - A multiscale approach for the contact and gas flow rate through flat circular large contact
    Mihai ARGHIR - Université de Poitiers
OCEANIA VII
16:40 - 17:40
Nanoscale Mechanisms of Friction and Lubrication - Session 02
16:40 - 17:40
  • T04-S02.1
    16:40 - 17:00Oral presentation
    4DNR - Carbon Dot-based Ionic Liquids: A Novel Additive for Lubrication and Corrosion Inhibition Application
    Songwei Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T04-S02.2
    17:00 - 17:20Oral presentation
    4DPM - Projection-based Hyper Reduction for the Full-System Finite Element Solution of the Mixed Thermal Elastohydrodynamic Lubrication Line Contact Problem
    Alain El Hajj - École Nationale Supérieure des Arts et Métiers
  • T04-S02.3
    17:20 - 17:40Oral presentation
    4DPT - Direct Observation and Quantification of the Lubrication Mechanism of Metal Disulfide Nanoparticles by In Situ TEM Nano-Friction Tests
    Fabrice Dassenoy - École Centrale de Lyon
OCEANIA X
16:40 - 17:40
Surface Engineering - Session 02
16:40 - 17:40
  • T01-S02.1
    16:40 - 17:00Oral presentation
    4DMX - Humidity-Driven Tribological Mechanisms of Ground Micro-Arc Oxidation Coatings on Aluminium Alloy
    Karl Delbé - Université de Technologie de Tarbes
  • T01-S02.2
    17:00 - 17:20Oral presentation
    4DNM - Tribologically Modified Tooth Geometries of Worm Wheels using AutomatedOptimization Algorithm
    Luis Haug - Technical University of Munich, Gear Research Centre
  • T01-S02.3
    17:20 - 17:40Oral presentation
    4DPJ - Molybdenum Coatings for Extreme Environments: Tribological Study of PVD and APS Coatings
    Ricardo Alves da Silva Crespo Martins - Leibniz University Hannover
16:4018:00
OCEANIA I
16:40 - 18:00
Tribomechadynamics, Tribotests and Monitoring - Session 02
16:40 - 18:00
  • T12-S02.1
    16:40 - 17:05Invited Speaker
    4DYT - Advancements in Triboacoustics and its Integration in Tribological Practices:A Case Study with the Triboacoustic Pin
    SCHIRRU, M. - Austrian Centre of Competence for Tribology - AC2T research GmbH
  • T12-S02.2
    17:05 - 17:25Oral presentation
    4EXP - Investigations of lubricated parallel sliding contacts on a ring on disc tribometer
    Poll, G. - Leibniz University Hannover
  • T12-S02.3
    17:25 - 17:45Oral presentation
    4EXY - Lab-scale testing and performance screening of gear oils
    KIND, N. - German Aerospace Center
OCEANIA IX
16:40 - 18:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 02
16:40 - 18:00
  • T05-S02.1
    16:40 - 17:00Oral presentation
    4DRD - Evolution of the tribofilm and wear state transition mechanism of cylinder liner and piston ring
    Chang Ge - Harbin Engineering University
  • T05-S02.2
    17:00 - 17:20Oral presentation
    4DS2 - Mechanochemistry of Ashless Antiwear Additive
    Chung Yan Leung - Imperial College London
  • T05-S02.3
    17:20 - 17:40Oral presentation
    4DSP - Tribological response of ceramic–graphene composites under ASTM G133: role of counterface, carbon content and environment
    Céline TREVISIOL - Centre Technique des Industries Mécaniques
  • T05-S02.4
    17:40 - 18:00Oral presentation
    4EYY - Elastohydrodynamic Film Thickness and Traction at High Speeds
    VANISRI, N. - Imperial College London
18:2019:20
EUROPA III-IV
18:20 - 19:20
18:20 - 19:20
  • YRT - Forum Young Tribologists - Roundtable Mentoring
19:3021:30
19:30 - 21:30
19:30 - 21:30
  • FYT - Forum Young Tribologists - Evening
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
  • P03.14FCJ - Biolubrication: from basics to applications
    KLEIN, J. - Weizmann Institute of Science
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 03
09:30 - 10:50
  • T06-S03.1
    09:30 - 09:50Oral presentation
    4DPN - Heat-Treatment Effects on Microstructure and Wear of L-PBF 316L Stainless Steel
    German Omar Barrionuevo - Universidad San Francisco de Quito
  • T06-S03.2
    09:50 - 10:10Oral presentation
    4DXT - Hydrogen-Related Alterations in Aluminum Alloy Piston Materials for Hydrogen Combustion Engines Following Deuterium Irradiation
    MATSUMOTO, Y. - Tokyo City University
  • T06-S03.3
    10:10 - 10:30Oral presentation
    4EXQ - Tribochemical Processing of Carbonates: Advancing Low Carbon and Sustainable Industrial Technologies
    NEVSHUPA, R. - CSIC
  • T06-S03.4
    10:30 - 10:50Oral presentation
    4EDX - Flexible, transparent and conductive silver line electrodes fabricated using surface energy-directed assembly process on polyethylene naphthalate substrates
    WANG, Y. - Tsinghua University
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 03
09:30 - 10:50
  • T03-S03.1
    09:40 - 10:10Keynote Speaker
    4FD6 - Advancing the Characterization of Surfaces: The Surface-Topography Challenge Continues
    JACOBS, T. - University of Pittsburgh
  • T03-S03.2
    10:10 - 10:30Oral presentation
    4EAR - A Review of Asperity Persistence, Fully Plastic Real Contact Pressure and Hardness
    JACKSON, R. L. - Auburn University
  • T03-S03.3
    10:30 - 10:50Oral presentation
    4EAY - Can we trust optical profilometry for tribofilm topography measurements? A polymer transfer film case study
    YAP, K. K. - Imperial College London
OCEANIA I
09:30 - 10:50
Tribomechadynamics, Tribotests and Monitoring - Session 03
09:30 - 10:50
  • T12-S03.1
    09:30 - 09:50Oral presentation
    4DNE - From Mechanisms to Lifetime: New Insights into Grease Lubrication
    GREBE, M. - Technical University Mannheim
  • T12-S03.2
    09:50 - 10:10Oral presentation
    4DRV - Oil performance loss in wet brakes and clutches
    WIRKNER, J. - Technical University of Munich, Gear Research Center
  • T12-S03.3
    10:10 - 10:30Oral presentation
    4ECH - Oil Level Effects on Kinematics and Hydraulic Losses in Spherical and Full-Complement Roller Bearings Under Low Load to Prevent Smearing
    BRILL, K. M. - RPTU University Kaiserslautern-Landau
  • T12-S03.4
    10:30 - 10:50Oral presentation
    4EZE - Frictional Instabilities in Elastomer Contacts
    REDDYHOFF, T. - Imperial College London
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 03
09:30 - 10:50
  • T02-S03.1
    09:45 - 10:10Invited Speaker
    4FD4 - Invited Talk - Dr. Arup Gangopadhyay
    Gangopadhyay, Arup - Ford Motor Co.
  • T02-S03.2
    10:10 - 10:30Oral presentation
    4DRF - Effect of Methanol Engine Environment on Oil Degradation and Tribological Behavior of the Cylinder Liner
    Yufan Zhu - Harbin Engineering University
  • T02-S03.3
    10:30 - 10:50Oral presentation
    4DRH - Thermo-Mechanical and Tribological Behaviour of Epoxy–Based Composites for Lined Rock Cavern Hydrogen Storage
    Gustavo Nogueira Lopes da Silva - Lulea University of Technology / Luleå tekniska universitet
OCEANIA III
09:30 - 10:50
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 03
09:30 - 10:50
  • T13-S03.1
    09:30 - 09:50Oral presentation
    4DVN - Predicting DLC Coating Wear: Role of Material Descriptors in Deep Learning and Physics-Constrained Models
    Imène Lahouij - École des Mines de Paris
  • T13-S03.2
    09:50 - 10:10Oral presentation
    4DVS - A Generalised Bearing Fault Diagnosis Model Based on Advanced Signal Processing Techniques and Multimodal Self-Supervised Learning
    Amirmasoud Kiakojouri - University of Southampton
  • T13-S03.3
    10:10 - 10:30Oral presentation
    4DZW - Machine-learning-enabled interpretation of tribological deformation patterns in large-scale MD data
    EHRICH, H.J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
  • T13-S03.4
    10:30 - 10:50Oral presentation
    4DT6 - Multi-Scale Insight into Green Lubrication: Coupling ML-driven Molecular Dynamics and Experiments for Bio-derived Additives
    Sophie Loehlé - TotalEnergies
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 03
09:30 - 10:50
  • T05-S03.1
    09:45 - 10:10Invited Speaker
    4FDF - From EV Shaft Currents to Electrically Stimulated Lubricants: A New Paradigm for Friction and Wear Control
    FARFAN-CABRERA, L. I. - Tecnológico de Monterrey
  • T05-S03.2
    10:10 - 10:30Oral presentation
    4DQS - Tribocatalytic Carbon Tribofilm for Ultra-Low Wear of PEEK Composites under Fuel Lubrication
    Chao Wang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T05-S03.3
    10:30 - 10:50Oral presentation
    4DW2 - Tribo-chemical analysis of a next-generation, fire-resistant, hybrid silicone-based oil
    Thomas LUBRECHT - Centrale Lyon, NYCO Research Laboratory
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 03
09:30 - 10:50
  • T10-S03.1
    09:40 - 10:05Invited Speaker
    4DR4 - Modelling of friction in wet grinding processes
    Michael Müller - Technische Universität Braunschweig
  • T10-S03.2
    10:10 - 10:30Oral presentation
    4DT4 - From Parametric Asperity Model to Local Micropitting Risk Map for Gears
    MARZOUG Abdellah - Institut national des Science Appliquées de Lyon
  • T10-S03.3
    10:30 - 10:50Oral presentation
    4DTC - MD simulations of rough contacts: Aqueous vs. oil-based lubrication
    Shubham Agarwal - Universität des Saarlandes
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 03
09:30 - 10:50
  • T04-S03.1
    09:45 - 10:10Invited Speaker
    4EQA - Multiscale modeling of capillary adhesion and friction
    PASTEWKA, L. - Universität Freiburg
  • T04-S03.2
    10:10 - 10:30Oral presentation
    4DSG - Fracture Initiation and Crack Propagation in Linear Viscoelastic Materials
    Giuseppe Carbone - Nanjing University of Science & Technology, Politecnico di Bari
  • T04-S03.3
    10:30 - 10:50Oral presentation
    4DVF - Ultrafast dynamics of electronic friction energy dissipation in defective semiconductor monolayer
    Huan Liu - Tsinghua University
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 03
09:30 - 10:50
  • T01-S03.1
    09:35 - 10:00Invited Speaker
    4DVW - Design of macroscale solid superlubricating surface on steel substrate
    WANG, C. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T01-S03.2
    10:00 - 10:20Oral presentation
    4DPY - Defect-controlled hydrogenated tetrahedral amorphous carbon with enhanced corrosion and wear resistance in NH4OH dilute environment
    Jae-Il Kim - Korea Institute of Materials Science
  • T01-S03.3
    10:20 - 10:40Oral presentation
    4DQW - Transition Metal Carbo Chalcogenides (TMCCs): a novel family of 2D solid lubricants
    Edoardo Marquis - Technische Universität Wien
09:4010:50
OCEANIA IV
09:40 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 03
09:40 - 10:50
  • T07-S03.1
    09:45 - 10:10Invited Speaker
    4FDH - Invited talk - Amir Kadiric
    KADIRIC, A. - Imperial College, Imperial College London
  • T07-S03.2
    10:10 - 10:30Oral presentation
    4DSK - Spatially Heterogeneous Superwettability in Groove Surfaces: Anchored Plastron for Underwater Drag Reduction
    Zhitao Huang - Tsinghua University
  • T07-S03.3
    10:30 - 10:50Oral presentation
    4EKP - Dynamics of Cage-free Ball Bearings under acceleration condition
    CAO, W. - Sichuan University
OCEANIA V
09:40 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 03
09:40 - 10:50
  • T08-S03.1
    09:40 - 10:10Keynote Speaker
    4EQJ - A Multi-Station Rolling–Gliding Apparatus to Evaluate Cartilage Wear for Hemiarthroplasty
    A. WIMMER, Markus - Rush University Medical Center
  • T08-S03.2
    10:10 - 10:30Oral presentation
    4DRX - In-Vitro Testing of Amorphous Carbon Coated Implants in a Servohydraulic Knee Simulator
    Kevin Neusser - Friedrich-Alexander-Universität Erlangen-Nürnberg, Engineering Design
  • T08-S03.3
    10:30 - 10:50Oral presentation
    4DSF - Surface-Grafted Polymers for Adhesion and Friction Control
    LI, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 01
Poster Session 01
10:50 - 11:30
  • 01.14EFT - Duplex Treatement of AISI H13 Tool Steel: Hot-Forging Testing
    NORA, J. V. P.D. - Universidade Federal do Rio Grande do Sul
    Track: 01 - Surface Engineering
  • 01.24F6N - Influence of the Wetting Angle of DLC Coatings Deposited on AISI 2205 in Pinon-Disk Wear Tests
    LIMA, A. B. D. - Universidade Tecnológica Federal do Paraná
    Track: 01 - Surface Engineering
  • 01.34ECS - Comparative analysis and optimization of tribological properties of burnished and vapour-blasted surfaces using TOPSIS
    DZIERWA, A. - Rzeszow University of Technology
    Track: 01 - Surface Engineering
  • 01.44EG4 - Evaluation of friction and electrochemical behavior of UHMWPE biopolymer against CoCrMo
    César Sedano de la Rosa - Universidad de Guadalajara
    Track: 01 - Surface Engineering
  • 01.54E4X - Tribological analysis of scratch resistance in plasma-sprayed thermal barrier coatings (TBCs)
    REIS, D. A. P. - Universidade Federal de São Paulo
    Track: 01 - Surface Engineering
  • 01.64EVC - Study of tribological and corrosion properties of two-layer coatings based on TiO2-Cr2O3/Ta
    KAKIMZHANOV, D. - Shakarim University
    Track: 01 - Surface Engineering
  • 01.74F6W - Tribological Behaviour of DLC-Coated Surfaces Under Electrified Lubricated Sliding Contacts
    PEREIRA, D. G. - Universidade Federal de Santa Catarina
    Track: 01 - Surface Engineering
  • 01.84EGM - Influence of Surface Free Energy on the Slurry-Jet Erosion Behavior of Thermally Sprayed Ceramic Coatings
    GRZEBIELUCKA, E. C. - Universidade Tecnológica Federal do Paraná
    Track: 01 - Surface Engineering
  • 01.94EHS - Tribological Behavior of Copper-Coated Basalt Fiber Reinforced Composites for EMI Shielding Applications
    YOON,G. - Changwon National University
    Track: 01 - Surface Engineering
  • 01.104EHG - Scratch Response in SS316L Across Rolling, Powder Metallurgy, and Additive Manufacturing
    MACHADO, I. F. - Universidade de São Paulo
    Track: 01 - Surface Engineering
  • 01.114EFW - Evaluation of the tribocorrosion behavior in seawater of multilayers Cr/CrC/Cr/DLC/Cr/CNx/Cr/DLC deposited by HiPIMS on AISI 4317 steel.
    CHAGOYA-SERNA, J. - Universidad de Guadalajara
    Track: 01 - Surface Engineering
  • 01.124EJF - Tribological properties of Fe-Cu-Ni sinters prepared by ball milling and hot pressing
    BOROWIECKA-JAMROZEK, J. - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.134EZF - Wear behaviour of coatings processed by PTA-DED modified by pre-deposition of graphene nanoplatelets and graphite particles
    SIPPEL, J. F. - Universidade Federal do Paraná
    Track: 01 - Surface Engineering
  • 01.144EF2 - Analysis of wear behavior of single- and multilayer coatings subjected to cyclic micro-impact loading
    KRUPA, J. - AGH University of Krakow
    Track: 01 - Surface Engineering
  • 01.154ERG - Analysis of Dry Wear of Non-Heat-Treated Martensitic Stainless Steel Coating Applied in the Thermomechanical Steelmaking Process
    NOVOA, J. - Universidade Federal de Pelotas
    Track: 01 - Surface Engineering
  • 01.164EBS - Tribological Performance of Epoxy Composites Reinforced with Tailings of Scheelite
    SOUZA, J. R. D. - Universidade Federal Rural do Semi
    Track: 01 - Surface Engineering
  • 01.174EJW - Abrasive Wear and Friction Behaviour of 60%WC–NiCrBSi Hardfacing Pad Welds Modified with Rare Earth Oxides
    KASIŃSKA, J. . - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.184EQC - Comparison of tribological properties of CrN and CrN/DLC coatings under lubrication with Ringer's solution and artificial saliva
    RADOŃ-KOBUS, K. J. - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.194EQG - The effect of the concentration of 1-butyl-3-methylimidazolium methanesulfonate in the coolant on the tribological properties of a TiAlN coating
    RADOŃ-KOBUS, K. J. - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.204F6Z - Friction and Wear Behavior of Vacuum-Sintered WC–Co with Recycled Grinding Sludge
    VIEIRA, L. - Instituto Tecnológico de Aeronáutica
    Track: 01 - Surface Engineering
  • 01.214E6P - Mechanical and tribological properties of DLC/MoS2 adaptive coatings
    KOT, M. - University of Krakow
    Track: 01 - Surface Engineering
  • 01.224F62 - Tribocorrosion and Scratch Behavior in Synthetic Seawater of DLC/CrC/CNx/CrC/Cr Multilayers Deposited by HIPIMS
    MARTÍNEZ, M. F. - Universidad de Guadalajara
    Track: 01 - Surface Engineering
  • 01.234E4H - Friction and Adhesion of Superhidrophobic and Icephobic Concrete Coatings
    NOSONOVSKY, M. - University of Wisconsin-Milwaukee
    Track: 01 - Surface Engineering
  • 01.244EHN - Effect of microstructure on the friction and wear mechanisms at the shoulder-clip interface in ductile cast iron railway components
    MACHADO, N. K. D. V. - Universidade Federal de Ouro Preto
    Track: 01 - Surface Engineering
  • 01.254FBS - Roughness and Friction of Textured and Coated Skin-Pass Work Rolls
    MONTEIRO JR., P. L. - Universidade Federal de Uberlândia
    Track: 01 - Surface Engineering
  • 01.264F4P - Wear resistance of duplex coatings on Ti–6Al–4V alloy obtained by nitriding with subsequent PVD deposition of TiN and ZrN
    BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
    Track: 01 - Surface Engineering
  • 01.274F4Q - Wear-resistant plasma-electrolytic oxidation coatings on Ti–6Al–4V alloy synthesised in an aluminate electrolyte containing chromium oxide
    BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
    Track: 01 - Surface Engineering
  • 01.284FDM - Synergistic integration of ionic liquid and lubricant microcapsules for epoxy coatings with concurrent self-healing and superior wear resistance
    YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 01 - Surface Engineering
  • 01.294F2Q - Build-height microstructural gradients as the primary driver of dry-sliding wear in WAAM ER308LSi
    DALCIN, R. L. - Universidade Federal de Santa Maria
    Track: 01 - Surface Engineering
  • 01.304F2A - Morphology-driven tribological performance of FFF-3D printed PLA composites reinforced with carbonaceous fillers
    DALCIN, R. L. - Universidade Federal de Santa Maria
    Track: 01 - Surface Engineering
  • 01.314FDS - Low-Friction Boron-Doped Hydrogenated DLC Coatings under High-Temperature and High-Vacuum Environments
    ZHANG, R. - Institute of Science Tokyo
    Track: 01 - Surface Engineering
  • 01.324ERH - Evolution of surface topography and micromechanical properties in polyurethane rail pads with service time
    PAULA, S. B. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
    Track: 01 - Surface Engineering
  • 01.334EF6 - Evaluation of friction and electrochemical properties between PEEK biopolymer and Ti6Al4V alloy immersed in SBF
    TOPETE-VELASCO, S. I. - Universidad de Guadalajara
    Track: 01 - Surface Engineering
  • 01.344F4S - Effect of preliminary nitriding on fretting resistance of bioactive coating on Ti-6Al-4V alloy
    LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine
    Track: 01 - Surface Engineering
  • 01.354F4V - Combining physical and diffusion surface treatments for enhance the mechanical and tribological properties of titanium alloy
    LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Vytautas Magnus University
    Track: 01 - Surface Engineering
  • 01.364EXE - Influence of DLC Deposition Parameters on Tribological Properties of X38CrMo16 Tool Steel
    DRABIK, S. - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.374EYH - Gray Cast Iron coated with Inconel 625 via plasma sintering.
    CARMO, T. J. D. - Universidade de São Paulo
    Track: 01 - Surface Engineering
  • 01.384ER6 - Effect of a Cr/CrC/TaCr/TaC/DLC multilayer coating deposited by HiPIMS on the tribocorrosion behavior of a biomedical CoCrMo alloy
    GARCÍA-RAMÍREZ, U. A. - Instituto Tecnológico José Mario Molina Pasquel Y Henríquez, Universidad de Guadalajara
    Track: 01 - Surface Engineering
  • 01.394EX4 - Tribocorrosion in Grinding Media: Evaluation Using an Adapted Wet Rubber Wheel Test – ASTM G105
    CAMPIDELI, V. C. - Instituto Tecnológico Vale
    Track: 01 - Surface Engineering
  • 01.404ESK - Microstructure and Tribological Properties of Cold Sprayed Amorphous Coatings
    WOJCIECH ŻÓRAWSKI - Kielce University of Technology
    Track: 01 - Surface Engineering
  • 01.414F4J - Tribological Characterization of a Laser-Processed Metal Matrix-Carbide Reinforced Composite
    CHABAK, Y. - Institute of Materials Research, Slovak Academy of Science
    Track: 01 - Surface Engineering
  • 01.424ERE - Laser Irradiation Effect on Friction Behaviour at Sliding Interfaces of Various DLC Coatings
    NAKAMURA, Y. - Kyoto University
    Track: 01 - Surface Engineering
  • 01.434ETC - Friction Characteristics of Valve Plate Pair of Servo Motor Pump for Launcher TVC Actuator Application
    JIANGYU, Z. - Beihang University (Beijing University of Aeronautics and Astronautics)
    Track: 01 - Surface Engineering
  • 01.444E2D - Study on the relationship between viscosity, wear debris, and lubrication regimes under three-body lubricated conditions
    HORNG, J. H. - National Cheng Kung University
    Track: 03 - Surface Metrology and Contact Mechanics
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 04
11:30 - 12:30
  • T06-S04.1
    11:30 - 11:50Oral presentation
    4DRR - AISI 420S Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated States: Characterization and Tribological Performance
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • T06-S04.2
    11:50 - 12:10Oral presentation
    4DSA - Experimental investigation of tire-wear particle sizes
    GACHOT, C. - Technische Universität Wien
  • T06-S04.3
    12:10 - 12:30Oral presentation
    4ETE - Green Stainless Steels as Wear Resistant Materials for Erosion-Corrosion Applications in the Agribusiness Sector
    SOUZA, V. P. D. - Aperam South America, Universidade Federal de Minas Gerais
OCEANIA-VIII
11:30 - 12:30
Surface Metrology and Contact Mechanics - Session 04
11:30 - 12:30
  • T03-S04.1
    11:30 - 11:50Oral presentation
    4EC4 - Applying Persson’s model for manufacturing metal-polymer bonded contacts
    PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
  • T03-S04.2
    11:50 - 12:10Oral presentation
    4E4M - Angle-Resolved and Feature-Based Approaches to Surface Texture Analysis - A Correlation Study
    EIFLER, M. - IU International University of Applied Sciences
  • T03-S04.3
    12:10 - 12:30Oral presentation
    4ECV - Triboinformatics: Topological Data Analysis for rough surfaces
    NOSONOVSKY, M. - University of Wisconsin-Milwaukee
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 04
11:30 - 12:30
  • T12-S04.1
    11:30 - 11:50Oral presentation
    4DMF - Measurement of fundamental – basic Quantities in Piston Cylinder Assemblies: Techniques, Repeatability, Limitations and Benefits
    DELLIS, P. - National Technical University of Athens
  • T12-S04.3
    11:50 - 12:10Oral presentation
    4DSV - Characterization of Sealing Material Behavior Under Dry Sliding Conditions for a Rotary Compressor Prototype
    AUSSERER, F. - Technische Universität Wien
  • T12-S04.2
    12:10 - 12:30Oral presentation
    4DMT - Friction Behavior of mTBM Disc Cutter Ring Under a Reciprocating Test
    PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 04
11:30 - 12:30
  • T02-S04.1
    11:30 - 11:50Oral presentation
    4DS6 - Performance of sustainable sealing materials in hydrogen
    Geraldine Theiler - Federal Institute for Material research and Testing
  • T02-S04.2
    11:50 - 12:10Oral presentation
    4DSN - Hard chrome substitution under tribological challenges: comparative study of EHCP and various coatings technologies
    Céline TREVISIOL - Centre Technique des Industries Mécaniques
  • T02-S04.3
    12:10 - 12:30Oral presentation
    4DSR - ML-prediction of the Electrical Contact Resistance at the GDL–BPP Interface
    Víctor Román - Flow & Optimization, Software & Services, Technische Universität Wien
OCEANIA III
11:30 - 12:30
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 04
11:30 - 12:30
  • T13-S04.1
    11:30 - 11:50Oral presentation
    4DYR - Wear Behavior Characterization through Deep Embedding Clustering
    SIEBERG, P. M. - Universität Duisburg Essen
  • T13-S04.2
    11:50 - 12:10Oral presentation
    4E4C - Enabling AI in Tribology through FAIR Knowledge Graphs
    GARABEDIAN, N. - datin GmbH
  • T13-S04.3
    12:10 - 12:30Oral presentation
    4EPE - Digital Twins of Lubricated Systems and Their Evolution
    KALIAFETIS, F. - Imperial College London
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 04
11:30 - 12:30
  • T07-S04.1
    11:30 - 11:50Oral presentation
    4DV6 - Friction-Induced Nonequilibrium Phase Transformation of Low-Temperature Ice
    Hong Liang - Texas A&M University
  • T07-S04.2
    11:50 - 12:10Oral presentation
    4DVD - Influence of Lead on the Tribological Performance and Wear Mechanisms of CuSn-Based Coatings
    AHMED, T. - Concordia University
  • T07-S04.3
    12:10 - 12:30Oral presentation
    4F6F - Effects of Hydrogen Aging on the Tribology of Molybdenum Disulfide (MoS2)
    KRICK, B.A. - Florida Agricultural & Mechanical University, Florida State University
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 04
11:30 - 12:30
  • T05-S04.1
    11:30 - 11:50Oral presentation
    4DWD - Interpreting oscillatory-shear measurements of viscosity in unbounded flows to understand shear-thinning behavior of lubricants in lubricated contacts
    EHRICH, H. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
  • T05-S04.2
    11:50 - 12:10Oral presentation
    4DTM - Molecular Origins of Fluid Viscosity: From Shear-Thinning to Glass Formation
    Wilfred T Tysoe - University of Wisconsin-Milwaukee
  • T05-S04.3
    12:10 - 12:30Oral presentation
    4DXQ - Deteriorative Effect of Water on the Boundary Lubrication Performance of Engine Oils
    LI, W. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 04
11:30 - 12:30
  • T08-S04.1
    11:30 - 11:50Oral presentation
    4DTF - Non-invasive Characterisation of Skin Mechanics and the Effects of Menopause and Ageing
    Margarida M.L.D Santos - Imperial College London
  • T08-S04.2
    11:50 - 12:10Oral presentation
    4DTW - Frictional Shear Stress Drives Particle Transport in Cartilage-like Hydrogels
    Ahmed Al Kindi - University of California Santa Barbara
  • T08-S04.3
    12:10 - 12:30Oral presentation
    4EFQ - Side-group-mediated friction of amphiphilic copolymer-doped hydrogels
    ZHAO, P. - Weizmann Institute of Science
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 04
11:30 - 12:30
  • T10-S04.1
    11:30 - 11:50Oral presentation
    4DTY - Surface tension and wettability effects in EHL contacts
    Abdelhadi FAKKAR - Institut national des Science Appliquées de Lyon
  • T10-S04.2
    11:50 - 12:10Oral presentation
    4EQH - Experimental Parameter Study on Starved Lubricated Macroscopic Contacts
    KAMPEN, K. - Technische Universität Braunschweig
  • T10-S04.3
    12:10 - 12:30Oral presentation
    4DXJ - How fluid is distributed in a friction gap during mixed lubrication
    FRÄGER, T. - Technische Universität Braunschweig
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 04
11:30 - 12:30
  • T04-S04.2
    11:50 - 12:10Oral presentation
    4DXS - Structure and Superlubricity Mechanism of Confined Hydrated Ions
    LI, Y. - Tsinghua University
  • T04-S04.3
    12:10 - 12:30Oral presentation
    4DXY - Phase Transition Structural Superlubricity
    JIN, B. - Tsinghua University, University of Cambridge
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 04
11:30 - 12:30
  • T01-S04.1
    11:30 - 11:50Oral presentation
    4DQY - Accelerated Evaluation of Coating Performance Through Parallel Testing
    Lais M. Lopes - Falex Tribology
  • T01-S04.2
    11:50 - 12:10Oral presentation
    4DRP - The Promise of Solid Lubricants
    MARQUIS, E. - Technische Universität Wien
  • T01-S04.3
    12:10 - 12:30Oral presentation
    4DRZ - Tribological Behavior of Magnetron-Sputtered MAX Phases: The Role of Surface Oxides
    Ronja Anton - German Aerospace Center
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
OCEANIA IV
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture - Anton Paar
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
  • PJA02.14FCM - How Surface Topography and Chemistry Control Lubrication
    CAYER-BARRIOZ, J. - Ecole Centrale de Lyon
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 05
14:40 - 16:00
  • T06-S05.1
    14:40 - 15:00Oral presentation
    4DQZ - Development of a Wear Test Method for Emulsion Performance Evaluation
    Lais M. Lopes - Falex Tribology
  • T06-S05.2
    15:00 - 15:20Oral presentation
    4DVV - Comparison of severe and mild wear test conditions for assessing low-stress sliding mild abrasive wear of commercial transfer chute lining materials
    Jose Jimmy Penagos - Instituto Tecnológico Vale
  • T06-S05.3
    15:20 - 15:40Oral presentation
    4DWF - Influence of counterpart and oil formulation on wear of DLC-coated differential shafts for electric vehicles
    DUFILS, J. - IREIS - HEF Group
  • T06-S05.4
    15:40 - 16:00Oral presentation
    4DWP - Tribological Comparison of Pantograph Contact Materials for Railway Sliding Electrical Interfaces
    OUMER, O. - Université Marie-et-Louis-Pasteur
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 05
14:40 - 16:00
  • T03-S05.1
    14:40 - 15:00Oral presentation
    4EDK - Effect of pigment volume concentration on scratch resistance of polyurethane and polyester coil coatings paint.
    MILLE, N. - Université de Strasbourg
  • T03-S05.2
    15:00 - 15:20Oral presentation
    4EGN - Theoretical and experimental study of the roughness effect in normal contact of deformable bodies
    BUKOVSKII, P. - Ishlinsky Institute for Problems in Mechanics RAS
  • T03-S05.3
    15:20 - 15:40Oral presentation
    4EKF - Friction reduction of paraffin-based mineral oils in low-temperature environments
    DAICHI, M. - Nagoya University
  • T03-S05.4
    15:40 - 16:00Oral presentation
    4F4E - Sliding contact temperature determination using acicular grindable thermocouple and inverse heat conduction
    NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 05
14:40 - 16:00
  • T12-S05.1
    14:50 - 15:20Invited Speaker
    4F2E - Fretting Wear of Oscillating Ball Bearing
    NELIAS, D. - Laboratoire de Mécanique des Contacts et des Structures
  • T12-S05.2
    15:20 - 15:40Oral presentation
    4F2C - Tribological Investigations under Varying Pressure Atmosphere
    ZAK, F. - Optimol Instruments Prüftechnik GmbH, Technische Universität München
  • T12-S05.3
    15:40 - 16:00Oral presentation
    4F6T - Development of an Experimental Apparatus for Investigating Preload Loss in Bolted Joints under Cyclic Shear Loading
    CUNHA, B. S. C. - Laboratorio de Tecnologia em Atrito e Desgaste
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 05
14:40 - 16:00
  • T02-S05.1
    14:40 - 15:00Oral presentation
    4DST - Tribofilm Formation of Lubricant Additives in Ammonia Atmosphere
    Jie Zhang - Imperial College London
  • T02-S05.2
    15:00 - 15:20Oral presentation
    4DSX - Lubricity of Ethanol-Containing Gasoline
    Jie Zhang - Imperial College London
  • T02-S05.3
    15:20 - 15:40Oral presentation
    4DTA - Efficiency of sampling airborne wear particles generated by a pin-on-disc setup
    NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
  • T02-S05.4
    15:40 - 16:00Oral presentation
    4DTK - What is a wear part?
    Mathias woydt - MATRILUB
OCEANIA III
14:40 - 16:00
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 05
14:40 - 16:00
  • T13-S05.1
    14:40 - 15:00Oral presentation
    4EAA - i-TRIBOMAT: A Global Knowledge and Data Hub for Tribology
    BORRAS, X. - i-TRIBOMAT: The European Tribology Centre
  • T13-S05.2
    15:00 - 15:20Oral presentation
    4EDP - Tool Wear–Driven Tribological Evolution in Surface Milling of Aluminum using Explainable AI
    KNOBLAUCH, R. - École Nationale Supérieure des Arts et Métiers
  • T13-S05.3
    15:20 - 15:40Oral presentation
    4EZC - Data-Centric Investigation of Galling
    KUPELIOGLU, A. - University of Southampton
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 05
14:40 - 16:00
  • T07-S05.1
    14:40 - 15:00Oral presentation
    4FBF - Fretting Wear of High-Temperature Coatings in Flat-on-Flat Contacts for Gas Turbine Blade Tip Applications
    Lavella, M. - Università degli Studi di Bergamo
  • T07-S05.2
    15:00 - 15:20Oral presentation
    4DWQ - Tailoring Mechanical and Tribological Performance of Fabric Composites via Microcapsule Size Design
    YANG, Mingming - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T07-S05.3
    15:20 - 15:40Oral presentation
    4DXC - Concept of Steady-State Fluid Drag Reduction Based on Biomimetic Superhydrophilic Interfaces
    YANG, W. F - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T07-S05.4
    15:40 - 16:00Oral presentation
    4DXV - Polysilazane-Based Multifunctional Integrated Coating
    YU, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 05
14:40 - 16:00
  • T05-S05.1
    14:40 - 15:00Oral presentation
    4E2Z - Size-driven tribo-chemical activity: Near-atomic-scale phosphorus-based particles enable self‑adaptive high‑stress macro-superlubricity via refactoring the carbon-based film from lubricating oil
    GAO, P. - Tsinghua University
  • T05-S05.2
    15:00 - 15:20Oral presentation
    4E4P - Self-Lubricating PEEK Composite Based on Mechanically Responsive Hydrogel Microcapsules
    XU, W. - Tsinghua University
  • T05-S05.3
    15:20 - 15:40Oral presentation
    4E4R - Neutron reflection Characterisation of Lipid Analogues Adsorption at Steel/water Interface for Water-based Lubrication
    HU, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T05-S05.4
    15:40 - 16:00Oral presentation
    4E66 - Tribochemistry of iron oxide and DBP interactions in electrified environments.
    MENEZES, L. R. - Universidade Federal de Uberlândia
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 05
14:40 - 16:00
  • T10-S05.1
    14:50 - 15:20Invited Speaker
    4E6T - Multiscale In Situ Investigations and Multiphysics Models of Aqueous Gel Interfaces
    PITENIS, A. A. - University of California Santa Barbara
  • T10-S05.2
    15:20 - 15:40Oral presentation
    4DXX - Synchrotron In-situ Investigation of Multi-scale Polymer Tribological Response
    ALGAZZAR, A. - Lulea University of Technology / Luleå tekniska universitet
  • T10-S05.3
    15:40 - 16:00Oral presentation
    4DYG - 3D adhesive contact mechanics: A variational energy-based approach
    SANTERAMO, M. - Politecnico di Bari
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 05
14:40 - 16:00
  • T04-S05.1
    14:50 - 15:20Keynote Speaker
    4FDB - To roll or not to roll? This is the question (at least for microparticles)
    Isa, Lucio - Swiss Federal Institute of Technology / Eidgenössische Technische Hochschule ETH Zürich
  • T04-S05.3
    15:40 - 16:00Oral presentation
    4E2A - Surface Polarity Dominates Hydration Lubrication via Interfacial Ion Configuration in the Helmholtz Plane
    HAN, J. - Tsinghua University
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 05
14:40 - 16:00
  • T01-S05.1
    14:40 - 15:00Oral presentation
    4DSJ - 3 in 1 powder coatings with implemented antifriction function
    Dr. Michaela Gedan-Smolka - Leibniz-Institut für Polymerforschung Dresden
  • T01-S05.2
    15:00 - 15:20Oral presentation
    4DSQ - Simulating Damage Mechanisms in Quasistatic Sliding Contact of Friction Enhancing Surface Structures
    Jonathan Schanner - Technische Universität Chemnitz
  • T01-S05.3
    15:20 - 15:40Oral presentation
    4DSS - Processing Relationships in Hybrid MXene Coatings for Advanced Solid Lubrication
    GACHOT, C. - Technische Universität Wien
  • T01-S05.4
    15:40 - 16:00Oral presentation
    4DTG - Understanding tribological behavior of new REACh compliants sealed anodization of aluminum alloys
    Marc Schmittbuhl - École Centrale de Lyon
14:5016:00
OCEANIA V
14:50 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 05
14:50 - 16:00
  • T08-S05.1
    14:55 - 15:20Invited Speaker
    4DMH - Gradients in Mucin: The Tear Film's Trick for Shear Invariance via Expanding Shear Zones
    SAWYER, W. G. - Moffitt Cancer Center
  • T08-S05.2
    15:20 - 15:40Oral presentation
    4DRW - Numerical Simulation of Third-Body Wear in Total Knee Replacements
    Klara Feile - Friedrich-Alexander-Universität Erlangen-Nürnberg
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:0016:40
America
16:00 - 16:40
Session
Poster Session 02
Poster Session 02
16:00 - 16:40
  • 02.14EZK - Deep learning and reactive force fields in the context of molecular dynamics simulations of doublewall carbon nanotube-based nanobearings friction performance
    C.S. Abreu - Instituto Superior de Engenharia do Porto
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.24E6V - Mechanisms of Grease Lubrication in Thermoplastics RollingSliding Contacts
    SCHMID, F. - Technical University of Munich, Gear Research Center
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.34DTT - Composite Nanolubricants for Wear Reduction in Mechanical Interfaces: Leveraging Diffusion and Atomic Disorder
    Hua Jiang - Hubei Longzhong Laboratory, Wuhan University of Technology
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.44EKG - Multiscale Screening of Self-Lubricating Graphene-Reinforced Epoxy and IPN Nanocomposites under Dry Sliding
    Maru, M.M. - National Institute of Metrology, Quality and Technology
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.54EBA - Geometrical properties of asperities on real contact area
    KUZMAN, M. - Univerza v Ljubljani
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.64EVH - Asperity sliding contact in the presence of adhesion
    Uzair Iqbal - Indian Institute of Science, Bengaluru
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.74DWA - Effect of Silver Addition on the Tribological Properties of High Entropy Alloys
    Wojciech Łoński - Łukasiewicz Research Network - Institute for Sustainable Technologies
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.84ECY - Real-Time Digital Image Correlation for In-Situ Analysis of Frictional Slip and Fracture in Tribological Contacts
    Yang, Y. - Nanjing University of Science & Technology
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.94E6X - Superlubrication and Energy Consumption of Two-Dimensional Materials
    LIU, Y. - Tsinghua University
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.104DVG - Influence of electrical current on the tribological performance of functionalized nanoparticles anti-wear additivesabstract for a poster
    Zhengyuan PENG - Centre de Mise En Forme de Matériaux
    Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
  • 02.114ENA - Self-lubricating High-Entropy Alloy & Transition Metal Dichalcogenide Composites: Tribological Performance and Mechanisms
    BYEON,D. - Changwon National University
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.124F6J - Effects of friction modifier on stick-slip properties of wet clutch tra nsmission fluid for AWD differentials
    TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.134EV4 - Evaluation of the Tribological Behavior of Greases: An Approach Based on Infrared Spectroscopy (FTIR) and Mini-Traction Machine Measurements
    ALMEIDA, L. S. - Universidade de São Paulo
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.144DP6 - Protic Oil-soluble Ionic Liquids: The Structure Design and Lubrication Mechanism Study
    HU, L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.154EYP - Effect of Graphene Additives on Inconel 625 Processed by Spark Plasma Sintering
    SILVA, N. M. - Escola Politécnica de Universidade de São Paulo
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.164DVY - Wear resistance of cermet titanium-based materials with hBN addition
    Remigiusz Michalczewski - Łukasiewicz Research Network - Institute for Sustainable Technologies
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
  • 02.174FAF - MoS2 Shell Microcapsules Assembled from Nanoflower Structures: A Stimuli-Responsive, High-Efficiency Lubricant
    WANG, T. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
16:4017:40
OCEANIA III
16:40 - 17:40
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 06
16:40 - 17:40
  • T13-S06.1
    16:40 - 17:00Oral presentation
    4EGG - A Predictive Framework for Friction and Wear of DLC Coatings Using Literature Data
    LAHOUIJ, I. - École des Mines de Paris
  • T13-S06.2
    17:00 - 17:20Oral presentation
    4EMG - Explainable Machine Learning for Predicting Galling in API Steels from Friction and Mechanical Data
    PRIETO, G. - Consejo Nacional de Investigaciones Científicas y Técnicas, Universidad Nacional del Sur
  • T13-S06.3
    17:20 - 17:40Oral presentation
    4ENK - Predictability and Explicability: an interpretable Deep-Learning model to predict friction from third body morphology
    BOULEFRAKH, K. - Institut national des Science Appliquées de Lyon
OCEANIA V
16:40 - 17:40
Biotribology, Biomimetics and Food Tribology - Session 06
16:40 - 17:40
  • T08-S06.1
    16:40 - 17:00Oral presentation
    4DZ4 - Biomimetic Design of MOFs-based Arthritis Lubricating Nanocarriers
    LIU, J. - Northwestern Polytechnical University
  • T08-S06.2
    17:00 - 17:20Oral presentation
    4DZH - Enhancing Tribological Performance and Wettability of Snakeskin-Inspired Surfaces via PDLLA Nanosheets
    IBRAHIM, M. D. - Universiti Malaysia Sarawak
  • T08-S06.3
    17:20 - 17:40Oral presentation
    4EFB - Active control of finger sliding friction with different surface roughness in SDS solutions for underwater surface haptics
    ZHOU, X. - Sichuan University
OCEANIA VI
16:40 - 17:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 06
16:40 - 17:40
  • T10-S06.1
    16:40 - 17:00Oral presentation
    4DZ6 - A Multiscale Transient Framework for Mixed Lubrication Modelling in Total Hip Replacement Bearings
    FURZE, R. - University of Leeds
  • T10-S06.2
    17:00 - 17:20Oral presentation
    4E2N - How Does Ammonia Alter Lubricant Performance: An Experimental and Molecular Dynamics Study on Microstructural Evolution and Viscosity Changes
    Xu,X. - Harbin Engineering University
  • T10-S06.3
    17:20 - 17:40Oral presentation
    4E4Y - Influence of roughness frequency cut-off in simulations of lubrication of rough surfaces
    BRUNETIERE, N. - Institut Pprime
OCEANIA VII
16:40 - 17:40
Nanoscale Mechanisms of Friction and Lubrication - Session 06
16:40 - 17:40
  • T04-S06.1
    16:40 - 17:00Oral presentation
    4DM4 - Structural Superlubricity: Why and How Does It Work under Ambient Conditions?
    MÜSER, M. H. - Universität des Saarlandes
  • T04-S06.2
    17:00 - 17:20Oral presentation
    4EA4 - Crystallinity-Dependent Tribological Behavior of Molybdenum Disulfide: Insights from Experiments and Atomistic Simulations
    WANG, Y. - Czech Technical University
  • T04-S06.3
    17:20 - 17:40Oral presentation
    4EB6 - Submicron scale asperity strain hardening
    KUZMAN, M. - Univerza v Ljubljani
OCEANIA X
16:40 - 17:40
Surface Engineering - Session 06
16:40 - 17:40
  • T01-S06.1
    16:40 - 17:00Oral presentation
    4DVE - Regulating Composition, Structure, and Friction Properties of Sputtered MoS₂ Films through Trace Metal (Pt, Au, Cu) Doping
    Bin Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T01-S06.2
    17:00 - 17:20Oral presentation
    4DWB - Influence of MoS₂ content on the tribological behavior of double-transfer solid lubrication systems
    Thomas Rey - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
  • T01-S06.3
    17:20 - 17:40Oral presentation
    4DWE - Tribological properties of DLC coatings in high-pressure gaseous hydrogen
    Johnny Dufils - IREIS - HEF Group
16:4018:00
EUROPA III-IV
16:40 - 18:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 06
16:40 - 18:00
  • T06-S06.1
    16:40 - 17:00Oral presentation
    4DWR - Atomistic study of material removal behavior during ultrasonic vibration assisted nanoscratching of single-crystal AlN
    XIAO, C. - Southwest Jiaotong University
  • T06-S06.2
    17:00 - 17:20Oral presentation
    4DWZ - Mechanistic analysis and data-driven prediction of churning losses in multi-shaft transmission systems
    ZHANG, W. - Tsinghua University
  • T06-S06.3
    17:20 - 17:40Oral presentation
    4DXM - Predicting the Evolution of Fretting Wear in Spline Couplings Under Representative Conditions
    GICHUKI, A. - University of Nottingham
OCEANIA-VIII
16:40 - 18:00
Surface Metrology and Contact Mechanics - Session 06
16:40 - 18:00
  • T03-S06.1
    16:40 - 17:00Oral presentation
    4ENY - Effect of non-stationary frictional heating on contact of viscoelastic coatings
    TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
  • T03-S06.2
    17:00 - 17:20Oral presentation
    4ENZ - Mechanics-Driven Design of Patterned Steel Floor Plates for Enhanced Slip Resistance and Fatigue Durability
    QIAN, L. - Imperial College London
  • T03-S06.3
    17:20 - 17:40Oral presentation
    4ESY - In-situ measurement of ultra-thin lubricant films under extreme loads in large water-lubricated graphite bearings
    DOU, P. - Imperial College London, Xi'An Jiaotong University
  • 17:40 - 18:00Oral presentation
    4F2H - Surface Tension Effect in Nano-Indentation of Soft Materials
    NOEL, - Université du Maine le Mans Laval
OCEANIA I
16:40 - 18:00
Tribomechadynamics, Tribotests and Monitoring - Session 06
16:40 - 18:00
  • T12-S06.1
    16:40 - 17:00Oral presentation
    4DNT - The Spark and the Slide: Investigating Coupled Tribo-Electrical Phenomena in EV Drivetrains
    Damien Yiyuan Khoo - Bruker
  • T12-S06.2
    17:00 - 17:20Oral presentation
    4DYK - Triboelectroscopy: A New Tool for Real-Time Friction–Current Correlation
    SANTOS, M. B. D. - Universidade Federal de Uberlândia
  • T12-S06.3
    17:20 - 17:40Oral presentation
    4EQD - Experimental Characterization of Adhesion and Electroadhesion in Soft Contacts with Simultaneous Contact Area Measurement
    PORTALURI, L. - University of Salento
  • T12-S06.4
    17:40 - 18:00Oral presentation
    4F2S - A Transient Electromagnetic Field Model for Non-Ferromagnetic Particles with Motion Effects: Mechanism Analysis and Experimental Validation
    ZHAO, Bin - Harbin Engineering University
OCEANIA IX
16:40 - 18:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 06
16:40 - 18:00
  • T05-S06.1
    16:40 - 17:00Oral presentation
    4EAK - Lubrication at the Electrified Surfaces: Atomistic Insights
    ZHU, Z. - Imperial College London
  • T05-S06.2
    17:00 - 17:20Oral presentation
    4EAM - Lubricant behaviours in electrified tribology
    ZHAO, Y. - Imperial College London
  • T05-S06.4
    17:40 - 18:00Oral presentation
    4F4A - Tunable tribology properties of shape memory polymer
    YANG, Z. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
16:4018:20
OCEANIA II
16:40 - 18:20
Sustainable Tribology - Green Tribology and Energy Transition - Session 06
16:40 - 18:20
  • T02-S06.1
    16:40 - 17:00Oral presentation
    4DVM - A modified bio-oil from Schizochytrium sp. microalgae as a lubricity improver
    Alejandro García Tuero - Universidad de Oviedo
  • T02-S06.2
    17:00 - 17:20Oral presentation
    4DW4 - Designing safe and sustainable lubricant additives with reactive molecular dynamics
    EDER, S. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH
  • T02-S06.3
    17:20 - 17:40Oral presentation
    4DWJ - Tribological Properties of Melamine Long-Chain Alcohol Ester Derivatives as Friction Modifiers at High Temperatures
    Wenjing Hu - Shanghai Advanced Research Institute, Chinese Academy of Sciences
  • T02-S06.4
    17:40 - 18:00Oral presentation
    4DRC - Investigating the Surface Fatigue Behaviour of Water-Based Lubricants in Applications Pertinent to EV Drive Units
    Haochen Yao - Imperial College
  • 18:00 - 18:20Oral presentation
    4DWK - Sustainable Energy Transition for Sustainable Tribology: An Assessment using Machine Learning
    T V V L N Rao - MIT Art, Design and Technology University
18:0019:30
EUROPA III-IV
18:00 - 19:30
18:00 - 19:30
  • RT - Round table International Cooperation
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
  • P04.14DMM - Tribology and Energy Transition: a Brazilian Perspective
    Henara Lillian Costa - Universidade Federal do Rio Grande
09:3010:30
OCEANIA I
09:30 - 10:30
Tribomechadynamics, Tribotests and Monitoring - Session 07
09:30 - 10:30
  • T12-S07.1
    09:30 - 09:55Invited Speaker
    4FCB - Real-world tribology testing is all about the art of deception
    LEE, P. - Southwest Research Institute
  • T12-S07.2
    09:55 - 10:15Oral presentation
    4DX4 - Fretting Wear Analysis and Optimization Design of Rope Sheave Lifting Mechanism
    YAOSHIJIE, - Harbin Engineering University
  • T12-S07.3
    10:15 - 10:35Oral presentation
    4EJE - Complete Stribeck Curve Prediction by Applying Machine Learning to Acoustic Emission Data from a Lubricated Sliding Contact
    YANG, S. - Imperial College London
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 07
09:30 - 10:50
  • T06-S07.1
    09:30 - 09:50Oral presentation
    4DZT - Airborne wear particle emissions from a light aircraft brake
    NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
  • T06-S07.2
    09:50 - 10:10Oral presentation
    4E2V - Manufacturing of hybrid bearing washers using a novel carbide containing alloy
    FAQIRI, Y. - Universität Hannover
  • T06-S07.3
    10:10 - 10:30Oral presentation
    4E42 - Performance Evaluation of transfer learning for surface damage identification in tribological systems
    MOHAMMAD-POUR, Mahdi - TriboDENS ltd
  • T06-S07.4
    10:30 - 10:50Oral presentation
    4E4B - Experimental and Numerical Investigation of Biodegradable Hydraulic Lubricant Performance in Axial Piston Pumps
    MARTINS FERREIRA, P. - TotalEnergies
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 07
09:30 - 10:50
  • T03-S07.2
    10:10 - 10:30Oral presentation
    4EXK - Effect of Surface Roughness on Scuffing Damage in Rolling-Sliding Contacts
    FAZZIO, O. - Imperial College London
  • T03-S07.3
    10:30 - 10:50Oral presentation
    4F6E - Partial Slip in Tangential Contact of an Elastic Quarter-Space
    LI, Q. - Technische Universität Berlin
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 07
09:30 - 10:50
  • T02-S07.1
    09:30 - 09:50Oral presentation
    4DXD - Numerical investigation of the effects of abrasive particles in lubricating oil on the performance of hydrodynamic journal bearings used in aircraft engine power transmission systems
    BOUAJILA, H. - Université de Poitiers
  • T02-S07.2
    09:50 - 10:10Oral presentation
    4DYE - Bubble-assisted electrochemical MXenes as novel sustainable solid lubricant.
    BILOTTO, P. - Technische Universität Wien
  • T02-S07.3
    10:10 - 10:30Oral presentation
    4DYH - A Boundary Element formulation for polymer bearings steady-state response
    SANTERAMO, M. - Politecnico di Bari
  • T02-S07.4
    10:30 - 10:50Oral presentation
    4DYP - Graphene oxide as an additive in aqueous lubricants containing glycol and glycerol
    NAJJARI, R. - Loughbrough university
OCEANIA III
09:30 - 10:50
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 07
09:30 - 10:50
  • T13-S07.1
    09:40 - 10:05Invited Speaker
    4FBA - High-Throughput Testing & Machine Learning Based Discovery of Novel Alloys
    DELRIO, F.W. - Sandia National Laboratories
  • T13-S07.2
    10:10 - 10:30Oral presentation
    4EQ6 - Semantically Grounded AI for Tribological Creativity on Demand
    GARABEDIAN, N. - datin GmbH
  • T13-S07.3
    10:30 - 10:50Oral presentation
    4ERF - Machine Learning-Based Prediction of Tribological Behavior in In-Situ Reinforced NbC-Fe Metal Matrix Composites
    SOUZA, E. M. - Universidade Federal de Santa Catarina
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 07
09:30 - 10:50
  • T05-S07.1
    09:40 - 10:10Keynote Speaker
    4FDD - Keynote talk - Koshi Adachi
    ADACHI, K. - Tohoku University
  • T05-S07.2
    10:10 - 10:30Oral presentation
    4EET - Effect of simultaneous use of corrosion inhibitor and anti wear additive on the resulting wear and corrosion protection
    REIMERS, M. - MSE - RWTH Aachen University
  • T05-S07.3
    10:30 - 10:50Oral presentation
    4EFP - Micro-particles: toward a revolution in tribology
    ZUBIETA-LABORDE, P.m - Centrale Lyon
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 07
09:30 - 10:50
  • T10 - S07.1
    09:40 - 10:10Keynote Speaker
    4FAS - Multifield Contact-Lubrication Theories, Applications, and Modeling Approaches
    WANG, Q. J. - Northwestern University
  • T10 - S07.2
    10:10 - 10:30Oral presentation
    4E6E - How sliding creates universal self-affine fractal surfaces
    XU, R. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T10 - S07.3
    10:30 - 10:50Oral presentation
    4EN4 - Homogenized Response of a Periodically Heterogeneous Elastic Half-Space
    LI, Z. - Sorbonne University
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 07
09:30 - 10:50
  • T04-S07.1
    09:40 - 10:10Keynote Speaker
    4DTB - Self-lubrication vs. plasticity: MD perspectives on ice and rock friction
    Martin H. Müser - Universität des Saarlandes
  • T04-S07.2
    10:10 - 10:30Oral presentation
    4EDJ - Vacuum Thermal Treatment for Achieving Superlubricity by Nanodiamond and Hexagonal Boron Nitride on H-DLC Film Surfaces in Dry Nitrogen
    HUANGPENG, - Guizhou University (Institute of Technology), Tsinghua University
  • T04-S07.3
    10:30 - 10:50Oral presentation
    4EDW - Disordered Water Molecule Structure Enhances Interfacial Slip
    PAN, T. - Tsinghua University
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 07
09:30 - 10:50
  • T01-S07.1
    09:30 - 09:50Oral presentation
    4E44 - Effect of laser shock peening on tribological performance of 15CrNiMo carburized layer in multi-body friction systems
    WANG, Y. - Southwest Petroleum University
  • T01-S07.2
    09:50 - 10:10Oral presentation
    4EBB - Phosphate coatings for protection of steels surfaces
    CROCKETT, R. - Swiss Federal Laboratories for Materials Science and Technology
  • T01-S07.3
    10:10 - 10:30Oral presentation
    4EBV - Thermal isolation effect of DLC coatings on steel substrates
    KALIN, M. - University of Ljubljana
  • T01-S07.4
    10:30 - 10:50Oral presentation
    4DPW - A bioinspired approach using hierarchically structured DLC multilayer coatings for tribological applications
    Markus Polzer - Friedrich-Alexander-Universität Erlangen-Nürnberg
09:4010:50
OCEANIA IV
09:40 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 07
09:40 - 10:50
  • T07-S07.1
    09:45 - 10:10Invited Speaker
    4DTE - Simple Methods for Predicting Mixed and Boundary Friction
    Ian Sherrington - University of Lancashire
  • T07-S07.2
    10:10 - 10:30Oral presentation
    4DZR - Multiscale Modelling of Rain Droplet Impact on Wind Turbine Blades
    NAMBIAR, V. R. - Ghent University / Universiteit Gent
  • T07-S07.3
    10:30 - 10:50Oral presentation
    4E2K - The formation mechanism, diffusion behavior, properties of the material transfer layer on the rail surface during ultra-high speed sliding electrical contact
    CHEN, Deshan - Central South University (Zhongnan University)
OCEANIA V
09:40 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 07
09:40 - 10:50
  • T08-S07.1
    09:45 - 10:10Invited Speaker
    4DQT - Lubrication in Charged Hydrogels: Hydration Lubrication vs. Electrostatics
    Rosa M Espinosa-Marzal - University of Illinois Urbana Champaign
  • T08-S07.2
    10:10 - 10:30Oral presentation
    4E2Y - A Novel Biomimetic Strategy for Improving Lubrication Performances of UHMWPE Inspired by the Slippery gel Release Behavior of Chia Seeds
    DONG, C. - Wuhan University of Technology
  • T08-S07.3
    10:30 - 10:50Oral presentation
    4EAH - Friction and Wear Behavior of Sustainable Microfibrillated Cellulose/Polylactic Acid Hybrid Coatings with Antiviral Activity
    REN, K. - University of Birmingham
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 03
Poster Session 03
10:50 - 11:30
  • 03.14EXH - Analysis of wear modes in gaseous hydrogen network valves
    SOUZA FILHO, A. N. - Universidade de São Paulo
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.24F64 - Impact of Fretting on Electrical Steel Performance in Electrical Machines
    VITTORINO, A. A. O. F. - Universidade Federal de Uberlândia
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.34FAK - Tribological Behaviour of Thermally Sprayed Bronze / Rice Husk AshComposite Coatings
    OLIVEIRA, A. C. - Universidade Federal do Rio Grande
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.44EZP - Use of a triboacoustic pin to monitor the formation of tribofilms in ethanol contaminated lubricants
    PIOVESAN, A. S. - Universidade Federal de Pelotas
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.54EYD - Advanced Tribological Testing Machines at TEKNIKER
    IGARTUA, A. - Fundación Tekniker
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.64EK4 - Wear and Fatigue Behavior of AM Stainless Steels Exposed to Hydrogen
    PODGORNIK, B. - Institute of Metals and Technology
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.74FA2 - Influence of seed origin on Moringa oleifera oil properties
    ZAPPELINO CAMILLO, B. - Centro Universitário SENAI SC
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.84EEF - From Tribological Loss Reduction to System-Level Energy Efficiency: Implications for Industrial Cogeneration Systems
    SILVA, C. A. F. D. - Pontifícia Universidade Católica de Minas Gerais, Universidade Federal de Minas Gerais
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.94EVE - Effect of Reduced Graphene Oxide nanoparticles on performance of Gearbox Lubrication Systems
    SILVA, D. F. F. D. - Universidade Federal do Rio Grande do Norte
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.104DSC - Performance of SiC/YAG Coatings in Steam-Rich and Ash Environments
    Franciele Dias de Castro - Universidade Federal de Pelotas
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.114EGB - Green tribology promoting social, racial and gender equality in the STEMs
    MOREIRA, H. T. S. - Universidade Federal do Rio Grande
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.124EPG - Aqueous superlubricity of a SiC-coated stainless steel sliding against Si3N4
    SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.134EA6 - Electro-tribological and electrical properties of PAO based lubricants with ZDDP and CNT additives
    FARFAN-CABRERA, L. I. - Tecnológico de Monterrey
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.144ETK - TriboGirls Project: Biofuels for a Sustainable World
    GABRIEL, L. R. - Universidade Federal do Rio Grande do Norte
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.154DVH - Tribological Insight into Aggregate Selection for Pavement Skid Resistance Using the Aggregate Hardness Parameter
    KANE, M. - Gustave Eiffel University
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.164ECZ - Thermophysical and Tribological Properties of Sustainable Lubricant Formulations Based on Synthetic Bases and Recycled Vegetable Oils
    GUIMAREY, M. J. G. - Universidade de Santiago de Compostela
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.174FAM - Divergencies in bio-lubrication: academic outputs versus IP abandonment ratios
    HROMATKA, M. - Universidade Federal de Santa Catarina
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.184EFN - Sustainable superlubricity: a festival powered by nature
    ZUBIETA-LABORDE, P.m - Centrale Lyon
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.194FDN - Unraveling Fretting Wear Mechanisms of AISI 52100 Steel in Electrified Vehicle Tribosystems
    YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.204E22 - Tribological Characterization of a Water-Based Lubricated Ball Bearing under an Electric Field
    , S. W. - Loughborough University
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.214FAD - Reciprocating sliding wear of carbon fiber reinforced PEEK
    FERREIRA, P. M - Universidade Federal do Espírito Santo
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.224FBW - FR202 – A new proprietary renewable Organic Friction Reducer
    VERGA, S. - Eni S.p.A.
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.234F2G - Design and Application of a Novel Tribo-Electrochemical Cell for In-Situ Hydrogenation Studies
    KHOSLA, T. - Rtec Instruments Inc.
    Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
  • 03.244EGX - Innovative Green Ingredients for Sustainable Automotive Brake Friction Materials
    NOGUEIRA, A. P. G. - Brembo NV
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.254EZT - Experimental and Numerical Analysis of the Influence of Surface Morphology on the Tribological Behavior and Contact Mechanics of Polyurethane Rail Pads
    VICENTE, A. D. F. N. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.264DYB - Laser Cladding Effects on Abrasive Wear Resistance of Hardox 400 Steel
    ULBRICH, D. - Poznan University of Technology
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.274EN2 - Grinding Performance of a Structured Wheel with Internal Cooling Channels
    COSTA, S. M. - Associate Laboratory, Center for MicroElectromechanical Systems, Mountain Research Center
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.284EBP - Assessment of abrasive wear resistance of RAVUR250HR, SAE1045, and HSLA501 steels
    MURARI, F. D. - USIMINAS
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.294FAV - Influence of Surface Pre-Treatment on Wear Resistance of Patinas Formed on Weathering Steel under Atmospheric Exposure
    LUZ, F. K. C. - Universidade Federal do Rio Grande
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.304EMK - Tribological Interaction in W–Cu Sintered Composites: Role of Cu Nanoflakes in W Particle Adhesion and Resistance to Particle Detachment
    BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.314EDF - Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions
    BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.324EEC - Effect of Deformation-Induced Changes in Elasto-Plastic Properties on Galling Resistance of AISI 304 Stainless Steel
    PRIETO, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.334ESQ - Investigating Bearing Surface Damage via Coupled Electro-Thermal Analysis
    ESHRAGHI, H. - Flanders Make, Ghent University / Universiteit Gent
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.344EVP - Blickensderfer’s methodology in a field wear test to evaluate wear-resistant materials for transfer chute linings
    PENAGOS, J. J. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.354E6R - Surface Integrity in Micromilling of NiTinol for Medical Applications
    LOPES, J. D. S. - Universidade Federal de Uberlândia
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.364EFZ - Comparative Study of the Mechanical and Tribological Properties of Recycled and Conventional Filaments in 3D Printing
    SOUZA, J. R. D. - Universidade Federal Rural do Semi
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.374EYX - A CFD–DEM simulation study of abrasive wear in iron ores slurry controlvalves
    LIMA, L. F. B. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.384EH2 - Hardness and alumina content determine the Low-Stress Sliding Abrasion wear in commercial ceramics for transfer chute linings?
    DIAS-BATISTA, L. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.394FAZ - Impact of grinding stone topography on rail surface integrity
    BIAZON, L. - University of Sheffield
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.404EXD - Experimental approaches to system-level identification of tribological parameters in automotive friction torsional vibration dampers
    FORMELA, M. T. - Eaton Mobility Group, Gdansk University of Technology / Politechnika Gdanska
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.414EKJ - Comparison of Abrasive Wear in Conveyor Belt Splices Using Two Experimental Methods
    ZINATO, N. L. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.424DZQ - Sand-Slurry Erosion of Corrosion-Resistant Alloys at a Shallow Impact Angle
    DANTAS, N. V. - Universidade Federal do Espírito Santo
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.434EQS - Sclerometry as a method to evaluate the grindability of HSS applied for tap tools
    STREY, N. F. - Universidade Federal do Espírito Santo
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.444FAR - Tool Wear Mechanisms when turning Ti-6Al-4V alloy
    KWON, P. - San Diego State University
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.454EPC - Tribological Characterization of Bi-Functional Abrasive Composite
    CAPELA, P. A. - University of Minho
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.464E4K - Abrasiveness and Geology of Brazilian Iron Ores: Considerations Based on the Miller Abrasiveness Test
    BARBOSA, P. R. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.474DZX - Abrasive and erosive wear caused by iron ore slurries with varied silica content on high chromium cast iron: influence of iron ore geology
    BARBOSA, P. R. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.484EVW - Abrasive wear of conveyor belt rubber materials used in an iron ore processing plant
    SANTOS, Y. L. D. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 03.494FBV - A preliminary research of laser DED repairing and its mechanical properties aiming remanufacturing
    TEI, Y. - Japan Advanced Institute of Science & Technology
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 08
11:30 - 12:30
  • T06-S08.1
    11:30 - 11:50Oral presentation
    4E4G - Tribo-rheological and thermal characterization of vegetable oil in water microemulsions as a potential water-based fluid for metalworking applications
    J. A. FRIAS-FLORES - Instituto Politécnico Nacional
  • T06-S08.2
    11:50 - 12:10Oral presentation
    4E4J - Tribomechanical Evaluation of FeCrNiMo Alloy Reinforced with WC Deposited by L-DED
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • T06-S08.3
    12:10 - 12:30Oral presentation
    4E4Q - Atomic material removal mechanism in ultra-precision chemical mechanical polishing of bearings and gears
    JIANG, L. - Southwest Jiaotong University, Yanghua Zhizao (Sichuan) Innovation Technologies Co., Ltd.
OCEANIA-VIII
11:30 - 12:30
Surface Metrology and Contact Mechanics - Session 08
11:30 - 12:30
  • T03-S08.1
    11:30 - 11:50Oral presentation
    4EXR - A Probabilistic Metrological Framework Linking Surface Topography Transition to Functional Tribological Performance
    GRABON, W. A. - Rzeszow University of Technology
  • T03-S08.2
    11:50 - 12:10Oral presentation
    4EYF - Rare-earth-based luminescent sensors for tribological applications
    DESCARTES, S. - Institut national des Science Appliquées de Lyon
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 08
11:30 - 12:30
  • T12-S08.1
    11:40 - 12:10Keynote Speaker
    4EHR - Fretting wear prediction in aero-engine blades
    BOTTO, D. - Politecnico di Torino
  • T12-S08.2
    12:10 - 12:30Oral presentation
    4EGH - The effect of fretting wear on the forced response of structures with contact interfaces: experimental versus numerical results
    ZUCCA, S. - Politecnico di Torino
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 08
11:30 - 12:30
  • T02-S08.1
    11:30 - 11:50Oral presentation
    4DYW - Ammonia Production via Mechanocatalysis: A Molecular Dynamics Study
    RAHMAN, M. A. - Imperial College London
  • T02-S08.2
    11:50 - 12:10Oral presentation
    4DZC - Suistainable lubricating greases using biodegradable thickeners
    ROSS, J. D. - Imperial College London
  • T02-S08.3
    12:10 - 12:30Oral presentation
    4DZN - Improvement of Efficiency performance of transaxle fluids for electric vehicles
    CAWICH, P. - Idemitsu Lubricants America Corp.
OCEANIA III
11:30 - 12:30
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 08
11:30 - 12:30
  • T13-S08.1
    11:30 - 11:50Oral presentation
    4ESB - Artificial Intelligence for Image-Based Monitoring and Prediction of Cutting Tool Coating Wear
    DIENWIEBEL, M. - Microtribology Centre
  • T13-S08.3
    12:10 - 12:30Oral presentation
    4EYZ - Advancing solid interfaces and Lubricants by High Throughput and Machine Learning Calculations
    RIGHI, M. C. - Università di Bologna
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 08
11:30 - 12:30
  • T07-S08.1
    11:30 - 11:50Oral presentation
    4E4T - Preparation and Evaluation of Protective Coatings for Aeroengine Blade Tips
    DUAN, D. - Institute of Metal Research, Chinese Academy of Sciences
  • T07-S08.2
    11:50 - 12:10Oral presentation
    4E6Y - Morphology-Regulated MoS2/MWCNTs Hybrids for Enhanced Tribological and Mechanical Performance of PEEK Composites under Harsh Environments
    HUANG, S. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
  • T07-S08.3
    12:10 - 12:30Oral presentation
    4EAC - Erosion performance of AlSi-based abradable coating
    ARENDARCHUCK, B. E. - Concordia University Montreal
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 08
11:30 - 12:30
  • T05-S08.1
    11:30 - 11:50Oral presentation
    4EGA - Mo(VI) dithiocarbamate friction behavior in steel-steel contact under boundary lubrication
    MINFRAY, C. - LTDS CNRS Ecole centrale de Lyon
  • T05-S08.2
    11:50 - 12:10Oral presentation
    4EGT - Effects of Methanol as an Alternative Fuel on Lubricated Interfaces in Maritime Transport
    Xinhe Xiong - University of Leeds
  • T05-S08.3
    12:10 - 12:30Oral presentation
    4EGV - Stress-Dependent Tribofilm Formation of ZDP under Full-Film EHD Conditions: Comparison with ZDDP
    WANG, C. C. - Imperial College London
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 08
11:30 - 12:30
  • T08-S08.1
    11:30 - 11:50Oral presentation
    4EMC - Exotic Tribology of Soft Interfaces – Chocolates to Contact Lenses
    PONDICHERRY, K. - Anton Paar GmbH
  • T08-S08.2
    11:50 - 12:10Oral presentation
    4EAT - Needle Insertion Induced Fracture and Friction in Biomimetic Soft Gels
    MUTHUKUMAR MARIAPPAN - Acharya Institute of Technology
  • T08-S08.3
    12:10 - 12:30Oral presentation
    4EAW - Ti‑6Al‑4V/HAp/MXene surface architectures for low‑friction, osteointegrative biomaterials
    TOMALA, A. M. - Cracow University of Technology
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 08
11:30 - 12:30
  • T10 - S08.1
    11:30 - 11:50Oral presentation
    4EBW - Decoding Phosphate Tribofilm Behavior via Multiscale Characterization for Improved EV Performance
    ARNOUX, Q. - TotalEnergies
  • T10 - S08.2
    11:50 - 12:10Oral presentation
    4ECM - On Modeling Welding Polymer Process: A Molecular Dynamics Approach
    DIOP, M. B. - Université de Strasbourg
  • T10 - S08.3
    12:10 - 12:30Oral presentation
    4DSY - Truncation effects in the roller-end on flange contact
    Patrigeon Tristan - Laboratoire de Mécanique des Contacts et des Structures
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 08
11:30 - 12:30
  • T04-S08.1
    11:30 - 11:50Oral presentation
    4EEP - EHD model with lubricant slip on slower and faster surface
    POLAJNAR, M. - University of Ljubljana
  • T04-S08.2
    11:50 - 12:10Oral presentation
    4EFS - FrictionSim2D: A High-Throughput Molecular Simulation Framework to Screen the Friction Performance of Two-Dimensional Materials
    VALDERRAMA, M. - Imperial College London
  • T04-S08.3
    12:10 - 12:30Oral presentation
    4EFV - Atomic-scale mechanisms behind macroscopic superlubricity in plain bearings: the case of glycerol-lubricated ta-C and Si3N4
    REICHENBACH, T. - Fraunhofer Institute for Mechanics of Materials
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 08
11:30 - 12:30
  • T01-S08.1
    11:30 - 11:50Oral presentation
    4ECC - Slurry erosive wear of DLC (a-C) coated alloys for oil and gas applications
    OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
  • T01-S08.2
    11:50 - 12:10Oral presentation
    4ECE - Study on high temperature tribological properties of self lubricating coatings
    CHENG, B. - Tsinghua University
  • T01-S08.3
    12:10 - 12:30Oral presentation
    4ECJ - Insights into the tribological and micro-impact behaviour of multilayer coatings based on TiN, CrN, ZrN, TiCrN and TiZrN
    TOBOŁA, D. - Łukasiewicz Research Network – Krakow Institute of Technology
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
  • PJA03.14FCN - The mechanics of contact between rough surfaces
    PASTEWKA, L. - Universität Freiburg
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 09
14:40 - 16:00
  • T06-S09.1
    14:40 - 15:00Oral presentation
    4E62 - Effect of heat treatment on the tribocorrosion behavior of 20Cr13 martensitic stainless steel
    JIANG, S.L. - Institute of Metal Research, Chinese Academy of Sceinecs
  • T06-S09.2
    15:00 - 15:20Oral presentation
    4E64 - Tribocorrosive wear behavior of grinding media in Miller Test
    GUIMARÃES, M.L.S.S. - Universidade Federal de Ouro Preto
  • T06-S09.3
    15:20 - 15:40Oral presentation
    4E6G - Analyses of the coupling between thermomechanical and tribological processes during a railway braking test
    CRISTOL, A.-L. - Centrale Lille
  • T06-S09.4
    15:40 - 16:00Oral presentation
    4E6N - Investigation of the Influence of Stress Relaxation Behavior on Radial Stress in Nonwoven Fabric Winding Processes.
    NISHIOKA, S. - Tokai University
OCEANIA-VIII
14:40 - 16:00
Tribo-Induced Surface and Sub-Surface Transformations - Session 01
14:40 - 16:00
  • 14:40 - 15:10Keynote Speaker
    4EAF - The fascinating interplay between crystallography and subsurface microstructure evolution
    GUMBSCH, P. - Karlsruhe Institute of Technology
  • T09-S01.1
    15:10 - 15:30Oral presentation
    4DM6 - Thermal Damage on Rolling/Sliding Contact Surfaces as Produced byEmbedded Particles
    Guillermo E. Morales-Espejel - SKF Research and Technology Development
  • T09-S01.2
    15:30 - 15:50Oral presentation
    4DMY - Tribological Behaviour of PEEK Composites Reinforced with Alumina Particles: Influence of Particle Size and Content
    Karl Delbé - Université de Technologie de Tarbes
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 09
14:40 - 16:00
  • T12-S09.1
    14:50 - 15:20Invited Speaker
    4ENX - COMBINED STRATEGIES FOR THE COMPUTATIONALLY TRACTABLE MATCHING OF TURBINE BLADES WITH DRY-FRICTION UNDERPLATFORM DAMPERS
    GOLA, Muzio - Politecnico di Torino
  • T12-S09.2
    15:20 - 15:40Oral presentation
    4EEV - Interface dynamic evolution of solids under dry frictional contact and correlation with macroscopic tribological response
    CATTAI, M. - Università degli Studi di Roma La Sapienza
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 09
14:40 - 16:00
  • T02-S09.1
    14:40 - 15:00Oral presentation
    4E2T - Aqueous Lubrication for EV Powertrains: A Multi-Scale Investigation of Tribofilm Formation Under Electrified Conditions
    PUHAN, D. - University of Sheffield
  • T02-S09.3
    15:20 - 15:40Oral presentation
    4EE2 - Lubricant Inerting - Enhancing Sustainability of Lubrication Systems
    WONG, J. S. - Imperial College London
  • T02-S09.4
    15:40 - 16:00Oral presentation
    4EBJ - Thermo-oxidative aging effects on the electrical and electro-tribological performance of e-fluids
    Soto-Nieto, F - Tecnológico de Monterrey
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 09
14:40 - 16:00
  • T07-S09.1
    14:40 - 15:00Oral presentation
    4EAD - Exploring boron nitride nanotubes as reinforcement to Co-TiC sintered composites at high-tempreature wear against Si3N4 ball counterpart
    Tisov, O. - Xi'An Jiaotong University
  • T07-S09.2
    15:00 - 15:20Oral presentation
    4EB2 - Reducing the humidity dependence of friction and wear of graphite-based solid lubricant coatings
    DIENWIEBEL, M. - Microtribology Centre
  • T07-S09.3
    15:20 - 15:40Oral presentation
    4EDG - Exploration of Adaptive Tribological Surfaces for Aerospace Applications with In-situ Raman Analysis
    VOEVODIN, A. A. - University of North Texas
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 09
14:40 - 16:00
  • T05-S09.1
    14:40 - 15:00Oral presentation
    4EGZ - Optical Observation of Boundary-Activated MoS2 Tribofilm for the Sustainability of Liquid Superlubricity of PEG
    DANĚK, L. - Brno University of Technology
  • T05-S09.2
    15:00 - 15:20Oral presentation
    4E4V - Macro-Superlubricity on Steel under High Sliding and Contact Pressure
    LI, H. - Shanghai Advanced Research Institute, Chinese Academy of Sciences
  • T05-S09.3
    15:20 - 15:40Oral presentation
    4EJC - Effect of Graphene Reinforcement on the Tribological Behavior and Mechanical Properties of Si₃N₄ Nanocomposites
    DE BARROS BOUCHET, M. I. - Centrale Lyon
  • T05-S09.4
    15:40 - 16:00Oral presentation
    4EJS - Experimental strategy to study the effect of environment on MoDTC friction reduction capabilities
    MINFRAY, C. - LTDS CNRS Ecole centrale de Lyon
OCEANIA V
14:40 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 09
14:40 - 16:00
  • T08-S09.1
    14:40 - 15:00Oral presentation
    4EAX - Tribocorrosion Behaviour of Additively Manufactured Ti6Al4V with Targeted Surface Structures under Synovial Fluid Degradation
    ODEHNAL, L. - Brno University of Technology
  • T08-S09.2
    15:00 - 15:20Oral presentation
    4EBN - Response of PVA Hydrogels in the Boundary Lubrication Regime after Loss of Fluid Pressurization
    NEMECEK, D. - Brno University of Technology
  • T08-S09.3
    15:20 - 15:40Oral presentation
    4ECG - Modified pHEMA hydrogels as cartilage biomimetic materials
    REBENDA, D. - Brno University of Technology
  • T08-S09.4
    15:40 - 16:00Oral presentation
    4ECK - Ensuring Adhesion to a Wet Interface: the case of a Mushroom Shaped Microstructure
    NASCA, L. - Politecnico di Bari
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 09
14:40 - 16:00
  • T10 - S09.1
    14:40 - 15:00Oral presentation
    4E6H - Constructing the continuum-physics core of a digital twin for tribological contacts under boundary and mixed lubrication conditions
    MOSELER, M. - Fraunhofer Institute for Mechanics of Materials
  • T10 - S09.2
    15:00 - 15:20Oral presentation
    4E6Z - Very high cycle fatigue of high strength steels applied to aeronautic rolling bearings
    BEHLAL, H. - Institut national des Science Appliquées de Lyon
  • T10 - S09.3
    15:20 - 15:40Oral presentation
    4EAQ - Maintaining Joint Lubrication: A FSI Coupled Model of Cartilage Mechanics
    ASHIK, A. K. - Imperial College London
  • T10 - S09.4
    15:40 - 16:00Oral presentation
    4EBH - Semi-analytical modeling of sprag clutches quasi-static behavior
    DUMET, T. - Laboratoire de Mécanique des Contacts et des Structures
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 09
14:40 - 16:00
  • T04-S09.1
    14:55 - 15:20Invited Speaker
    4EPY - Strain‑Mediated Topography–Chemistry Coupling in Atomic‑Scale Friction: Insights from Graphene Step Edges
    KIM, S. H. - Pennsylvania State University
  • T04-S09.2
    15:20 - 15:40Oral presentation
    4EHX - Competing Cavitation and Chain Scission Drive Delayed Fracture in Viscoelastic Solids
    PENG, Y. - Nanjing University of Science & Technology
  • T04-S09.3
    15:40 - 16:00Oral presentation
    4EJA - Concentration-Driven Conformational Transitions in Adsorbed Polymer Films Govern Tribological Behavior
    SONG, Y. - Nagoya University
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 09
14:40 - 16:00
  • T01-S09.1
    14:40 - 15:00Oral presentation
    4DZE - Influence of the Steel Disk Topography on the Friction Behavior of Wet Brakes and Clutches
    STROBL, P. - Technical University of Munich, Gear Research Center
  • T01-S09.2
    15:00 - 15:20Oral presentation
    4ECW - Influence of Surface Slip on Hydrofoil Drag and Flow Noise Characteristics
    ZHU, M. - Tsinghua University
  • T01-S09.3
    15:20 - 15:40Oral presentation
    4ED6 - Boride-based solid lubricants for extreme environments
    PÖLZLBERGER, D. - TU Wien
  • T01-S09.4
    15:40 - 16:00Oral presentation
    4EDT - High-Performance Flexible Electronics Fabricated Using a Surface Energy-Directed Assembly Process on Ultrathin Polyimide Substrates
    LI, Z. - Tsinghua University
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:0016:40
America
16:00 - 16:40
Session
Poster Session 04
Poster Session 04
16:00 - 16:40
  • 04.14DQK - Component-level wear and friction investigation of polymer packing seals exposed to Lunar and Martian regolith simulants
    Ádám Kalácska - Ghent University / Universiteit Gent
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.24EBQ - Solid Particle Erosion of Plasma-nitrided DLC-coated Superduplex 2507 Stainless Steel and Inconel 718
    BRAGANÇA, B. C. - Universidade Federal do Espírito Santo
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.34FBB - Tribological Properties and Space Environment Effects of Metal dichalcogenide Lubricating Films
    WANG, D. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.44EPD - Scratch Adhesion Resistance of DLC Coatings on 2507 Superduplex Stainless Steel and Inconel 718 by PVD and PECVD
    SOUSA, F. G. M. - Universidade Federal do Espírito Santo
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.54E6K - Design of an Experimental Setup for Quantifying High-Velocity Droplet Impact Forces
    POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.64DNB - Time accumulation effect on multiscale contact transient modeling to piston pump with in mixed lubrication
    Jian FU - Beihang University (Beijing University of Aeronautics and Astronautics)
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.74EAV - Evolution of Friction and Wear Mechanisms of Aerospace sealing Rubber under Thermal–Oxidative Aging
    WU, J. - Harbin Institute of Technology, Harbin Institute of Technology at Weihai
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.84ESW - Engineered Surfaces and Functional Additives for Extreme-Condition and Sustainable Tribological Applications: A Review
    KATIYAR, J. K. - Manipal Institute of Technology, Manipal
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.94EAB - Abrasive Wear of High Density Polyethylene for Offshore Applications
    Sales de Oliveira, K. - University of Brasilia
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.104EMW - Design of Novel Grease-Based Ultralow Friction and Wear Systems and Their Study in Space Lubrication
    Zhang. L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.114EYB - Friction and Wear Performance of SAE 1070 Steel in Air and Seawater for Flexible Riser Applications
    VIEIRA, L. - Instituto Tecnológico de Aeronáutica
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.124DXR - Biomimetic “soft-hard-soft” gradient interface engineering: multi-stage structural synergies and dual-layer tribofilm modulation for enhanced tribological properties of CF/PTFE composites
    YANG M - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.134E2B - Lubrication materials for advanced nuclear reactors
    WANG, P. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.144DXZ - Vat photopolymerization 3D printable self-lubricating polyimide
    WANG, X. - Lanzhou Institute of Chemical Physics
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.154ENB - Regulation of High-Temperature Adhesion and Static Friction Behaviors of Superalloys via Surface Topography Control
    ZOU, Yuhui - Tsinghua University
    Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
  • 04.164ES6 - Continuous Measurement of Cage Wear in Cylindrical Roller Bearings
    SUZUKI, D. - Railway Technical Research Institute
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.174DXE - Micro-abrasive Wear in PTFE and PTFE Composites for Ball Valve Seats
    TELES, D. B. - Universidade de Caxias do Sul
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.184F4H - Ball cratering evaluation of epoxy and ECTFE coatings on carbon steel under abrasive conditions
    TELES, D. B. - Universidade de Caxias do Sul
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.194DYF - Correlating Vibration Analysis to the Development of Gear Pitting
    MAELE, D. V. - Flanders Make, Ghent University / Universiteit Gent
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.204ERN - Tribological Monitoring Using an LR Sensor Applied to the Detection of Metallic Particles in Pure Mineral Oil
    BEZERRA, E. M. - Universidade Estadual Paulista
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.214ESZ - The Method of Implementation of the Optical Fiber Sensor in Selected Sliding Contacts
    ORLICKI, G. - Gdansk University of Technology / Politechnika Gdanska
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.224DYN - Exploring the relationship between powder tribology and aerodynamic performance of DPI formulations
    ROCHA, H. V. A. - Fundação Oswaldo Cruz
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.234E6M - Practical considerations for employing Vision Systems in Gear Monitoring
    POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.244DVA - A simplified test protocol and data processing to investigate impact-sliding wear in PWR environment
    DELLI COLLI, M. - Framatome
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.254F6H - Effect of lubricant viscosity on a boundary lubrication test
    SILVA, R. N. D. - Universidade Federal do Rio Grande do Sul
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.264FDT - Investigating the Influence of Product Microstructure on the Mechanical and Tribological Interactions of Synthetic Skin
    SHAH, T. - University of Birmingham
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
  • 04.274EBD - Electrifying tribometry for lubricant developments used in electrified drive technologies
    WOYDT, M. - MATRILUB
    Track: 12 - Tribomechadynamics, Tribotests and Monitoring
16:4017:40
OCEANIA IV
16:40 - 17:40
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 10
16:40 - 17:40
  • T07-S10.1
    16:40 - 17:00Oral presentation
    4EEA - Contact pressure tribological effect on Bi2S3-MoS2 soft coatings
    ROMERO PIETRAFESA, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
  • T07-S10.2
    17:00 - 17:20Oral presentation
    4EEW - Flow Transport and Film Evolution of Lubricant on a Rotating Disk Across a Broad Temperature Region
    WEI, C. - Beijing Institute of Technology
  • T07-S10.3
    17:20 - 17:40Oral presentation
    4EJY - Effect of Sodium Sulfate on Wear of Stainless Steel in High-Temperature and High-Pressure Water-Containing Ethanol Environment
    KAWAI, H. - Nagoya University
OCEANIA V
16:40 - 17:40
Biotribology, Biomimetics and Food Tribology
16:40 - 17:40
  • T08-S10.1
    16:40 - 17:00Oral presentation
    4ED2 - Do MXenes miss their MAX phases? Study on surface adhesion and interaction of Ti3C2Tx MXenes on porous and laser textured substrates
    GACHOT, C. - Technische Universität Wien
  • T08-S10.2
    17:00 - 17:20Oral presentation
    4EES - MXene-Reinforced CoCrMo Composites for Advanced Biotribological Applications
    NECAS, D. - Brno University of Technology
  • T08-S10.3
    17:20 - 17:40Oral presentation
    4EDM - Solid lubrication in an insect joint: a comprehensive experimental and numerical investigation
    PUTIGNANO, C. - Politecnico di Bari
OCEANIA VI
16:40 - 17:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 10
16:40 - 17:40
  • T10 - S10.1
    16:40 - 17:00Oral presentation
    4EDQ - Fluid leakage in seals: An experimental and numerical analysis
    PUTIGNANO, C. - Politecnico di Bari
  • T10 - S10.2
    17:00 - 17:20Oral presentation
    4EGD - Measurement-resolution bias in post-grinding rail RCF simulations
    ALMQVIST, A. - Lulea University of Technology / Luleå tekniska universitet
  • T10 - S10.3
    17:20 - 17:40Oral presentation
    4F6B - Friction dynamics in the presence of a third body - Application to earthquakes
    MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
OCEANIA VII
16:40 - 17:40
Nanoscale Mechanisms of Friction and Lubrication - Session 10
16:40 - 17:40
  • T04-S10.1
    16:40 - 17:00Oral presentation
    4EPF - Modelling Hair Friction in the Presence of Additives
    CERQUEIRA DIAZ, P. M. - Imperial College London
  • T04-S10.2
    17:00 - 17:20Oral presentation
    4ERQ - Compatibility of 2D MoSe₂ and WSe₂ Nanoparticles with Oil Compositions: Impact on Wear Reduction
    NEVSHUPA, R. - CSIC
  • T04-S10.3
    17:20 - 17:40Oral presentation
    4ETM - Adhesive contact mechanics via a self-consistent body-force formulation
    M S Bobji - Indian Institute of Science, Bengaluru
16:4018:00
EUROPA III-IV
16:40 - 18:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 10
16:40 - 18:00
  • T06-S10.1
    16:40 - 17:00Oral presentation
    4EAZ - Atomic-scale Tribochemical Differences During Chemical Mechanical Polishing of Copper and Silicon in the Integrated Circuits Manufacturing
    ZHANG, L. - Tsinghua University
  • T06-S10.2
    17:00 - 17:20Oral presentation
    4EBX - Tribological Behavior and Iron Ore Flow on UHMWPE Materials for Truck Body Liners
    SILVA, K. F. C. - Instituto Tecnológico Vale
  • T06-S10.3
    17:20 - 17:40Oral presentation
    4EC2 - Improved high-temperature solid particle erosion resistance of Hadfield steel by boriding
    Hernández-Peña, A. - Tecnológico de Monterrey
  • T06-S10.4
    17:40 - 18:00Oral presentation
    4ECX - The impact of spin on elastohydrodynamic contacts for traction: A Theoretical and Experimental Investigation of Ball-Disc Contact
    CARBONE, G. - Nanjing University of Science & Technology
OCEANIA I
16:40 - 18:00
Tribomechadynamics, Tribotests and Monitoring - Session 10
16:40 - 18:00
  • T12-S10.1
    16:40 - 17:00Oral presentation
    4DNF - A multiscale dynamic analysis method for jointed structures: from surface topography to nonlinear dynamic response
    XU, C. - Northwestern Polytechnical University
  • T12-S10.2
    17:00 - 17:20Oral presentation
    4DSW - Simulation and Experimental Validation of Bearing Creep simulation considering change of COF
    Loc Duc Le - Technische Universität Chemnitz
  • T12-S10.3
    17:20 - 17:40Oral presentation
    4DWG - The influence of size and Poisson's ratio on the stiffness of quasi conformal spherical contacts
    CIULLI, E. - Università di Pisa
  • T12-S10.4
    17:40 - 18:00Oral presentation
    4EXJ - Impact of blade root joints on the dynamics of intrinsically mistuned bladed disks
    FIRRONE, C. M. - Politecnico di Torino
OCEANIA II
16:40 - 18:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 10
16:40 - 18:00
  • T02-S10.1
    16:40 - 17:00Oral presentation
    4E4A - Lubricant inerting – base oil degradation in low oxygen atmosphere
    FERREIRA, L. M. - Imperial College London
  • T02-S10.2
    17:00 - 17:20Oral presentation
    4ECQ - Effect of hydrogen on the tribological properties of CoCrFeMnNi HEA
    AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
  • T02-S10.3
    17:20 - 17:40Oral presentation
    4EDC - Impact of Methanol Combustion on Piston Assembly Friction: A Combined Simulation and Experimental Study
    RAGIMOV, Y. - MSE - RWTH Aachen University
  • T02-S10.4
    17:40 - 18:00Oral presentation
    4EDE - Electrical Properties of Tribofilms formed at Electrified Interfaces
    KIM, S. H. - Pennsylvania State University
OCEANIA IX
16:40 - 18:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 10
16:40 - 18:00
  • T05-S10.1
    16:40 - 17:00Oral presentation
    4EJV - Molecular Simulations to Screen Additives for Future Fuels and Lubricants
    PUREWAL, J. S. - Imperial College London
  • T05-S10.2
    17:00 - 17:20Oral presentation
    4EJX - The Stick-Slip to Superlubricity Transition: Atomic-Scale Evidence of Graphene Oxide Tribofilm on Nitride Ceramics
    TANG, H. - Tsinghua University, University of Science & Technology Beijing
  • T05-S10.3
    17:20 - 17:40Oral presentation
    4EKM - Bubble Mechanisms in Antifoam Containing Oils
    Paul-Anaël Pogu - Imperial College London
  • 17:40 - 18:00Oral presentation
    4DTX - Influence of AC and DC Currents in Reciprocating Tribological Tests – A Novel Method for Evaluating Electrical Transmission Fluids
    ZAK, F. - Optimol Instruments Prüftechnik GmbH
OCEANIA X
16:40 - 18:00
Surface Engineering - Session 10
16:40 - 18:00
  • T01-S10.1
    16:40 - 17:00Oral presentation
    4EEN - Lubricant film thickness for EHD contacts with diamond-like carbon coatings
    POLAJNAR, M. - University of Ljubljana
  • T01-S10.2
    17:00 - 17:20Oral presentation
    4EEZ - Understanding the color variation of TiO2 thin layers by analyzing wear mechanisms of the oxide layer
    FRIDRICI, V. - Centrale Lyon
  • T01-S10.3
    17:20 - 17:40Oral presentation
    4EG6 - Optimization of Tribological Properties Based on the Example of Two-Component Surface Layer
    SEP, J. - Rzeszow University of Technology
16:4018:20
OCEANIA-VIII
16:40 - 18:20
Tribo-Induced Surface and Sub-Surface Transformations - Session 02
16:40 - 18:20
  • 16:40 - 17:00Oral presentation
    4DTQ - Residual Stress and Topography Effects on Rolling Contact Fatigue Behavior
    GOMES, G. M. D. O. - Instituto Tecnológico de Aeronáutica
  • 17:00 - 17:20Oral presentation
    4EM6 - Highly conductive and wear resistant ceramic-liquid metal composite
    ZHAO, Jianxun - Tsinghua University
  • T09-S02.1
    17:20 - 17:40Oral presentation
    4DRB - Mechanism of the Shear-Induced Formation of Metastable Copper Sulfide Tribofilms
    Wilfred T Tysoe - University of Wisconsin-Milwaukee
  • T09-S02.2
    17:40 - 18:00Oral presentation
    4DPF - Prognosis of Wiping Damage in Plain Bearings
    Markus Gilges - RWTH Aachen University
  • T09-S02.3
    18:00 - 18:20Oral presentation
    4DPZ - Forecasting Friction Behavior Despite Repeatability Challenges
    Yulong Li - Karlsruhe Institute of Technology
19:3022:30
Asia
19:30 - 22:30
19:30 - 22:30
  • GD - Gala Dinner
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
  • P05.14FCE - Tribology for Sustainable Development
    Umehara, N. - Tsinghua University
09:3010:30
OCEANIA I
09:30 - 10:30
Tribomechadynamics, Tribotests and Monitoring - Session 11
09:30 - 10:30
  • T12 -S11.1
    09:40 - 10:10Keynote Speaker
    4FC6 - Turning the Tribo-system into a Tribo-Test
    SHAFFER, S. - Shaffer Tribology Consulting formerly Bruker Nanosurfaces and Battelle Memorial Institute
  • T12 -S11.2
    10:10 - 10:30Oral presentation
    4EZ2 - Influence of the dynamic characteristics of the tribometer on the reliability of the results
    RAMALHO, A. - Universidade de Coimbra
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 11
09:30 - 10:50
  • T06-S11.1
    09:30 - 09:50Oral presentation
    4EEJ - Elastohydrodynamic lubrication friction dependence on energy density and build orientation for SLM printed AlSi10Mg and 18Ni300
    KLANJSCEK, U. - University of Ljubljana
  • T06-S11.2
    09:50 - 10:10Oral presentation
    4EEX - Application of Sliding Abrasion Tumbler Test in the evaluation of abrasive wear resistance of commercial ceramic materials used in transfer chute linings.
    Dias-Batista, L. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
  • T06-S11.3
    10:10 - 10:30Oral presentation
    4EEY - Insights on the wear behavior of rolling element bearings containing mixed-material contact interfaces
    EVANS, R. D. - The Timken Company
  • T06-S11.4
    10:30 - 10:50Oral presentation
    4EFX - In-situ NbC-reinforced self-lubricating iron matrix composites via vacuumimpregnation
    DESCHAMPS, I. S. - Universidade Federal de Santa Catarina
OCEANIA-VIII
09:30 - 10:50
Tribo-Induced Surface and Sub-Surface Transformations - Session 03
09:30 - 10:50
  • T09-S03.1
    09:40 - 10:05Invited Speaker
    4FCR - Velocity-weakening of rock friction: a thermally-driven interplay between roughness and third body
    MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
  • T09-S03.2
    10:10 - 10:30Oral presentation
    4DTZ - Triboelectro-Degradation Mechanisms in Metallic Contacts
    Hong Liang - Texas A&M University
  • T09-S03.3
    10:30 - 10:50Oral presentation
    4DVP - Influence of TiC Reinforcement Content on the Wear Mechanisms of SPS Processed Inconel 718 Composites
    pierre gorez - Centrale Lyon
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 11
09:30 - 10:50
  • T02-S11.1
    09:45 - 10:10Invited Speaker
    4DNY - Development of hBN-Based Epoxy Nanocomposite Coating for Enhanced Wear and Corrosion Resistance
    Jitendra Kumar Katiyar - Manipal Institute of Technology, Manipal
  • T02-S11.2
    10:10 - 10:30Oral presentation
    4ETX - Comparative Tribology Characterization of Hydrogen-Charged Steels
    SILVEIRA, P. L. G. D. S. - Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte, Universidade Federal do Rio Grande do Norte
  • T02-S11.3
    10:30 - 10:50Oral presentation
    4ECP - Lubricant Inerting - Performance of antiwear additives in inert atmospheres
    LUKIC, V. - Imperial College London
OCEANIA IV
09:30 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 11
09:30 - 10:50
  • T07-S11.1
    09:30 - 09:50Oral presentation
    4EMY - High-temperature fretting wear behavior of established Tribaloys and a newly developed high-entropy alloy of reduced Cobalt content
    WALZ, J. - German Aerospace Center
  • T07-S11.2
    09:50 - 10:10Oral presentation
    4EPN - Glazing of C263 Nickel Superalloy at Extreme Temperatures
    HARRISON, J.P. - University of Sheffield
  • T07-S11.4
    10:30 - 10:50Oral presentation
    4EWX - Influence of Hydrogen on the Tribological Behavior of Cast Iron Block/Piston Ring Contacts: First Insights
    CUNHA, B. S. C. - Universidade Federal de Uberlândia
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 11
09:30 - 10:50
  • T05-S11.1
    09:45 - 10:10Invited Speaker
    4FDE - Advancing Lubricant Design with Machine-Learning-Informed Molecular Dynamics
    RIGHI, M. C. - Università di Bologna
  • T05-S11.2
    10:10 - 10:30Oral presentation
    4EP6 - Neutron Imaging of Oil-Impregnated Sintered Gears for Self-Lubrication
    LOHNER, T. - Technical University of Munich, Gear Research Center
  • T05-S11.3
    10:30 - 10:50Oral presentation
    4EPH - Nanostructured Tribolayers Enabling Heavy-Load Adaptive Superlubricity in Carbon-Based Solid Films
    CHEN, X. - Tsinghua University
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 11
09:30 - 10:50
  • T10 - S11.1
    09:40 - 10:05Invited Speaker
    4FCW - Adhesion of metallic nanoparticles: Direct measurements using in situ TEM
    JACOBS, T. - University of Pittsburgh
  • T10 - S11.2
    10:10 - 10:30Oral presentation
    4EJ2 - Memory erasure in rough viscoelastic contact
    LI, Z. - Sorbonne University
  • T10 - S11.3
    10:30 - 10:50Oral presentation
    4EJB - Experimental Validation of the Heterogeneous Multiscale Methods for Modelling Laser Surface Textured Interfaces
    Montgomery, J. - University of Leeds
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 11
09:30 - 10:50
  • T04-S11.1
    09:45 - 10:10Invited Speaker
    4DNQ - Controlling Friction Properties of 2D Materials through Substrate/Surface Modification
    Philip Egberts - University of Calgary
  • T04-S11.2
    10:10 - 10:30Oral presentation
    4EVY - Enhancement of DLC Tribology Using Graphene and Nanodiamond under Solid and Water-Lubricated Conditions
    HIRATA. Y - Institute of Science Tokyo
  • T04-S11.3
    10:30 - 10:50Oral presentation
    4EYQ - Novel Materials for Solid Lubrication Based on High Entropy Alloy Disulfides
    POLCAR, T. - Czech Technical University, University of Southampton
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 11
09:30 - 10:50
  • T01-S11.1
    09:45 - 10:10Invited Speaker
    4EEM - Design and Protection Strategies of Organic Coatings
    Zhan, S. - China Academy of Machinery, Wuhan Research Institute of Materials Protection Co., Ltd.
  • T01-S11.3
    10:30 - 10:50Oral presentation
    4EKW - Development and characterisation of highly ordered and aligned nanocomposite coating through anodization for tribological applications
    S Ugar - Indian Institute of Science, Bengaluru
09:4510:50
OCEANIA V
09:45 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 11
09:45 - 10:50
  • T08-S11.1
    09:45 - 10:10Invited Speaker
    4DVT - Assembly of lipid–hyaluronan complexes in osteoarthritic conditions: bulk structure, tribology and surface films
    Mark Rutland - Royal Institute of Technology / Kungliga Tekniska Högskolan
  • T08-S11.2
    10:10 - 10:30Oral presentation
    4EXA - Pressure-Driven Microstructural Evolution and Tribological Response of CoCrMo Orthopaedic Bearings
    , M. B. - University of Birmingham
  • T08-S11.3
    10:30 - 10:50Oral presentation
    4EGQ - Multilamellar Vesicle Architecture: Linking Bilayer Stacking and Interlamellar Spacing to Membrane Mechanics
    KAEEK, M. - Weizmann Institute of Science
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 05
Poster Session 05
10:50 - 11:30
  • 05.14FBZ - An experimental approach for quantifying the mechanical strength of fretting-induced adhesion junctions
    ZABIHI, A. - Tampere University
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.24ECF - 3BoImPro: 3rd Body Image Processing, an image processing tool dedicated to third body analysis in tribology
    ALIZÉE, B. - Institut national des Science Appliquées de Lyon, Laboratoire de Mécanique des Contacts et des Structures
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.34F2B - Summit-counting method for statistical prediction of the coefficient of friction under mixed EHL conditions
    FERREIRA, N. F. - Universidade Federal do Rio Grande do Sul
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.44EKE - Surface Metrology as an Indirect Descriptor of Two-Body Abrasive Response in Steels and Gray Cast Iron under Standardized Manual Grinding
    LEAL, D. V. F. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.54EBY - Analysis of skewness (Rsk) and kurtosis (Rku) parameters and diameter and cylindricity deviations in the dry drilling of Al-Mg-Si 6351-T6 alloy
    BA, E. C. T. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.64F6D - The Influence of Volume Conservation on the Stiffness of DC01 Steel Surfaces Under Large Deformations
    OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.74EPK - Tribological Evaluation of Skin–Textile Contact under Different Counterbody Geometries
    J.G.Salinas-Cabrera - Instituto Politecnico Nacional
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.84EJZ - Tribometrological Ranking of Dental Resin Composites After Simulated Clinical Polishing Based on Functional Roughness Parameters
    Maru, M.M. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.94EWF - Surface integrity assessment of additively manufactured 316L after grinding
    Oliveira, M. V. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.104EVV - Surface Texture and Wear Behavior of a Zr-Modified AlSi5Cu2Mg Aluminum Alloy under Lubricated Sliding Conditions
    MADEJ, M. - Kielce University of Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.114EC6 - AI-Assisted Metrology of Adhesive Wear in UHMWPE and Its Correlation with Friction
    CHAVES, R. D. S. M. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.124EFM - Spectral Analysis of Micromilled Surface Roughness
    ALONSO, T. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.134EJT - Scratch-Based Ranking of UHMWPE Grades and Its Relation to Viscoelastic and Cyclic Contact Response
    KAPPS, V. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.144DRN - Metrological Reliability of In-Situ Penetration Depth in Scratch Testing of Biomedical Polymers: Effects of Device Compliance and Indenter Geometry
    KAPPS, V. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.154DTN - New methodology to assess the slip-rolling fatigue resistance of materials and thin film coatings in an oscillating benchtop tribometer
    KHOSLA, V. - Rtec Instruments Inc.
    Track: 03 - Surface Metrology and Contact Mechanics
  • 05.164DVJ - Modeling the tribocorrosion phenomenon of additively manufactured materials
    Dariusz Ulbrich - Poznan University of Technology
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.174EWP - Low-velocity impact resistance of brittle nanoporous alumina layers
    Revankar, G A - Indian Institute of Science, Bengaluru
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.184DZD - Effect of Lubricant Inerting on Micropitting Formation with PAO
    MORLEY, J. - Phoenix Tribology
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.194EHT - A Study on the Characteristics of Tribology in Type 304 Stainless Steel
    HUR, J. - Changwon National University
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.204DSM - Tailoring Tribological Performance through LPBF-Induced Porous Microstructures
    Jonas Franke - Karlsruhe Institute of Technology
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.214DVB - Mechanistic Insights into Friction Layer Formation During Burnish: A Multi-Modal Approach Using UMT TriboLab and Nanoindentation
    MOHAMADOU, D. - Bruker
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.224ESJ - Determining the critical length scale related to wear in rubber materials
    USHIODA, R. - Imperial College London
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.234EW2 - Tribological Analysis of W-Ag Electrical Contacts Produced by High-Energy Milling for the Oil and Gas Sector
    MOTA, Y. M. - Universidade Federal do Rio Grande do Norte
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.244DQ4 - Influence of nitrogen doping to tribological response of MoS2 coating in humid environments: an in-situ Raman study
    Yue Wang - Czech Technical University
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
  • 05.254F2P - New Generation of Battery Charging using Triboelectric Nanogenerators
    PERDOMO, N. V. - Concordia University Montreal
    Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
  • 05.264DYS - MXene/PVDF-Composites for Triboelectric Nanogenerators
    Natarajan Gnanaseelan - Pontificia Universidad Católica de Chile
    Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
  • 4F4T - High-temperature (300 °C) Sliding Wear Behavior of Nanostructured High-Strength Steel: Effect of Heat Treatment Mode
    IEFREMENKO, V. - Institute of Materials Research, Slovak Academy of Science
    Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 12
11:30 - 12:30
  • T06-S12.1
    11:30 - 11:50Oral presentation
    4EG2 - Microstructural and tribological investigation of niobium carbide-reinforced copper-free brake friction material produced by powder metallurgy
    VIDAL, A. A. - Universidade Federal de Santa Catarina
  • T06-S12.2
    11:50 - 12:10Oral presentation
    4EGJ - Practical Experiences with the Service Life of Greases at High Temperatures
    VALDAUF, J. - LUBRICANT s r.o.
  • T06-S12.3
    12:10 - 12:30Oral presentation
    4EGR - Putting boundary friction effects into cold strip rolling mixed lubrication models
    MONTMITONNET, P. - MINES Paris, PSL University, Centre for material forming (CEMEF)
OCEANIA-VIII
11:30 - 12:30
Tribo-Induced Surface and Sub-Surface Transformations - Session 04
11:30 - 12:30
  • T09-S04.1
    11:30 - 11:50Oral presentation
    4DX2 - Consideration of surface degradation in powder-lubricated interfaces
    ARGHIR, M. - Institut Pprime
  • T09-S04.2
    11:50 - 12:10Oral presentation
    4E2J - Quantitative evolution of tribo-layers in copper based friction materials for high-speed trains operating at 400 km/h equivalent energy density: Ratio of formation to damage
    XU, Yuxuan - Central South University (Zhongnan University)
  • T09-S04.3
    12:10 - 12:30Oral presentation
    4ENS - Construction of heavy-load superlubricity based on the nanoclustering and ordering orientation of the tribo-products
    DENG, W. - Tsinghua University
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 12
11:30 - 12:30
  • T12-S12.1
    11:30 - 11:50Oral presentation
    4E2M - Towards Reproducible Tribology: High-Replication Experiments and StatisticalEvaluation of Measurement Uncertainty and System Variability
    ORGELDINGER, C. - University of Bayreuth
  • T12-S12.2
    11:50 - 12:10Oral presentation
    4EHB - Friction monitoring during vibration using solitary waves
    FANTETTI, A. - Imperial College London
  • T12-S12.3
    12:10 - 12:30Oral presentation
    4DZY - Experimental study of friction-induced vibrations in sliding rough contacts
    LE BOT, A. - Centrale Lyon
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 12
11:30 - 12:30
  • T02-S12.1
    11:30 - 11:50Oral presentation
    4EE6 - Shear Velocity Dependent Stick-Slip Motion of Soft and Hard Solid Interfaces
    KATIYAR, J. K. - Manipal Institute of Technology, Manipal
  • T02-S12.2
    11:50 - 12:10Oral presentation
    4EFD - Study on Groove Shape Design for Bearing Performance Improvement
    Keisei Watanabe - Tokai University
  • T02-S12.3
    12:10 - 12:30Oral presentation
    4EFE - Research on Improving Friction Reduction in Journal Bearings— Study and Evaluation of a New Micro-Bubble Generation Method —
    SAKABE, SHODAI - Tokai University
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 12
11:30 - 12:30
  • T07-S12.1
    11:30 - 11:50Oral presentation
    4EYA - Experimental investigation of wear behaviour and debris evacuation in an aerospace-grade material pair under high-temperature conditions
    Marinescu A. - Institut national des Science Appliquées de Lyon
  • T07-S12.2
    11:50 - 12:10Oral presentation
    4EZ6 - Tribological behavior of a a-C coated AISI 4340 under seawater lubricated conditions for Oil and Gas Injection Valves
    FREIRE, A. D. - Universidade de São Paulo
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 12
11:30 - 12:30
  • T05-S12.1
    11:30 - 11:50Oral presentation
    4EPX - Effect of carbon nanomaterials on the structure and chemistry of ZDDP tribofilms
    PRIETO, G. - Consejo Nacional de Investigaciones Científicas y Técnicas, Instituto de Fisica del Sur, Universidad Nacional del Sur
  • T05-S12.2
    11:50 - 12:10Oral presentation
    4EDN - Influence of the environment on the tribological properties of a solid lubricant transfer film containing MoS2
    REY, T. - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
  • T05-S12.3
    12:10 - 12:30Oral presentation
    4EQR - Rolling–Sliding Friction Behavior of a combination of Copper Oleate and EP Additives in a Low-Viscosity Lubricant Compared with Commercial Oils
    ARMENDARIZ-MOLINERO, B. - Fundación Tekniker
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology
11:30 - 12:30
  • T08-S12.1
    11:30 - 11:50Oral presentation
    4EGW - Tribologically induced mechanisms of articular cartilage lubrication
    CIPEK, P. - Brno University of Technology
  • T08-S12.2
    11:50 - 12:10Oral presentation
    4EGY - Influence of Mixed Mesh-Size Network on Friction in Hydrogel Contacts
    MAUCHLINE, S. E. R. - University of Birmingham
  • T08-S12.3
    12:10 - 12:30Oral presentation
    4EHE - Rheometer- based tribology of Hemiarthroplasty Bearing Materials
    WIMMER, M. - Rush University Medical Center
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 12
11:30 - 12:30
  • T10-S12.1
    11:30 - 11:50Oral presentation
    4EKK - Thin Film-Forming Mechanisms of Aqueous Lubricant in Elastohydrodynamic Lubrication
    MAZUYER, D. - École Centrale de Lyon
  • T10-S12.2
    11:50 - 12:10Oral presentation
    4ENF - The best from each scale: a methodological framework for coupling dry third body models and contact mechanics
    MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
  • T10-S12.3
    12:10 - 12:30Oral presentation
    4F66 - Topography Evolution Across Grain Boundaries During Directional Scratching of Crystalline Metals
    AGHABABAEI, R. - Aarhus University / Aarhus Universitet
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 12
11:30 - 12:30
  • T04-S12.1
    11:30 - 11:50Oral presentation
    4F2Y - Intermolecular forces of single MXene flakes prepared by interfacial deposition
    BILOTTO, P. - Technische Universität Wien
  • T04-S12.2
    11:50 - 12:10Oral presentation
    4F4F - Influence and Regulation of Surface Forces and Lubrication by Nanoscale Surface Roughness
    FENG, B. - Tsinghua University
  • T04-S12.3
    12:10 - 12:30Oral presentation
    4F6K - Fluid film effect on the motion of an externally excited loosely supported tubular structure
    DELLI COLLI, M. - Framatome
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 12
11:30 - 12:30
  • T01-S12.1
    11:30 - 11:50Oral presentation
    4EMD - Effect of gas nitriding on tribological and fretting characteristics of 3D-printed Ti-6Al-4V alloy in simulated body fluid
    LAVRYS, S. - Vytautas Magnus University
  • T01-S12.2
    11:50 - 12:10Oral presentation
    4EKT - Influence of surface texture edge angle on tribological performance of laser textured tools in sheet metal forming
    GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
  • T01-S12.3
    12:10 - 12:30Oral presentation
    4EPV - Surface Topography effect on Compound Layer Thickness in Plasma-Nitrided Gray Cast Iron
    AQUINO, B. B. D. - Universidade Federal de Santa Catarina
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
  • PJA04.14FCP - Understanding and controlling superlubricity of solids
    MA, T. - Tsinghua University
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 13
14:40 - 16:00
  • T06-S13.1
    14:40 - 15:00Oral presentation
    4EHC - Abrasive wear of Fe–SiC cermets processed by hot pressing and spark plasma sintering
    Oropesa. Y - Universidad de Concepción
  • T06-S13.2
    15:00 - 15:20Oral presentation
    4EHP - A Universal Strategy for Uniform Patterning of Diverse Functional Materials via Controlled Marangoni Flow
    WANG, G. - Tsinghua University
  • T06-S13.3
    15:20 - 15:40Oral presentation
    4EK6 - How Hybrid scCO₂-MQL Lubrication Controls Tribology and Surface Integrity in Ti-6Al-4V Machining
    XU, N. - University of Leeds
  • T06-S13.4
    15:40 - 16:00Oral presentation
    4EKD - Experimental investigation of a hydrodynamic journal bearing operating under servere conditions
    RAVAUD, L. - Institut Pprime
OCEANIA-VIII
14:40 - 16:00
Tribo-Induced Surface and Sub-Surface Transformations - Session 05
14:40 - 16:00
  • 14:40 - 15:00Oral presentation
    4E4W - Analysis of Wear Mechanisms and Microstructural Modifications of Grease-Lubricated Thrust Ball Bearings under False Brinelling
    TREVISIOL, C. - Centre Technique des Industries Mécaniques
  • T09-S05.2
    15:00 - 15:20Oral presentation
    4E6S - Wear resistance of boron-activated 316L steel: Comparing elemental Ti and TiB₂ additions
    BAGNARA, N. S. - Universidade de Caxias do Sul
  • T09-S05.3
    15:20 - 15:40Oral presentation
    4EBE - The amorphization route of sp2 carbon during incremental load dry sliding tests
    Araya, N. - Universidad de Concepción
  • T09-S05.4
    15:40 - 16:00Oral presentation
    4EBM - A Molecular Dynamics Study on Friction Induced Melting
    WANG, Y. - Tsinghua University
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 13
14:40 - 16:00
  • T12-S13.1
    14:40 - 15:00Oral presentation
    4DQQ - Unraveling Vibroadhesion: How Test Parameters Influence Vibration- Modulated Adhesion
    Michele Tricarico - Politecnico di Bari
  • T12-S13.2
    15:00 - 15:20Oral presentation
    4DVZ - Effect of Material Pairing on Acoustic Emission Features During Dry Sliding
    Lars Friedrich - Technische Universität Chemnitz
  • T12-S13.3
    15:20 - 15:40Oral presentation
    4EHA - High-speed optical imaging of dry metallic impacts for structural diagnostics
    FANTETTI, A. - Imperial College London
  • T12-S13.4
    15:40 - 16:00Oral presentation
    4DX6 - Experimental evidence of dynamic stiction without static friction: Friction vector rotation creates intermittent slippage
    NAKANO, K. - Yokohama National University
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 13
14:40 - 16:00
  • T02-S13.1
    14:40 - 15:00Oral presentation
    4EFY - Evolution of 100Cr6 and 316L planes against 100Cr6 balls behavior in hydrogen environment with a high pressure tribometer
    PIEGARD, R. - Centre Technique des Industries Mécaniques
  • T02-S13.2
    15:00 - 15:20Oral presentation
    4EHH - Experimental and theoretical study of a multi-recess compliant hydrostatic thrust bearing
    Marinescu A. - Institut national des Science Appliquées de Lyon
  • T02-S13.3
    15:20 - 15:40Oral presentation
    4DQX - Impact of Electrical Current on the Tribological Performance of MoDTC Additives
    Zhengyuan PENG - Centre de Mise En Forme de Matériaux
  • T02-S13.4
    15:40 - 16:00Oral presentation
    4EHZ - The effect of gallic acid derivatives additives in oil lubrication systems using SUJ2 steel
    IKOMA, K. - Railway Technical Research Institute, Tohoku University
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 13
14:40 - 16:00
  • T05-S13.1
    14:40 - 15:00Oral presentation
    4ERM - Mechanism of Sulfur-Based Tribofilm Formation and Frictional Properties under Controlled Atmospheres
    LIN, S. - Kyoto University
  • T05-S13.2
    15:00 - 15:20Oral presentation
    4ERR - Toward High Performance Greases by Incorporating Tribofilm-Forming Zirconia Nanocrystals
    DA SILVA CARDOSO, Mateus - University of Pennsylvania
  • T05-S13.3
    15:20 - 15:40Oral presentation
    4EMV - Tribological Performance of MWCNT Nanolubricants for Electric Vehicle Transmissions
    ARAÚJO, L. C. D. - Universidade Federal do Rio Grande do Norte
  • T05-S13.4
    15:40 - 16:00Oral presentation
    4EWV - Mitigation of Electrochemical Wear in Steel Contacts Lubricated under Electric Current by Ionic Liquid additive
    , S. M. A. - Universidade Federal do Rio Grande do Norte
OCEANIA V
14:40 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 13
14:40 - 16:00
  • T08-S13.2
    15:00 - 15:20Oral presentation
    4EKC - The Potential of Solid Lubricants as Friction and Wear Modifiers in Restorative Materials for Dentistry
    RODZIEWICZ-WEREMCZUK, M. - Bialystok University of Technology
  • T08-S13.3
    15:20 - 15:40Oral presentation
    4EKQ - Limits of Friction-Based Assessment in Dental Cleaning Systems
    CIPEK, P. - Brno University of Technology
  • T08-S13.4
    15:40 - 16:00Oral presentation
    4EKR - Applying Tribology to Cosmetic Products: Exploring the Relationship Between Formulation and Friction
    NAR, K. - PCS Instruments Ltd
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 13
14:40 - 16:00
  • T10-S13.1
    14:40 - 15:00Oral presentation
    4EP4 - Finite deformations in frictional sliding: how does the contact area change?
    MENGA, N. - Politecnico di Bari
  • T10-S13.2
    15:00 - 15:20Oral presentation
    4EPZ - A promising approach to investigate third body flows: HPT and X-ray tomography
    DESCARTES, S. - Institut national des Science Appliquées de Lyon
  • T10-S13.3
    15:20 - 15:40Oral presentation
    4DW6 - Micro-Scale Investigation of Friction and Wear in Journal Bearing Materialsunder Starved Lubrication Conditions
    Kiro Scholtes - Technische Universität Braunschweig
  • T10-S13.4
    15:40 - 16:00Oral presentation
    4F6R - Programmable Torque Transmission Using Inflatable Interlocking Metainterfaces
    ROGKAS, N. - National Technical University of Athens
OCEANIA VII
14:40 - 16:00
Triboeletric Nanogenerators for Energy Sensors - Session 01
14:40 - 16:00
  • T11 -S01.1
    14:50 - 15:20Keynote Speaker
    4DQC - High-Efficiency Hybrid Nanogenerators for Self-Powered Marine Monitoring Systems
    Junyi Zhai - Beijing Institue of Nanoenergy and Nanosystems
  • T11 -S01.2
    15:20 - 15:40Oral presentation
    4E6B - Robust Solid-Liquid Triboelectric Nanogenerators: Mechanisms, Strategies and Applications
    WANG, D. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • T11 -S01.3
    15:40 - 16:00Oral presentation
    4DVR - Impact of Process Parameters on the Performance of Triboelectric Nanogenerators in Lateral Sliding Mode
    Philipp Mattauch - University of Bayreuth
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 13
14:40 - 16:00
  • T01-S13.1
    14:40 - 15:00Oral presentation
    4EQ4 - Hydrophobic Surface Functionalization via Ultrashort-Pulse Laser Texturing
    VIEIRA, A. - Centro Universitário SENAI São Paulo, Universidade de São Paulo
  • T01-S13.2
    15:00 - 15:20Oral presentation
    4EQE - Slurry-erosive wear behaviour of a-C:Si:O:H coatings deposited by PECVD
    SILVA, P. - Universidade Federal do Espírito Santo
  • T01-S13.4
    15:40 - 16:00Oral presentation
    4EQW - Effect of Plasma Nitriding on Abrasive Wear Resistance of Chromium White Cast Iron
    CARDOSO, E. D. S. - Universidade Federal de Santa Catarina
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:0016:40
America
16:00 - 16:40
Session
Poster Session 06
Poster Session 06
16:00 - 16:40
  • 06.14EV6 - The Effect of Simulated Gait on the Micromotion and Corrosion of Modular Tapers
    BEADLING, A. R. - University of Birmingham
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.24EPT - Wear behavior of low elastic modulus Ti–Nb–Si alloys under simulated physiological conditions
    CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.34EAJ - Influence of graphene oxide content on the coefficient of friction of a dental resin composite under reciprocating sliding
    PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.44EEE - Rheological and Soft Tribological Characterization of an Oat-Based Functional Food Enriched with Curcumin-Loaded Solid Lipid Nanoparticles
    FAVALESSA, G. A. - Universidade Federal do Espírito Santo
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.54DQ2 - Bioinspired Micropatterned Scaffolds Fabricated via Two-Photon Polymerization for Retinal Cell Behavior Control
    , M. T. - Politecnico di Bari
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.64EEB - A review on tribological aspects of PEEK coatings for orthopaedic implants
    SANTOS, M. G. - Universidade Tecnológica Federal do Paraná
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.74DZK - Evaluation of Bladeless Fan with Wavy Ledge Design for Noise Reduction and Efficiency
    IBRAHIM, M. D. - Universiti Malaysia Sarawak
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.84EVS - Surface and Tribological Characteristics of TiN, CrN and ZrN Coatings on AISI 316L Stainless Steel for Medical Applications
    MADEJ, M. - Kielce University of Technology
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.94DP4 - Challenges of materials selection and lubrication for hip prosthetic implants
    Sujeet Kumar Sinha - Indian Institute of Technology Delhi
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.104EXB - Properties of flowable composite materials used for dental fillings
    DRABIK, S. - Kielce University of Technology
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.114FBN - Epithelial Mechanics | Actin Reorganization Under Shear
    SAWYER, W. G. - Moffitt Cancer Center
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.124DMJ - μSyn - Functional Mucin Mimetics through Shear Labile Interaction Polymers (SLIPs)
    SAWYER, W. G. - Moffitt Cancer Center
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.134DXG - Novel biomimetic synthetic injectable macromolecular materials for efficient lubrication treatment of osteoarthritis
    ZHAO, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
    Track: 08 - Biotribology, Biomimetics & Food Tribology.
  • 06.144EMQ - Friction-Induced Tribochemical Processes in Minimal Mixtures
    FANG, C. - Technische Universität Braunschweig
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.154DRY - EHL simulation considering the elastic deformation of rough surfaces caused by hydrodynamic pressure
    Christopher Platis - Friedrich-Alexander-Universität Erlangen-Nürnberg
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.164DPK - Simulation-Driven Insight into Wear Performance of Laser Powder Bed Fused 316L Stainless Steel
    BARRIONUEVO, G. O. - Universidad San Francisco de Quito
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.174DZM - Air-lubricant thin film rotating flows: An image-based, homogenised interface modelling framework
    ROGKAS, N. - National Technical University of Athens
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.184F2F - Understanding wear behavior in metallic and composite materials
    NOEL, - Université du Maine le Mans Laval
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.194DSZ - Axial sealing in scroll expanders is studied using a pin-on-disc test bench. Measured leakage rates are compared to models coupling contact mechanics and gas flow. Results show good agreement and help identify the most suitable flow model.
    TOURNIS Stéphane_ - Université de Poitiers
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.204FBX - Frictional Transition of Viscoelastic Solids near Wave-Speed Sliding
    IWASHITA, W. - National Institute of Advanced Industrial Science and Technology, The University of Osaka
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.214DN4 - Understanding the activation volume in mechanochemistry at frictional interface
    Yang Wang - Southwest Jiaotong University
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.224EVQ - General Optimization Method and Parameter Correlation Analysis of Herringbone-grooved Mechanical Face Seals Based on THD Lubrication Model
    LI, Y. - Qingdao Agricultural University
    Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
  • 06.234E4Z - Use of neural networks for the prediction of viscosity in extreme pressure andshear rate operating conditions
    ALIZÉE, B. - Laboratoire de Mécanique des Contacts et des Structures
    Track: 13 - AI-STLE - Artificial Intelligence for Smart Tribology and Lubrication Engineering
  • 06.244EHF - AI-driven prediction of scratch responses in carbide-reinforced martensitic steel
    MACHADO, I. F. - Universidade de São Paulo
    Track: 13 - AI-STLE - Artificial Intelligence for Smart Tribology and Lubrication Engineering
16:4017:40
EUROPA III-IV
16:40 - 17:40
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 14
16:40 - 17:40
  • T06-S14.1
    16:40 - 17:00Oral presentation
    4EKS - Effect of Tempering Treatment on Microstructure and Mechanical Properties of D2 Tool Steel for Wear‑Intensive Applications
    YARASU, V. - Institute of Metals and Technology
  • T06-S14.2
    17:00 - 17:20Oral presentation
    4ENQ - Friction Modification on Wet Rails: Adhesion, Wear and RCF
    SKURKA, S. - Brno University of Technology
  • T06-S14.3
    17:20 - 17:40Oral presentation
    4ENM - Dry-Sliding Wear Resistance of AISI 410L Martensitic Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated Conditions
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
OCEANIA-VIII
16:40 - 17:40
Tribo-Induced Surface and Sub-Surface Transformations - Session 06
16:40 - 17:40
  • T09-S06.1
    16:40 - 17:00Oral presentation
    4EED - Dopant-Controlled Stabilization of ta-C under Current-Carrying Sliding
    DANELON, M. R. - Universidade de São Paulo
  • T09-S06.2
    17:00 - 17:20Oral presentation
    4EHQ - Electrical Surface Damage Characteristics of Rolling Contacts Under Different Lubrication Regimes
    POWERS, D. - University of Southampton
  • T09-S06.3
    17:20 - 17:40Oral presentation
    4EHY - Layer Thickness-Dependent Deformation and Damage Transitions in DLC/WC Multinanolayer Coatings
    AGHABABAEI, R. - Aarhus University / Aarhus Universitet
OCEANIA IV
16:40 - 17:40
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 18
16:40 - 17:40
  • T06-S18.1
    16:40 - 17:00Oral presentation
    4EVK - The impact of water and hydraulic oil contamination in cold rolling oil on the surface quality of stainless steels.
    FARIA, G. S. - Aperam South America
  • T06-S18.2
    17:00 - 17:20Oral presentation
    4EWW - Beyond the Friction Coefficient: Creep Curves for Wheel–Rail Friction Assessment
    GALAS, Radovan - Brno University of Technology
  • T06-S18.3
    17:20 - 17:40Oral presentation
    4EXM - The dominant role of carbide network architecture over chromium content in the scratch response of high-chromium cast irons grinding media
    BORTOLETO, E. M. - Instituto Tecnológico Vale
OCEANIA V
16:40 - 17:40
Biotribology, Biomimetics and Food Tribology - Session 14
16:40 - 17:40
  • T08-S14.1
    16:40 - 17:00Oral presentation
    4EKY - Acoustic Emission Associated with Stick–Slip in Human Skin–Surface Contact
    CALIN, A. - NAtional University of Science and Technology POLITEHNICA Bucharest
  • T08-S14.2
    17:00 - 17:20Oral presentation
    4END - Laser-induced nanospikes on the tribological and antibacterial properties of titanium and bioceramics
    BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
  • T08-S14.3
    17:20 - 17:40Oral presentation
    4EMZ - Tribological behavior of micro-arc oxidation coatings containing Ag nanoparticles produced on titanium substrate
    MAJ, Ł. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences
OCEANIA VI
16:40 - 17:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 14
16:40 - 17:40
  • T10-S14.1
    16:40 - 17:00Oral presentation
    4ER2 - Design of Experiments Optimization NbC and Graphite in Sintered Ferrous Brake Pads
    FRANÇOZO, A. D. O. - Universidade Federal de Santa Catarina
  • T10-S14.2
    17:00 - 17:20Oral presentation
    4ERA - Shear Orientation Observation of Grease Thickener Using Rheo-SALS and Its Modeling
    CHUN, H. - Kyoto University
OCEANIA VII
16:40 - 17:40
Triboeletric Nanogenerators for Energy Sensors - Session 02
16:40 - 17:40
  • T11-S02.1
    16:40 - 17:10Invited Speaker
    4DMW - Triboelectricity-driven green catalysis via contact electrification
    Di Wei - Beijing Institue of Nanoenergy and Nanosystems
  • T11-S02.2
    17:10 - 17:30Oral presentation
    4DYC - Mutual Effects of Interfacial Charge Transfer and Light in Solid-Liquid Contact
    ZHU, S. - Tsinghua University
  • T11-S02.3
    17:30 - 17:50Oral presentation
    4DZP - Time-dependent Behavior and Wear Resistance of DLC-coated Triboelectric Nanogenerators
    HILGERT, A. - University of Bayreuth
OCEANIA X
16:40 - 17:40
Surface Engineering - Session 14
16:40 - 17:40
  • T01-S14.1
    16:40 - 17:00Oral presentation
    4ERP - Effects of ultrasonic surface rolling processing on the surface properties of 4Cr13 stainless steel
    Luo, X. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
  • T01-S14.2
    17:00 - 17:20Oral presentation
    4ESD - Enhanced High-Temperature Tribological Properties of Double Co-Doped DLC Coatings Prepared by FCVA
    ZHANG, R. - Institute of Science Tokyo
  • T01-S14.3
    17:20 - 17:40Oral presentation
    4ERV - Tribological performance of single-step fs-laser-induced dual-scale surface structures on Ti6Al4V
    ZABALA, A. - Universidad de Mondragon Mondragon Unibertsitatea
16:4018:00
OCEANIA II
16:40 - 18:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 14
16:40 - 18:00
  • T02-S14.1
    16:40 - 17:00Oral presentation
    4EKA - Effecto of conductive particles on Rheology, tribology and electrical properties of greases
    PONDICHERRY, K. - Anton Paar GmbH
  • T02-S14.2
    17:00 - 17:20Oral presentation
    4EKB - Environmental and tribological assessment of cutting fluids produced from aminolyzed castor oil
    FERREIRA, N. F. - Universidade Federal do Rio Grande do Sul
  • T02-S14.3
    17:20 - 17:40Oral presentation
    4EJJ - The effect of electric potentials on the initiation and progression of surface initiated rolling contact fatigue
    WAINWRIGHT, B. - PCS Instruments Ltd
  • 17:40 - 18:00Oral presentation
    4EJ4 - Novel Polymeric Friction Modifier to Optimize Lubricity and Inorganic Additives Synergy
    Pieter Struelens - Oleon NV
OCEANIA IX
16:40 - 18:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 14
16:40 - 18:00
  • T05-S14.1
    16:40 - 17:00Oral presentation
    4EXW - High-speed thermoelastohydrodynamic friction with entrained air
    MACLAREN, A. - PCS Instruments Ltd
  • T05-S14.2
    17:00 - 17:20Oral presentation
    4EXZ - Role of hBN nanoparticles in PEG on boundary friction and lubrication in non-conformal contacts
    ŠPERKA, P. - Brno University of Technology
  • T05-S14.3
    17:20 - 17:40Oral presentation
    4EY4 - Friction Performance of Bio-Oils Obtained by Different Cell Disruption Methods
    VIEIRA, L. - Instituto Tecnológico de Aeronáutica, Universidade do Vale do Paraíba
16:4018:20
OCEANIA I
16:40 - 18:20
Tribomechadynamics, Tribotests and Monitoring - Session 14
16:40 - 18:20
  • T12-S14.1
    16:40 - 17:00Oral presentation
    4DVK - Experimental determination of evolution of the coefficient of friction andimplementation in a simulation routine
    Denny Knabner - Technische Universität Chemnitz
  • T12-S14.2
    17:00 - 17:20Oral presentation
    4DVQ - Rotating tribometer at high temperature for understanding copper extrusion tool wear
    GOREZ, P. - Centrale Lyon
  • T12-S14.3
    17:20 - 17:40Oral presentation
    4EPP - Galling behaviour of AZ80 magnesium alloy and H13 steel by using an adapted four-ball tester
    J. A. FRIAS-FLORES - Instituto Politécnico Nacional
  • T12-S14.4
    17:40 - 18:00Oral presentation
    4F4R - Low-Speed Lubrication Behaviour of Greases for Wind Turbine Main Shaft Bearings Assessed by EIS
    MANJUNATH, M. - Balasubramaniam Vengudusamy, Dieter Fauconnier, Ghent University / Universiteit Gent
  • 18:00 - 18:20Oral presentation
    4FDV - Locomotion Dynamics: Learning from human to inspire the control of humanoid robot
    DAI, Z. - Nanjing University of Aeroanutics and Astronautics
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
  • P06.14DTR - Lessons from Nature: Bioinspired Mechanically Durable and Self-healing Superliquiphilic/phobic Surfaces for Green Tribology
    Bharat Bhushan - Ohio State University
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 15
09:30 - 10:50
  • T06-S15.1
    09:30 - 09:50Oral presentation
    4EPQ - Quantification of Zn adhesion on cast iron for stamping tools
    CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
  • T06-S15.2
    09:50 - 10:10Oral presentation
    4EQ2 - Effect of Multiple Metallic Powder Reuse Cycles on the Tribological Performance of Additively Manufactured 316L Stainless Steel by L-DED
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • T06-S15.3
    10:10 - 10:30Oral presentation
    4EQB - From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
    YUAN, Y. - University of Leeds
  • T06-S15.4
    10:30 - 10:50Oral presentation
    4EQZ - EFFECT OF WELD DEFECTS IN RAILS ON WEAR NUMBER TGAMMA USING DYNAMIC MULTIBODY MODELING
    RESTREPO-BARRIENTOS, P. - Instituto Tecnológico Metropolitano, Universidad Nacional de Colombia
OCEANIA-VIII
09:30 - 10:50
Tribo-Induced Surface and Sub-Surface Transformations - Session 07
09:30 - 10:50
  • T09-S07.1
    09:30 - 09:50Oral presentation
    4EXG - The Role of Hydrogen in Rolling Contact Fatigue of Bearing Steels
    Kinza Jamil - Imperial College London
  • T09-S07.2
    09:50 - 10:10Oral presentation
    4F2Z - Influence of diffused hydrogen on cavitation-erosion resistance and damage mechanisms of 316L stainless steel
    Stefanie Hanke - Universität Duisburg Essen
  • T09-S07.4
    10:30 - 10:50Oral presentation
    4FBG - Exceptional high-temperature wear resistance in CoCrFeMnNi high-entropy alloy composite via Al/Ti doping and hBN/TiC dual ceramic reinforcement
    Tisov, O. - Xi'An Jiaotong University
OCEANIA I
09:30 - 10:50
Surface Engineering - Session 18
09:30 - 10:50
  • T01-S18.3
    10:10 - 10:30Oral presentation
    4F4D - Effect of triangular shaped textures on the performance of mechanical seals
    BRUNETIERE, N. - Institut Pprime
  • T01-S18.4
    10:30 - 10:50Oral presentation
    4F4X - From Plasma Surface Alloying to Integrated Surface Engineering Strategies: a Route to Densify Gray Iron Surfaces
    PIGOSSO, T. - Universidade Federal de Santa Catarina
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 15
09:30 - 10:50
  • T02-S15.1
    09:30 - 09:50Oral presentation
    4EMX - A pathway to sustainable wear protection: Strengthened iron aluminide coatings omitting critical raw materials
    EDER, S. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
  • T02-S15.2
    09:50 - 10:10Oral presentation
    4EN6 - Numerical and Experimental Results for Grooved Dry Gas Seals
    JOLLY, P. - Institut Pprime
  • T02-S15.3
    10:10 - 10:30Oral presentation
    4ENH - Effect on the plasticity of austenitic stainless steel 304L after ball-on-disc tribotesting in a hydrogen atmosphere
    RODRIGUES, A. C. P. - Centrale Lyon
  • T02-S15.4
    10:30 - 10:50Oral presentation
    4EXV - Friction and wear behaviour of fully bio-based nanocellulose composites
    KNEISSL, L. M. - Luleå University of Technology, University of Ljubljana
OCEANIA IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 19
09:30 - 10:50
  • T06-S19.1
    09:30 - 09:50Oral presentation
    4EYC - Comparison of the Abrasion Resistance of High-Performance Steels Using Ball Cratering Micro-Abrasion
    EUZEBIO, L. S. - Universidade Federal do Rio Grande do Sul
  • T06-S19.2
    09:50 - 10:10Oral presentation
    4EYN - Erosive Wear of Wire-Based Additively Manufactured 316L Stainless Steel
    BRAGANÇA, B. C. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
  • T06-S19.3
    10:10 - 10:30Oral presentation
    4F4K - Simulation and Experimental Study on Copper fluid Jet Polishing
    GUO, D. - Tsinghua University
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 15
09:30 - 10:50
  • T10-S15.1
    09:40 - 10:05Invited Speaker
    4EDA - A unified thermo-mechanical framework for rolling-sliding rubber-ice friction
    MAZUYER, D. - École Centrale de Lyon
  • T10-S15.2
    10:10 - 10:30Oral presentation
    4ETH - Impact of Carbon Fiber Surface Modification on Wear Mechanisms in CFRP Composites
    MENDONÇA, A. S. D. - Universidade Federal de Santa Catarina
  • T10-S15.3
    10:30 - 10:50Oral presentation
    4EWT - Transition Characteristics of Fluid/Mixed Friction Regimes on Cylinder Block/Valve Plate Interface of a Wide-Range Variable-Speed Axial Piston Pump
    LYU, D C. - Beihang University (Beijing University of Aeronautics and Astronautics)
OCEANIA VII
09:30 - 10:50
Triboeletric Nanogenerators for Energy Sensors - Session 03
09:30 - 10:50
  • T11-S03.1
    09:40 - 10:05Invited Speaker
    4FCZ - Invited talk - Zhen Wen
    WEN, Zhen - Soochow University
  • T11-S03.2
    10:10 - 10:30Oral presentation
    4DNC - Triboelectric Self-Powered Sensing and Digital Twin Mapping for Train Wheelset Bearings
    WANG SONG - Tsinghua University China
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 15
09:30 - 10:50
  • T01-S15.1
    09:30 - 09:50Oral presentation
    4ESF - Tribocorrosive Wear in Miller Tests of Tool Steels and High Chromium Cast Iron Used in Mining Industry
    SANTOS, J. M. A. D. - Instituto Tecnológico Vale
  • T01-S15.2
    09:50 - 10:10Oral presentation
    4ESH - Influence of microstructure and hardness of WC-Co studs on laboratory and HPGR field test performance
    SANTOS, J. M. A. D. - Instituto Tecnológico Vale
  • T01-S15.4
    10:10 - 10:30Oral presentation
    4ET6 - The effect of structure on the wear resistance of a hydrotalcite-like coating grown on Zn alloy substrate
    ZIMOWSKI, S. - AGH University of Krakow
09:3011:00
OCEANIA IX
09:30 - 11:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 15
09:30 - 11:00
  • T05-S15.1
    09:30 - 10:00Keynote Speaker
    4EBT - Tribochemistry in superlubricity of water-based lubricants
    KALIN, M. - University of Ljubljana
  • T05-S15.2
    10:00 - 10:20Oral presentation
    4ENG - Tribological Performance of Water-Based Lubricants at High Speeds
    FONG, W. - Imperial College London
  • T05-S15.3
    10:20 - 10:40Oral presentation
    4EYW - A Multi-Technique Experimental Framework for Assessing LubricantDriven White Etching Crack Formation in Rolling Bearing
    BAHI, H. E. - TotalEnergies
  • 10:40 - 11:00Oral presentation
    4ECA - Co-optimizing friction and conductivity of carbon tribofilms on Pt-Au alloys
    DELRIO, F.W. - Sandia National Laboratories
09:4510:50
OCEANIA V
09:45 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 15
09:45 - 10:50
  • 09:45 - 10:10Invited Speaker
    4DYD - Improvement in Salivary Lubrication for Xerostomia (Dry Mouth) Patients
    SHARMA, P. K. - University Medical Center Groningen
  • T08-S15.2
    10:10 - 10:30Oral presentation
    4ENP - Improvements to oral tribology test methodologies for xerostomia aid optimisation
    BARRETT, E. - Imperial College London
  • T08-S15.3
    10:30 - 10:50Oral presentation
    4ENR - Engineering Fluid–Porous Interface Affinity for Reversible Infiltration and Release in Biomimetic Tribological Contacts
    SARDIELLO, M. G. - Freudenberg Technology Innovation SE & Co. KG, Istituto Italiano di Tecnologia, University of Salento
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 16
11:30 - 12:30
  • T06-S16.1
    11:30 - 11:50Oral presentation
    4ER4 - Synergistic wear mechanisms in grinding media: how does the wear of grinding balls occur?
    CAMPIDELI, V. C. - Instituto Tecnológico Vale
  • T06-S16.2
    11:50 - 12:10Oral presentation
    4ES2 - Optimisation of EV drivetrain fluids using a system-level efficiency model
    SHORE, J. - Imperial College
  • T06-S16.3
    12:10 - 12:30Oral presentation
    4ES4 - Study on the Tribological Properties of TiC-316L Composites Prepared by MEAM
    ZHOU, S. - China University of Mining & Technology Beijing
OCEANIA-VIII
11:30 - 12:30
Tribo-Induced Surface and Sub-Surface Transformations - Session 08
11:30 - 12:30
  • T09-S08.1
    11:30 - 11:50Oral presentation
    4EXT - Electrically Tunable Behavior of Nb-Doped MoS2 Coatings
    DANELON, M. R. - Universidade de São Paulo
  • T09-S08.2
    11:50 - 12:10Oral presentation
    4EZN - Effect of Ti2SnC on properties of iron-based hybrid self-lubricating composites
    NEVES, G. O. - Universidad del Biobio
OCEANIA I
11:30 - 12:30
Surface Engineering - Session 19
11:30 - 12:30
  • T01-S19.1
    11:30 - 11:50Oral presentation
    4F6M - Tribological Behavior of Plasma-Nitrided Steels Evaluated by Gear Contact Fatigue Test
    ANDRIONI, T. D. - Universidade Federal de Santa Catarina
  • T01-S19.3
    11:50 - 12:10Oral presentation
    4FAB - Effect of plasma nitriding on electrified tribological contacts: the case of oil-lubricated AISI 4140 steel
    PIRES, J. A. - Universidade Federal de Santa Catarina
  • 12:10 - 12:30Oral presentation
    4EBC - Dwell-time friction behavior of MoS2
    DELRIO, F.W. - Sandia National Laboratories
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 16
11:30 - 12:30
  • T02-S16.1
    11:30 - 11:50Oral presentation
    4ESS - Experimental Evaluation of Structural Characteristics of a Hybrid Thrust Foil Bearing Using Metal and Viscoelastic Material
    Masayuki Ochiai - Tokai University
  • T02-S16.2
    11:50 - 12:10Oral presentation
    4ESX - Wear in Electrified Rolling-Sliding Contacts
    YOUSUF, A. - Imperial College London
  • T02-S16.3
    12:10 - 12:30Oral presentation
    4ET2 - Tribological behavior of low viscosity synthetic ester base oils for Electric Vehicles under pure sliding electrified conditions
    BARRIGA, J. - Fundación Tekniker
OCEANIA IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 20
11:30 - 12:30
  • T06-S20.1
    11:30 - 11:50Oral presentation
    4F4W - Comparative evaluation of the abrasive wear response on brake pads of SUV and pickup trucks using a modified ASTM G65 method
    Angie Torres - Universidad San Francisco de Quito
  • T06-S20.2
    11:50 - 12:10Oral presentation
    4F6G - Niobium carbide as allrounder for machining and wear protection
    Eduardo Cannizza - EHT Consultoria em Engenharia Ltda
  • T06-S20.3
    12:10 - 12:30Oral presentation
    4FDP - Wear analysis of the friction stir welding (FSW) tool for the AA6063 aluminum welding process
    JAIMES, I. G. - Universidad Industrial de Santander
OCEANIA IX
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 18
11:30 - 12:30
  • T02-S18.1
    11:30 - 11:50Oral presentation
    4EY2 - Grease-lubricated hybrid rolling element bearings: friction torque and carbon footprint
    CALDERON-SALMERON, G. - Royal Institute of Technology / Kungliga Tekniska Högskolan
  • T02-S18.2
    11:50 - 12:10Oral presentation
    4EYT - Tribological Performance of Sustainable Biocomposite Brake Pads
    BARBA, J. H. D. - Universidade Tecnológica Federal do Paraná
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 16
11:30 - 12:30
  • T08-S16.1
    11:30 - 11:50Oral presentation
    4EQV - Commissioning of a Rheometer-Based Ball-on-Three-Plates Configuration for Pre-Clinical Friction Testing of Cartilage
    TORTORETO, L. - Rush University Medical Center
  • T08-S16.2
    11:50 - 12:10Oral presentation
    4ESA - MORPHING SURFACE TOPOGRAPHY AS PLATFORM FOR CULTURE CELLULAR BIOCONTACTS
    SANZIA, G. M. C. - Istituto Italiano di Tecnologia, University of Salento
  • T08-S16.3
    12:10 - 12:30Oral presentation
    4EVB - Advanced Preclinical Simulation – Physiological Adverse Activities on Metal-on-Polymer THRs and Ceramic-on-Ceramic Hip Resurfacing
    BEADLING, A. R. - University of Birmingham
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 16
11:30 - 12:30
  • T10-S16.1
    11:30 - 11:50Oral presentation
    4EYJ - Multiscale Entropy Coupling in Tribological Running-In: Surface Topography as a Mesoscale Entropy Reservoir
    BRODMANN, B. - OptoSurf GmbH
  • T10-S16.2
    11:50 - 12:10Oral presentation
    4EYV - A Multi-Scale Modelling of Metal-to-Metal Seals
    YASTREBOV, V. - CNRS, Mines Paris - PSL
  • T10-S16.3
    12:10 - 12:30Oral presentation
    4EZJ - Experimental characterization of particle-shape and surface-dependent tribological properties in railway ballast via 3D scanning and DEM calibration
    BORTOLETO, E. M. - Instituto Tecnológico Vale
OCEANIA VII
11:30 - 12:30
Triboeletric Nanogenerators for Energy Sensors - Session 04
11:30 - 12:30
  • T11-S04.2
    11:50 - 12:10Oral presentation
    4EFH - Decoupling the effects of normal and shear stresses on the triboelectrification of PTFE via in-situ tribometry
    UMER, J. - University of Birmingham
  • T11-S04.3
    12:10 - 12:30Oral presentation
    4ETJ - Taking Charge off Droplets: Advancing the Droplet TENG
    PRENDERGAST, O. - Imperial College London
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 16
11:30 - 12:30
  • T01-S16.1
    11:30 - 11:50Oral presentation
    4ETA - Influence of Environmental Molecules on the Nano-interface Structure of Hydrogenated Carbon Nitride Coatings under Dry Conditions
    KURIYAGAWA, K. - Tohoku University
  • T01-S16.2
    11:50 - 12:10Oral presentation
    4ETV - Molecular Dynamics Study of the Mechanical and Tribological Characteristics of Metal-Doped DLC Nanocomposite Coatings
    LEE, S. H. - Kyungpook (Kyungbook) National University
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:0016:00
EUROPA III-IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 17
14:00 - 16:00
  • T06-S17.1
    14:00 - 14:20Oral presentation
    4ETD - Numerical analysis of thermal fatigue behavior of AISI H13 tool steel produced by Power Bed Laser Fusion (PBF-LB/M)
    LIMA, V. A. D. - Universidade de São Paulo
  • T06-S17.2
    14:20 - 14:40Oral presentation
    4ETF - Fabrication of Electronics and Sensors using a Surface Energy-Directed Assembly Process
    CHAI, Z. - Tsinghua University
  • T06-S17.3
    14:40 - 15:00Oral presentation
    4ETP - Stretchable Serpentine Electrodes with High Fidelity Fabricated Using Orientation-Controlled Surface Energy-Directed Assembly
    YUAN, S. - Tsinghua University
  • T06-S17.4
    15:00 - 15:20Oral presentation
    4ETQ - Evolution of Corrosion-Induced Friction and Wear Mechanisms in Cylinder Liner Material under Methanol Engine Conditions
    LI, H. - Harbin Engineering University
  • T06-S17.5
    15:20 - 15:40Oral presentation
    4ETS - Effect of Additive Manufacturing Process (SLM vs. LMD) on Cavitation Erosion Resistance of SS316L
    Teixeira, J.H. - Universidade Estadual de Ponta Grossa
  • T06-S17.6
    15:40 - 16:00Oral presentation
    4EPB - Evaluation of Zinc Adhesion on Cast Iron Tool Materials
    BASTOS, P. P. B. - Universidade Federal de Santa Catarina
OCEANIA I
14:00 - 16:00
Surface Engineering - Session 20
14:00 - 16:00
  • T01-S20.2
    14:20 - 14:40Oral presentation
    4FAP - Robust & Eco-Efficient Design Toward Innovative Coatings
    POUPON, C. - AIRBUS
  • T01-S20.4
    15:00 - 15:20Oral presentation
    4FBR - Enhanced Tribological Performance of Fluorine-Doped Diamond-Like Carbon Films on Rough Stainless Steel Substrates
    RAMOS, B. B. - Universidade Federal de Santa Catarina
  • T01-S20.5
    15:20 - 15:40Oral presentation
    4FDK - Enhancing the tribological performances of aviation gears via tailored surface texturing
    DAI, Q.W. - Nanjing University of Aeronautics & Astronautics
  • T01-S20.6
    15:40 - 16:00Oral presentation
    4DMP - Experimental and Numerical Investigation of Tribological Performance and Failure Mechanisms in Nanocomposite Coatings
    Zulfiqar Khan - Bournemouth University
OCEANIA II
14:00 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 17
14:00 - 16:00
  • T02-S17.1
    14:00 - 14:20Oral presentation
    4ETB - Development of Thixotropic Materials based Eco-friendly Lubricants
    SINGH, M. K. - Indian Institute of Technology Kanpur
  • T02-S17.2
    14:20 - 14:40Oral presentation
    4EE4 - Investigate the effect of the hydrogen barrier coating on the hydrogen permeation rate into steel
    LODHI, A. P. S. - University of Leeds
  • T02-S17.4
    15:00 - 15:20Oral presentation
    4EWB - Effects of Copper Oxide Nanoparticles Additives on the Lubricity of BiodieselFuel
    COSTA, L. E. G. D. - Universidade Federal do Rio Grande do Norte
  • T02-S17.5
    15:20 - 15:40Oral presentation
    4EPA - Avocado oil as a sustainable base for top-of-rail friction modifiers
    NEVSHUPA, R. - CSIC
OCEANIA IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 21
14:00 - 16:00
  • T06-S21.1
    14:00 - 14:20Oral presentation
    4F6S - A COMPARATIVE STUDY OF ROLLING-CONTACT FATIGUE–INDUCED WEAR INTEMPERED LOWER BAINITE, UPPER BAINITE, AND PEARLITE
    GOLDENSTEIN, H. - Universidade de São Paulo
  • T06-S21.2
    14:20 - 14:40Oral presentation
    4FA6 - Mechanisms of material removal in Nd-Fe-B permanent magnet
    COSTA, E. C. - Universidade Federal de Santa Catarina
  • T06-S21.3
    14:40 - 15:00Oral presentation
    4FAY - In-situ High Resolution Digital Image Correlation (HRDIC) Analysis of Strain Distribution Around Artificially Generated WEL in Advanced Rail Steels
    BIAZON, L. - University of Sheffield
  • T06-S21.4
    15:00 - 15:20Oral presentation
    4FBK - Bringing the Dead Zone to Life: In-Situ Visualization of Interfacial Stagnation in Metal Cutting
    MSAOUBI, R. - Lund University
OCEANIA IX
14:00 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 19
14:00 - 16:00
  • T02-S19.1
    14:00 - 14:20Oral presentation
    4F4C - Functionalized Graphene-Derived Nano-additives as Solid Lubricants in UHMWPE composites
    MARTÍNEZ-RUBIO, P. M. - Lulea University of Technology / Luleå tekniska universitet
  • T02-S19.2
    14:20 - 14:40Oral presentation
    4F6P - Chemical analysis of the degradation of green lubricants in tribological tests
    OLIVEIRA, A. C. - Universidade Federal do Rio Grande
  • T02-S19.3
    14:40 - 15:00Oral presentation
    4FB6 - Tribological and mechanical performance of nano-SiO2 reinforced 3D printed multiscale PEEK composites
    EMAMI, N. - Luleå University of Technology
  • T02-S19.5
    15:00 - 15:20Oral presentation
    4EDR - On the effect of hydrogen absorption on wear behavior of steel 42CrMo4 in different microstructural states
    David Diaz - Universität Duisburg Essen
  • T02-S19.6
    15:20 - 15:40Oral presentation
    4EMT - Effect of Clearances on Bush Rotation Speed and Oil Film: X-ray CT Visualization in Floating Bush Bearings
    Nattawat Nilamann - Tokai University
OCEANIA X
14:00 - 16:00
Surface Engineering - Session 17
14:00 - 16:00
  • T01-S17.1
    14:00 - 14:20Oral presentation
    4EW6 - An Investigation of Temperature-Dependent Tribological Behavior and Wear Mechanisms of ID-HVOF-Sprayed Inconel 718 Coatings
    BLUNK, S. - McGill University
  • T01-S17.2
    14:20 - 14:40Oral presentation
    4EYM - Surface Texturing as a Game Changer for Forging Dies
    BARBA, J. H. D. - Universidade Tecnológica Federal do Paraná
  • T01-S17.3
    14:40 - 15:00Oral presentation
    4EYR - Electrified Tribological Behavior and Semiconducting Response of DLC Coatings on Tool Steel
    SANTOS, L. A. D. - Universidade de São Paulo
  • T01-S17.4
    15:00 - 15:20Oral presentation
    4EZR - Friction and wear performance of nano-multi layered DLC
    TANAKA, H. - Kyushu University
  • T01-S17.5
    15:20 - 15:40Oral presentation
    4F24 - Development of high hardness and high nitrogen content ta-CNx film
    SHOMA, W. - Nagoya University
  • T01-S17.6
    15:40 - 16:00Oral presentation
    4F26 - Load-insensitive mild wear in tool steels via duplex nitriding/AlCrN and a monoclinic ZrO2 nanoparticle topcoat
    DALCIN, R. L. - Universidade Federal de Santa Maria
14:2016:00
OCEANIA V
14:20 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 17
14:20 - 16:00
  • T08-S17.1
    14:20 - 14:40Oral presentation
    4EWH - Tactile friction under boundary lubrication: Effect of bulk concentration of surfactants on fingertip friction
    M S Bobji - Indian Institute of Science, Bengaluru
  • T08-S17.3
    15:00 - 15:20Oral presentation
    4EXF - A new route to assess soil abrasiveness and wear mechanisms for materials in tillage tools
    Urban Wiklund - Uppsala University / Uppsala Universitet
  • T08-S17.5
    15:40 - 16:00Oral presentation
    4F2W - Use of Pectin and Carrageenan as Low-Concentration Natural Polysaccharide Aqueous Lubricants
    AINSWORTH, A. A. - University of Birmingham
16:0016:30
16:00 - 16:30
16:00 - 16:30
  • C - Coffee break
16:3016:45
EUROPA III-IV
16:30 - 16:45
16:30 - 16:45
  • ASME - 2026 ASME International Mayo D. Hersey Award Ceremony
16:4517:30
EUROPA III-IV
16:45 - 17:30
16:45 - 17:30
  • CS - Closing Session & Awards