NORA, J. V. P.D. - Universidade Federal do Rio Grande do Sul Track: 01 - Surface Engineering
01.24F6N - Influence of the Wetting Angle of DLC Coatings Deposited on AISI 2205 in Pinon-Disk Wear Tests
LIMA, A. B. D. - Universidade Tecnológica Federal do Paraná Track: 01 - Surface Engineering
01.34ECS - Comparative analysis and optimization of tribological properties of burnished and vapour-blasted surfaces using TOPSIS
DZIERWA, A. - Rzeszow University of Technology Track: 01 - Surface Engineering
01.44EG4 - Evaluation of friction and electrochemical behavior of UHMWPE biopolymer against CoCrMo
César Sedano de la Rosa - Universidad de Guadalajara Track: 01 - Surface Engineering
01.54E4X - Tribological analysis of scratch resistance in plasma-sprayed thermal barrier coatings (TBCs)
REIS, D. A. P. - Universidade Federal de São Paulo Track: 01 - Surface Engineering
01.64EVC - Study of tribological and corrosion properties of two-layer coatings based on TiO2-Cr2O3/Ta
KAKIMZHANOV, D. - Shakarim University Track: 01 - Surface Engineering
01.74F6W - Tribological Behaviour of DLC-Coated Surfaces Under Electrified Lubricated Sliding Contacts
PEREIRA, D. G. - Universidade Federal de Santa Catarina Track: 01 - Surface Engineering
01.84EGM - Influence of Surface Free Energy on the Slurry-Jet Erosion Behavior of Thermally Sprayed Ceramic Coatings
GRZEBIELUCKA, E. C. - Universidade Tecnológica Federal do Paraná Track: 01 - Surface Engineering
01.94EHS - Tribological Behavior of Copper-Coated Basalt Fiber Reinforced Composites for EMI Shielding Applications
YOON,G. - Changwon National University Track: 01 - Surface Engineering
01.104EHG - Scratch Response in SS316L Across Rolling, Powder Metallurgy, and Additive Manufacturing
MACHADO, I. F. - Universidade de São Paulo Track: 01 - Surface Engineering
01.114EFW - Evaluation of the tribocorrosion behavior in seawater of multilayers Cr/CrC/Cr/DLC/Cr/CNx/Cr/DLC deposited by HiPIMS on AISI 4317 steel.
CHAGOYA-SERNA, J. - Universidad de Guadalajara Track: 01 - Surface Engineering
01.124EJF - Tribological properties of Fe-Cu-Ni sinters prepared by ball milling and hot pressing
BOROWIECKA-JAMROZEK, J. - Kielce University of Technology Track: 01 - Surface Engineering
01.134EZF - Wear behaviour of coatings processed by PTA-DED modified by pre-deposition of graphene nanoplatelets and graphite particles
SIPPEL, J. F. - Universidade Federal do Paraná Track: 01 - Surface Engineering
01.144EF2 - Analysis of wear behavior of single- and multilayer coatings subjected to cyclic micro-impact loading
KRUPA, J. - AGH University of Krakow Track: 01 - Surface Engineering
01.154ERG - Analysis of Dry Wear of Non-Heat-Treated Martensitic Stainless Steel Coating Applied in the Thermomechanical Steelmaking Process
NOVOA, J. - Universidade Federal de Pelotas Track: 01 - Surface Engineering
01.164EBS - Tribological Performance of Epoxy Composites Reinforced with Tailings of Scheelite
SOUZA, J. R. D. - Universidade Federal Rural do Semi Track: 01 - Surface Engineering
01.174EJW - Abrasive Wear and Friction Behaviour of 60%WC–NiCrBSi Hardfacing Pad Welds Modified with Rare Earth Oxides
KASIŃSKA, J. . - Kielce University of Technology Track: 01 - Surface Engineering
01.184EQC - Comparison of tribological properties of CrN and CrN/DLC coatings under lubrication with Ringer's solution and artificial saliva
RADOŃ-KOBUS, K. J. - Kielce University of Technology Track: 01 - Surface Engineering
01.194EQG - The effect of the concentration of 1-butyl-3-methylimidazolium methanesulfonate in the coolant on the tribological properties of a TiAlN coating
RADOŃ-KOBUS, K. J. - Kielce University of Technology Track: 01 - Surface Engineering
01.204F6Z - Friction and Wear Behavior of Vacuum-Sintered WC–Co with Recycled Grinding Sludge
VIEIRA, L. - Instituto Tecnológico de Aeronáutica Track: 01 - Surface Engineering
01.214E6P - Mechanical and tribological properties of DLC/MoS2 adaptive coatings
KOT, M. - University of Krakow Track: 01 - Surface Engineering
01.224F62 - Tribocorrosion and Scratch Behavior in Synthetic Seawater of DLC/CrC/CNx/CrC/Cr Multilayers Deposited by HIPIMS
MARTÍNEZ, M. F. - Universidad de Guadalajara Track: 01 - Surface Engineering
01.234E4H - Friction and Adhesion of Superhidrophobic and Icephobic Concrete Coatings
NOSONOVSKY, M. - University of Wisconsin-Milwaukee Track: 01 - Surface Engineering
01.244EHN - Effect of microstructure on the friction and wear mechanisms at the shoulder-clip interface in ductile cast iron railway components
MACHADO, N. K. D. V. - Universidade Federal de Ouro Preto Track: 01 - Surface Engineering
01.254FBS - Roughness and Friction of Textured and Coated Skin-Pass Work Rolls
MONTEIRO JR., P. L. - Universidade Federal de Uberlândia Track: 01 - Surface Engineering
01.264F4P - Wear resistance of duplex coatings on Ti–6Al–4V alloy obtained by nitriding with subsequent PVD deposition of TiN and ZrN
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University Track: 01 - Surface Engineering
01.274F4Q - Wear-resistant plasma-electrolytic oxidation coatings on Ti–6Al–4V alloy synthesised in an aluminate electrolyte containing chromium oxide
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University Track: 01 - Surface Engineering
01.284FDM - Synergistic integration of ionic liquid and lubricant microcapsules for epoxy coatings with concurrent self-healing and superior wear resistance
YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 01 - Surface Engineering
01.294F2Q - Build-height microstructural gradients as the primary driver of dry-sliding wear in WAAM ER308LSi
DALCIN, R. L. - Universidade Federal de Santa Maria Track: 01 - Surface Engineering
01.304F2A - Morphology-driven tribological performance of FFF-3D printed PLA composites reinforced with carbonaceous fillers
DALCIN, R. L. - Universidade Federal de Santa Maria Track: 01 - Surface Engineering
01.314FDS - Low-Friction Boron-Doped Hydrogenated DLC Coatings under High-Temperature and High-Vacuum Environments
ZHANG, R. - Institute of Science Tokyo Track: 01 - Surface Engineering
01.324ERH - Evolution of surface topography and micromechanical properties in polyurethane rail pads with service time
PAULA, S. B. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto Track: 01 - Surface Engineering
01.334EF6 - Evaluation of friction and electrochemical properties between PEEK biopolymer and Ti6Al4V alloy immersed in SBF
TOPETE-VELASCO, S. I. - Universidad de Guadalajara Track: 01 - Surface Engineering
01.344F4S - Effect of preliminary nitriding on fretting resistance of bioactive coating on Ti-6Al-4V alloy
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine Track: 01 - Surface Engineering
01.354F4V - Combining physical and diffusion surface treatments for enhance the mechanical and tribological properties of titanium alloy
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Vytautas Magnus University Track: 01 - Surface Engineering
01.364EXE - Influence of DLC Deposition Parameters on Tribological Properties of X38CrMo16 Tool Steel
DRABIK, S. - Kielce University of Technology Track: 01 - Surface Engineering
01.374EYH - Gray Cast Iron coated with Inconel 625 via plasma sintering.
CARMO, T. J. D. - Universidade de São Paulo Track: 01 - Surface Engineering
01.384ER6 - Effect of a Cr/CrC/TaCr/TaC/DLC multilayer coating deposited by HiPIMS on the tribocorrosion behavior of a biomedical CoCrMo alloy
GARCÍA-RAMÍREZ, U. A. - Instituto Tecnológico José Mario Molina Pasquel Y Henríquez, Universidad de Guadalajara Track: 01 - Surface Engineering
01.394EX4 - Tribocorrosion in Grinding Media: Evaluation Using an Adapted Wet Rubber Wheel Test – ASTM G105
CAMPIDELI, V. C. - Instituto Tecnológico Vale Track: 01 - Surface Engineering
01.404ESK - Microstructure and Tribological Properties of Cold Sprayed Amorphous Coatings
WOJCIECH ŻÓRAWSKI - Kielce University of Technology Track: 01 - Surface Engineering
01.414F4J - Tribological Characterization of a Laser-Processed Metal Matrix-Carbide Reinforced Composite
CHABAK, Y. - Institute of Materials Research, Slovak Academy of Science Track: 01 - Surface Engineering
01.424ERE - Laser Irradiation Effect on Friction Behaviour at Sliding Interfaces of Various DLC Coatings
NAKAMURA, Y. - Kyoto University Track: 01 - Surface Engineering
01.434ETC - Friction Characteristics of Valve Plate Pair of Servo Motor Pump for Launcher TVC Actuator Application
JIANGYU, Z. - Beihang University (Beijing University of Aeronautics and Astronautics) Track: 01 - Surface Engineering
11:30
12:30
11:3012:30
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 04
11:30 - 12:30
Chair: Liang Jiang (SWJTU) - China
T01-S04.1
11:30 - 11:50Oral presentation
4DQY - Accelerated Evaluation of Coating Performance Through Parallel Testing
Lais M. Lopes - Falex Tribology
T01-S04.2
11:50 - 12:10Oral presentation
4DRP - The Promise of Solid Lubricants
MARQUIS, E. - Technische Universität Wien
T01-S04.3
12:10 - 12:30Oral presentation
4DRZ - Tribological Behavior of Magnetron-Sputtered MAX Phases: The Role of Surface Oxides
Ronja Anton - German Aerospace Center
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
OCEANIA IV
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture - Anton Paar
14:40
16:00
14:4016:00
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 05
14:40 - 16:00
Chair: Xiuqin Bai (WHUT) - China
T01-S05.1
14:40 - 15:00Oral presentation
4DSJ - 3 in 1 powder coatings with implemented antifriction function
Dr. Michaela Gedan-Smolka - Leibniz-Institut für Polymerforschung Dresden
T01-S05.2
15:00 - 15:20Oral presentation
4DSQ - Simulating Damage Mechanisms in Quasistatic Sliding Contact of Friction Enhancing Surface Structures
Jonathan Schanner - Technische Universität Chemnitz
T01-S05.3
15:20 - 15:40Oral presentation
4DSS - Processing Relationships in Hybrid MXene Coatings for Advanced Solid Lubrication
GACHOT, C. - Technische Universität Wien
T01-S05.4
15:40 - 16:00Oral presentation
4DTG - Understanding tribological behavior of new REACh compliants sealed anodization of aluminum alloys
Marc Schmittbuhl - École Centrale de Lyon
16:00
16:40
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:40
17:40
16:4017:40
OCEANIA X
16:40 - 17:40
Surface Engineering - Session 06
16:40 - 17:40
Chair: Tushar Khosla (RTEC) - United States
T01-S06.1
16:40 - 17:00Oral presentation
4DVE - Regulating Composition, Structure, and Friction Properties of Sputtered MoS₂ Films through Trace Metal (Pt, Au, Cu) Doping
Bin Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
T01-S06.2
17:00 - 17:20Oral presentation
4DWB - Influence of MoS₂ content on the tribological behavior of double-transfer solid lubrication systems
Thomas Rey - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
T01-S06.3
17:20 - 17:40Oral presentation
4DWE - Tribological properties of DLC coatings in high-pressure gaseous hydrogen
Johnny Dufils - IREIS - HEF Group
18:00
19:30
18:0019:30
EUROPA III-IV
18:00 - 19:30
18:00 - 19:30
RT - Round table International Cooperation
09:30
10:50
09:3010:50
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 07
09:30 - 10:50
Chair: Huan Liu (THU) - China
T01-S07.1
09:30 - 09:50Oral presentation
4E44 - Effect of laser shock peening on tribological performance of 15CrNiMo carburized layer in multi-body friction systems
WANG, Y. - Southwest Petroleum University
T01-S07.2
09:50 - 10:10Oral presentation
4EBB - Phosphate coatings for protection of steels surfaces
CROCKETT, R. - Swiss Federal Laboratories for Materials Science and Technology
T01-S07.3
10:10 - 10:30Oral presentation
4EBV - Thermal isolation effect of DLC coatings on steel substrates
KALIN, M. - University of Ljubljana
T01-S07.4
10:30 - 10:50Oral presentation
4DPW - A bioinspired approach using hierarchically structured DLC multilayer coatings for tribological applications
Markus Polzer - Friedrich-Alexander-Universität Erlangen-Nürnberg
10:50
11:30
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 08
11:30 - 12:30
Chair: Tianyi Han (TSINGHUA) - China
T01-S08.1
11:30 - 11:50Oral presentation
4ECC - Slurry erosive wear of DLC (a-C) coated alloys for oil and gas applications
OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
T01-S08.2
11:50 - 12:10Oral presentation
4ECE - Study on high temperature tribological properties of self lubricating coatings
CHENG, B. - Tsinghua University
T01-S08.3
12:10 - 12:30Oral presentation
4ECJ - Insights into the tribological and micro-impact behaviour of multilayer coatings based on TiN, CrN, ZrN, TiCrN and TiZrN
TOBOŁA, D. - Łukasiewicz Research Network – Krakow Institute of Technology
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
14:40
16:00
14:4016:00
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 09
14:40 - 16:00
Chair: Pierluigi Bilotto (TU WIEN) - Austria
T01-S09.1
14:40 - 15:00Oral presentation
4DZE - Influence of the Steel Disk Topography on the Friction Behavior of Wet Brakes and Clutches
STROBL, P. - Technical University of Munich, Gear Research Center
T01-S09.2
15:00 - 15:20Oral presentation
4ECW - Influence of Surface Slip on Hydrofoil Drag and Flow Noise Characteristics
ZHU, M. - Tsinghua University
T01-S09.3
15:20 - 15:40Oral presentation
4ED6 - Boride-based solid lubricants for extreme environments
PÖLZLBERGER, D. - TU Wien
T01-S09.4
15:40 - 16:00Oral presentation
4EDT - High-Performance Flexible Electronics Fabricated Using a Surface Energy-Directed Assembly Process on Ultrathin Polyimide Substrates
LI, Z. - Tsinghua University
16:00
16:40
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:40
18:00
16:4018:00
OCEANIA X
16:40 - 18:00
Surface Engineering - Session 10
16:40 - 18:00
Chair: Edoardo Marquis (TU WIEN) - Austria
T01-S10.1
16:40 - 17:00Oral presentation
4EEN - Lubricant film thickness for EHD contacts with diamond-like carbon coatings
POLAJNAR, M. - University of Ljubljana
T01-S10.2
17:00 - 17:20Oral presentation
4EEZ - Understanding the color variation of TiO2 thin layers by analyzing wear mechanisms of the oxide layer
FRIDRICI, V. - Centrale Lyon
T01-S10.3
17:20 - 17:40Oral presentation
4EG6 - Optimization of Tribological Properties Based on the Example of Two-Component Surface Layer
SEP, J. - Rzeszow University of Technology
19:30
22:30
19:3022:30
Asia
19:30 - 22:30
19:30 - 22:30
GD - Gala Dinner
09:30
10:50
09:3010:50
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 11
09:30 - 10:50
Chair: Edoardo Marquis (TU WIEN) - Austria
T01-S11.1
09:45 - 10:10Invited Speaker
4EEM - Design and Protection Strategies of Organic Coatings
Zhan, S. - China Academy of Machinery, Wuhan Research Institute of Materials Protection Co., Ltd.
T01-S11.3
10:30 - 10:50Oral presentation
4EKW - Development and characterisation of highly ordered and aligned nanocomposite coating through anodization for tribological applications
S Ugar - Indian Institute of Science, Bengaluru
10:50
11:30
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 12
11:30 - 12:30
Chair: Ken Nakano (YNU) - Japan
T01-S12.1
11:30 - 11:50Oral presentation
4EMD - Effect of gas nitriding on tribological and fretting characteristics of 3D-printed Ti-6Al-4V alloy in simulated body fluid
LAVRYS, S. - Vytautas Magnus University
T01-S12.2
11:50 - 12:10Oral presentation
4EKT - Influence of surface texture edge angle on tribological performance of laser textured tools in sheet metal forming
GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
T01-S12.3
12:10 - 12:30Oral presentation
4EPV - Surface Topography effect on Compound Layer Thickness in Plasma-Nitrided Gray Cast Iron
AQUINO, B. B. D. - Universidade Federal de Santa Catarina
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
14:40
16:00
14:4016:00
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 13
14:40 - 16:00
Chair: Noritsugu Umehara
T01-S13.1
14:40 - 15:00Oral presentation
4EQ4 - Hydrophobic Surface Functionalization via Ultrashort-Pulse Laser Texturing
VIEIRA, A. - Centro Universitário SENAI São Paulo, Universidade de São Paulo
T01-S13.2
15:00 - 15:20Oral presentation
4EQE - Slurry-erosive wear behaviour of a-C:Si:O:H coatings deposited by PECVD
SILVA, P. - Universidade Federal do Espírito Santo
T01-S13.4
15:40 - 16:00Oral presentation
4EQW - Effect of Plasma Nitriding on Abrasive Wear Resistance of Chromium White Cast Iron
CARDOSO, E. D. S. - Universidade Federal de Santa Catarina
16:00
16:40
16:0016:40
America
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:40
17:40
16:4017:40
OCEANIA X
16:40 - 17:40
Surface Engineering - Session 14
16:40 - 17:40
Chair: MASAYUKI OCHIAI (U-TOKAI) - Japan
T01-S14.1
16:40 - 17:00Oral presentation
4ERP - Effects of ultrasonic surface rolling processing on the surface properties of 4Cr13 stainless steel
Luo, X. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
T01-S14.2
17:00 - 17:20Oral presentation
4ESD - Enhanced High-Temperature Tribological Properties of Double Co-Doped DLC Coatings Prepared by FCVA
ZHANG, R. - Institute of Science Tokyo
T01-S14.3
17:20 - 17:40Oral presentation
4ERV - Tribological performance of single-step fs-laser-induced dual-scale surface structures on Ti6Al4V
ZABALA, A. - Universidad de Mondragon Mondragon Unibertsitatea
09:30
10:50
09:3010:50
OCEANIA I
09:30 - 10:50
Surface Engineering - Session 18
09:30 - 10:50
Chair: Xiuqin Bai (WHUT) - China
T01-S18.3
10:10 - 10:30Oral presentation
4F4D - Effect of triangular shaped textures on the performance of mechanical seals
BRUNETIERE, N. - Institut Pprime
T01-S18.4
10:30 - 10:50Oral presentation
4F4X - From Plasma Surface Alloying to Integrated Surface Engineering Strategies: a Route to Densify Gray Iron Surfaces
PIGOSSO, T. - Universidade Federal de Santa Catarina
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 15
09:30 - 10:50
Chair: Hiroyoshi Tanaka (KYUSHU-U) - Japan
T01-S15.1
09:30 - 09:50Oral presentation
4ESF - Tribocorrosive Wear in Miller Tests of Tool Steels and High Chromium Cast Iron Used in Mining Industry
SANTOS, J. M. A. D. - Instituto Tecnológico Vale
T01-S15.2
09:50 - 10:10Oral presentation
4ESH - Influence of microstructure and hardness of WC-Co studs on laboratory and HPGR field test performance
SANTOS, J. M. A. D. - Instituto Tecnológico Vale
T01-S15.4
10:10 - 10:30Oral presentation
4ET6 - The effect of structure on the wear resistance of a hydrotalcite-like coating grown on Zn alloy substrate
ZIMOWSKI, S. - AGH University of Krakow
10:50
11:30
10:5011:30
America
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
OCEANIA I
11:30 - 12:30
Surface Engineering - Session 19
11:30 - 12:30
Chair: Carsten Gachot
T01-S19.1
11:30 - 11:50Oral presentation
4F6M - Tribological Behavior of Plasma-Nitrided Steels Evaluated by Gear Contact Fatigue Test
ANDRIONI, T. D. - Universidade Federal de Santa Catarina
T01-S19.3
11:50 - 12:10Oral presentation
4FAB - Effect of plasma nitriding on electrified tribological contacts: the case of oil-lubricated AISI 4140 steel
PIRES, J. A. - Universidade Federal de Santa Catarina
12:10 - 12:30Oral presentation
4EBC - Dwell-time friction behavior of MoS2
DELRIO, F.W. - Sandia National Laboratories
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 16
11:30 - 12:30
Chair: Ken Nakano (YNU) - Japan
T01-S16.1
11:30 - 11:50Oral presentation
4ETA - Influence of Environmental Molecules on the Nano-interface Structure of Hydrogenated Carbon Nitride Coatings under Dry Conditions
KURIYAGAWA, K. - Tohoku University
T01-S16.2
11:50 - 12:10Oral presentation
4ETV - Molecular Dynamics Study of the Mechanical and Tribological Characteristics of Metal-Doped DLC Nanocomposite Coatings
LEE, S. H. - Kyungpook (Kyungbook) National University
T01-S01.2 Laser Surface Texturing for Enhanced Tribological Performance of Polyetheretherketone (PEEK)
15:20 - 15:40 Oral presentation
Authors
Laura Peña Parás; Demófilo Maldonado Cortés; Fernando Xavier Pozos; Daniel Durán; Javier A. Ortega; Melvin Alvarez Vera
Presenter
Laura Peña Parás - Universidad de Monterrey
Presentation details
T01-S01.3 Optimization of Cutting Tool Life Through Laser Surface Texturing and Extreme Pressure Lubricants
15:40 - 16:00 Oral presentation
Authors
Demófilo Maldonado Cortés; Laura Peña Parás; José Antonio Charles Herrera
Presenter
Demófilo Maldonado Cortés - Universidad de Monterrey
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
T01-S02.1 Humidity-Driven Tribological Mechanisms of Ground Micro-Arc Oxidation Coatings on Aluminium Alloy
16:40 - 17:00 Oral presentation
Authors
Karl Delbé; Jean Denape; Jean-Yves Paris; Louis Rodriguez
Presenter
Karl Delbé - Université de Technologie de Tarbes
Presentation details
T01-S02.2 Tribologically Modified Tooth Geometries of Worm Wheels using AutomatedOptimization Algorithm
17:00 - 17:20 Oral presentation
Authors
Luis Haug; Simon Tillmann; Michael Geitner; Karsten Stahl
Presenter
Luis Haug - Technical University of Munich, Gear Research Centre
Presentation details
T01-S02.3 Molybdenum Coatings for Extreme Environments: Tribological Study of PVD and APS Coatings
17:20 - 17:40 Oral presentation
Authors
Ricardo Alves da Silva Crespo Martins; Dennis Konopka; Martin Nicolaus; Florian Pape; Benedict Rothammer; Markus Polzer; Kai Möhwald; Gerhard Poll; Max Marian
Presenter
Ricardo Alves da Silva Crespo Martins - Leibniz University Hannover
Presentation details
Forum Young Tribologists - Roundtable Mentoring
18:20 - 19:20
The roundtable session is designed to foster intergenerational dialogue and provide valuable guidance to emerging tribologists. By bringing together senior and early-career professionals, it enables open, insightful discussions about the future of the field. Geared toward young tribologists, the session offers a unique chance to learn from experienced researchers and industry leaders as they share perspectives on new trends, technological challenges, and evolving career opportunities.
Moderator:
Prof. Salete Martins Alves | Federal University of Rio Grande do Norte (Brazil)
Panelists:
Dr Alfredo Fantetti | Imperial College London (UK)
Prof. Carsten Gachot | TU Wien (Austria)
Prof. Hong Liang | Texas A&M University (USA)
Prof. Nicholas D. Spencer | ETH Zürich (Switzerland)
Presentation details
Forum Young Tribologists - Evening
19:30 - 21:30
Forum Young Tribologists - Evening Party
Presentation details
T01-S03.1 Design of macroscale solid superlubricating surface on steel substrate
09:35 - 10:00 Invited Speaker
Authors
Li Ji; Hongxuan Li; Panpan Li; Huidi Zhou; Jianmin Chen; Chao Wang; Xiaohong Liu
Presenter
WANG, C. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
T01-S03.2 Defect-controlled hydrogenated tetrahedral amorphous carbon with enhanced corrosion and wear resistance in NH4OH dilute environment
10:00 - 10:20 Oral presentation
Authors
Jae-Il Kim; Ji-Woong Jang; Jongkuk Kim; Young-Jun Jang
Presenter
Jae-Il Kim - Korea Institute of Materials Science
Presentation details
T01-S03.3 Transition Metal Carbo Chalcogenides (TMCCs): a novel family of 2D solid lubricants
10:20 - 10:40 Oral presentation
Authors
Edoardo Marquis; Michael Naguib; Carsten Gachot
Presenter
Edoardo Marquis - Technische Universität Wien
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
01.1 Duplex Treatement of AISI H13 Tool Steel: Hot-Forging Testing
10:50 - 11:30 Poster
Authors
Alexandre da Silva Rocha; João Vitor Piovesan Dalla Nora; Felipe Canal; Frederico Murilo Wlassak; Steffen Aichholz; Rafael Silva
Presenter
NORA, J. V. P.D. - Universidade Federal do Rio Grande do Sul
Presentation details
01.2 Influence of the Wetting Angle of DLC Coatings Deposited on AISI 2205 in Pinon-Disk Wear Tests
10:50 - 11:30 Poster
Authors
Andressa Boeno de Lima; Edson Cezar Grzebielucka; Helga Elisabeth Pinheiro Schluter; Anderson Geraldo Marenda Pukasiewicz; Denilson José Marcolino de Aguiar
Presenter
LIMA, A. B. D. - Universidade Tecnológica Federal do Paraná
Presentation details
01.3 Comparative analysis and optimization of tribological properties of burnished and vapour-blasted surfaces using TOPSIS
10:50 - 11:30 Poster
Authors
Andrzej Dzierwa
Presenter
DZIERWA, A. - Rzeszow University of Technology
Presentation details
01.4 Evaluation of friction and electrochemical behavior of UHMWPE biopolymer against CoCrMo
10:50 - 11:30 Poster
Authors
César Sedano de la Rosa; Sara Ivette Topete Velasco; Martín Flores Martínez; Ezequiel Alberto Gallardo Hernández; Ulises Alberto García Ramírez; María de Montserrat García Rivera
Presenter
César Sedano de la Rosa - Universidad de Guadalajara
Presentation details
01.5 Tribological analysis of scratch resistance in plasma-sprayed thermal barrier coatings (TBCs)
10:50 - 11:30 Poster
Authors
Bianca Costa Rodrigues; Renata Jesuina Takahashi; Vera Lúcia de Othéro de Brito; Danieli Aparecida Pereira Reis
Presenter
REIS, D. A. P. - Universidade Federal de São Paulo
Presentation details
01.6 Study of tribological and corrosion properties of two-layer coatings based on TiO2-Cr2O3/Ta
01.7 Tribological Behaviour of DLC-Coated Surfaces Under Electrified Lubricated Sliding Contacts
10:50 - 11:30 Poster
Authors
Diandra Grossmann Pereira; Tainan Daniel Andrioni; Júlia Afonso Pires; Diego Berti Salvaro; Cristiano Binder
Presenter
PEREIRA, D. G. - Universidade Federal de Santa Catarina
Presentation details
01.8 Influence of Surface Free Energy on the Slurry-Jet Erosion Behavior of Thermally Sprayed Ceramic Coatings
10:50 - 11:30 Poster
Authors
Arthur Soares Fernandes Ferreira; Edson Cezar Grzebielucka; Hipolito Carvajal Fals; Irene Bida de Araújo Siqueira; Helga Elisabeth Pinheiro Schluter; Anderson G.M. Pukasiewicz
Presenter
GRZEBIELUCKA, E. C. - Universidade Tecnológica Federal do Paraná
Presentation details
01.9 Tribological Behavior of Copper-Coated Basalt Fiber Reinforced Composites for EMI Shielding Applications
10:50 - 11:30 Poster
Authors
Gihyun Yoon; Dogyun Byeon; Sungmin Yoon
Presenter
YOON,G. - Changwon National University
Presentation details
01.10 Scratch Response in SS316L Across Rolling, Powder Metallurgy, and Additive Manufacturing
10:50 - 11:30 Poster
Authors
Izabel Fernanda Machado; Samira Tahanzadeh; Vanessa Seriacopi; Daniel Rodrigues
Presenter
MACHADO, I. F. - Universidade de São Paulo
Presentation details
01.11 Evaluation of the tribocorrosion behavior in seawater of multilayers Cr/CrC/Cr/DLC/Cr/CNx/Cr/DLC deposited by HiPIMS on AISI 4317 steel.
10:50 - 11:30 Poster
Authors
Jesús Chagoya-Serna; Ulises Alberto García Ramírez; Sara Ivette Topete Velasco; Jesús Alejandro Rodríguez-Herrera; Andrés González-Hernández; Luis Alberto López-Tejeda; Martín Flores Martínez
Presenter
CHAGOYA-SERNA, J. - Universidad de Guadalajara
Presentation details
01.12 Tribological properties of Fe-Cu-Ni sinters prepared by ball milling and hot pressing
10:50 - 11:30 Poster
Authors
Joanna Borowiecka-Jamrozek
Presenter
BOROWIECKA-JAMROZEK, J. - Kielce University of Technology
Presentation details
01.13 Wear behaviour of coatings processed by PTA-DED modified by pre-deposition of graphene nanoplatelets and graphite particles
10:50 - 11:30 Poster
Authors
João Felipe Sippel; Ana Sofia Clímaco Monteiro D’Oliveira
Presenter
SIPPEL, J. F. - Universidade Federal do Paraná
Presentation details
01.14 Analysis of wear behavior of single- and multilayer coatings subjected to cyclic micro-impact loading
10:50 - 11:30 Poster
Authors
Jolanta Krupa; Sławomir Zimowski
Presenter
KRUPA, J. - AGH University of Krakow
Presentation details
01.15 Analysis of Dry Wear of Non-Heat-Treated Martensitic Stainless Steel Coating Applied in the Thermomechanical Steelmaking Process
10:50 - 11:30 Poster
Authors
Josiara Novoa; Márcio L. A. Cunha; Hellen T. S. Moreira; Henara L. Costa
Presenter
NOVOA, J. - Universidade Federal de Pelotas
Presentation details
01.16 Tribological Performance of Epoxy Composites Reinforced with Tailings of Scheelite
10:50 - 11:30 Poster
Authors
Clarissa Danielle Mendonça de Oliveira Guimarães; Hong Liang; Íngride Pamilly Ribeiro Araújo de Oliveira; Juliana Ricardo de Souza
Presenter
SOUZA, J. R. D. - Universidade Federal Rural do Semi
Presentation details
01.17 Abrasive Wear and Friction Behaviour of 60%WC–NiCrBSi Hardfacing Pad Welds Modified with Rare Earth Oxides
10:50 - 11:30 Poster
Authors
Justyna Kasińska
Presenter
KASIŃSKA, J. . - Kielce University of Technology
Presentation details
01.18 Comparison of tribological properties of CrN and CrN/DLC coatings under lubrication with Ringer's solution and artificial saliva
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Vytautas Magnus University
Presentation details
01.36 Influence of DLC Deposition Parameters on Tribological Properties of X38CrMo16 Tool Steel
10:50 - 11:30 Poster
Authors
Szymon Drabik; Monika Madej; Katarzyna Piotrowska
Presenter
DRABIK, S. - Kielce University of Technology
Presentation details
01.37 Gray Cast Iron coated with Inconel 625 via plasma sintering.
10:50 - 11:30 Poster
Authors
Thiago Jesus do Carmo; Jurandir Marcos Sá de Sousa; Juliane Ribeiro da Cruz
Presenter
CARMO, T. J. D. - Universidade de São Paulo
Presentation details
01.38 Effect of a Cr/CrC/TaCr/TaC/DLC multilayer coating deposited by HiPIMS on the tribocorrosion behavior of a biomedical CoCrMo alloy
10:50 - 11:30 Poster
Authors
Ulises Alberto García Ramírez; Jesús Chagoya-Serna; Luis Alberto López-Tejeda; Sara Ivette Topete Velasco; César Sedano de la Rosa; Martín Flores Martínez
Presenter
GARCÍA-RAMÍREZ, U. A. - Instituto Tecnológico José Mario Molina Pasquel Y Henríquez, Universidad de Guadalajara
Presentation details
01.39 Tribocorrosion in Grinding Media: Evaluation Using an Adapted Wet Rubber Wheel Test – ASTM G105
10:50 - 11:30 Poster
Authors
Victor Cardoso Campideli; Eleir Mundim Bortoleto
Presenter
CAMPIDELI, V. C. - Instituto Tecnológico Vale
Presentation details
01.40 Microstructure and Tribological Properties of Cold Sprayed Amorphous Coatings
10:50 - 11:30 Poster
Authors
Wojciech Żórawski; Anna Trelka-Druzic; Anna Góral; Medard Makrenek; Szymon Kowalski
Presenter
WOJCIECH ŻÓRAWSKI - Kielce University of Technology
Presentation details
01.41 Tribological Characterization of a Laser-Processed Metal Matrix-Carbide Reinforced Composite
10:50 - 11:30 Poster
Authors
Yuliia Chabak; VASYL IEFREMENKO; Bohdan Efremenko
Presenter
CHABAK, Y. - Institute of Materials Research, Slovak Academy of Science
Presentation details
01.42 Laser Irradiation Effect on Friction Behaviour at Sliding Interfaces of Various DLC Coatings
01.43 Friction Characteristics of Valve Plate Pair of Servo Motor Pump for Launcher TVC Actuator Application
10:50 - 11:30 Poster
Authors
ZOU jiangyu; Dingchong LYU; Jian FU
Presenter
JIANGYU, Z. - Beihang University (Beijing University of Aeronautics and Astronautics)
Presentation details
T01-S04.1 Accelerated Evaluation of Coating Performance Through Parallel Testing
11:30 - 11:50 Oral presentation
Authors
Lais M. Lopes
Presenter
Lais M. Lopes - Falex Tribology
Presentation details
T01-S04.2 The Promise of Solid Lubricants
11:50 - 12:10 Oral presentation
Authors
Edoardo Marquis; Carsten Gachot
Presenter
MARQUIS, E. - Technische Universität Wien
Presentation details
T01-S04.3 Tribological Behavior of Magnetron-Sputtered MAX Phases: The Role of Surface Oxides
12:10 - 12:30 Oral presentation
Authors
Ronja Anton; Daniel Pölzlberger; Xudong Sui; Nadine Laska; Carsten Gachot
Presenter
Ronja Anton - German Aerospace Center
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture - Anton Paar
12:40 - 13:40
Exotic Tribology: Cartilage to Contact Lenses
Kartik Pondicherry1, * and Paul Staudinger1
1Anton Paar GmbH, Anton Paar Strasse 20, 8054, Graz, Austria
*Email: kartik.pondicherry@anton-paar.com
Biotribology encompasses applications involving food and beverages, personal care, biological interfaces, and medical devices, where soft contacts interact with the human body. Although these interfaces generally operate under lower contact pressures than conventional tribological systems, their study presents unique challenges, including the selection of appropriate biological surrogates, contact configurations, test parameters, specimen conditioning, and data interpretation. This work presents case studies on food and beverages, the ocular system, skin, cosmetics, tissue, cartilage, implants, and personal care products, evaluated using a rheometer-based tribometer with application-specific contact configurations. In addition to extended Stribeck curves, breakaway friction measurements were performed. The results demonstrate the critical influence of specimen selection on tribological behavior, with appropriate surrogates enhancing the differentiation between samples. Furthermore, statistical analysis of food and beverage tribology data established correlations between frictional response and sensory mouthfeel attributes obtained from an expert panel.
Presentation details
T01-S05.1 3 in 1 powder coatings with implemented antifriction function
14:40 - 15:00 Oral presentation
Authors
Dr. Michaela Gedan-Smolka; Marcel Tuschla; Peter Scholz; Paul Pavlov
Presenter
Dr. Michaela Gedan-Smolka - Leibniz-Institut für Polymerforschung Dresden
Presentation details
T01-S05.2 Simulating Damage Mechanisms in Quasistatic Sliding Contact of Friction Enhancing Surface Structures
15:00 - 15:20 Oral presentation
Authors
Jonathan Schanner; Alexander Hasse
Presenter
Jonathan Schanner - Technische Universität Chemnitz
Presentation details
T01-S05.3 Processing Relationships in Hybrid MXene Coatings for Advanced Solid Lubrication
15:20 - 15:40 Oral presentation
Authors
Martin Nastran; Alex Werdaner; Christina Danecker; Edoardo Marquis; Carsten Gachot
Presenter
GACHOT, C. - Technische Universität Wien
Presentation details
T01-S05.4 Understanding tribological behavior of new REACh compliants sealed anodization of aluminum alloys
15:40 - 16:00 Oral presentation
Authors
Marc Schmittbuhl; Gilles Auregan; Alex Jacoboni; Joffrey Tardelli; Marjorie Cavarroc-Weimer; Vincent FRIDRICI
Presenter
Marc Schmittbuhl - École Centrale de Lyon
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
T01-S06.1 Regulating Composition, Structure, and Friction Properties of Sputtered MoS₂ Films through Trace Metal (Pt, Au, Cu) Doping
16:40 - 17:00 Oral presentation
Authors
Bin Zhang
Presenter
Bin Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
T01-S06.2 Influence of MoS₂ content on the tribological behavior of double-transfer solid lubrication systems
17:00 - 17:20 Oral presentation
Authors
Thomas Rey; Eric Papin; Fabrice Dassenoy; Vincent FRIDRICI
Presenter
Thomas Rey - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
Presentation details
T01-S06.3 Tribological properties of DLC coatings in high-pressure gaseous hydrogen
17:20 - 17:40 Oral presentation
Authors
Johnny Dufils; Bogdan Munteanu; Etienne Macron
Presenter
Johnny Dufils - IREIS - HEF Group
Presentation details
Round table International Cooperation
18:00 - 19:30
Seamless collaboration between world-class research institutions and industrial pioneers is vital to advancing tribological innovation and solving complex engineering challenges on a global scale. This roundtable discussion focuses on developing robust international cooperation strategies that effectively align cutting-edge academic tribology research with practical industrial needs.
Moderated by Dr David Carlos Domingos (Director of International Business Development, Fraunhofer Institute for Production Systems and Design Technology, Germany), the session brings together a distinguished panel of experts: Prof. Alvaro Toubes Prata (CEO, Embrapii - Brazilian Company for Industrial Research and Innovation, Brazil), Dipl. Ing. (FH) Christian Kunze (Deputy CEO, FVA - Research Association for Drive Technology, Germany), and Prof. Shirong Ge (China University of Mining and Technology, Beijing, China). Together, they will share key perspectives on overcoming barriers and driving sustainable global innovation in the field.
Presentation details
T01-S07.1 Effect of laser shock peening on tribological performance of 15CrNiMo carburized layer in multi-body friction systems
09:30 - 09:50 Oral presentation
Authors
Guorong Wang; Yang Wang; YANG WANG; Lin Zhong; Gang Wei
Presenter
WANG, Y. - Southwest Petroleum University
Presentation details
T01-S07.2 Phosphate coatings for protection of steels surfaces
09:50 - 10:10 Oral presentation
Authors
Rowena Crockett; Ueli Angst; Mohammad Alinezhadfar
Presenter
CROCKETT, R. - Swiss Federal Laboratories for Materials Science and Technology
Presentation details
T01-S07.3 Thermal isolation effect of DLC coatings on steel substrates
10:10 - 10:30 Oral presentation
Authors
Mitjan Kalin; Elton De Lima Savi; Nelson G. C. Astrath; Luis Carlos Malacarne; Eduardo Victor Bergmann; Tomaž Požar
Presenter
KALIN, M. - University of Ljubljana
Presentation details
T01-S07.4 A bioinspired approach using hierarchically structured DLC multilayer coatings for tribological applications
10:30 - 10:50 Oral presentation
Authors
Markus Polzer; Alexandra Neumann; Benedict Rothammer; Sandro Wartzack
Presenter
Markus Polzer - Friedrich-Alexander-Universität Erlangen-Nürnberg
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
T01-S08.1 Slurry erosive wear of DLC (a-C) coated alloys for oil and gas applications
11:30 - 11:50 Oral presentation
Authors
Juliana Souza de Oliveira; Rubson Mação Camporez; Natasha Vieira Dantas; Newton Kiyoshi Fukumasu; ANDRÉ PAULO TSCHIPTSCHIN; Nathan Fantecelle Strey; Cherlio Scandian
Presenter
OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
Presentation details
T01-S08.2 Study on high temperature tribological properties of self lubricating coatings
Luo, X. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
Presentation details
T01-S14.2 Enhanced High-Temperature Tribological Properties of Double Co-Doped DLC Coatings Prepared by FCVA